06-21-2011
Can you please explain :
if [ "$?" -eq "0" ]
10 More Discussions You Might Find Interesting
1. Solaris
Running Solaris 9 with SVM. I'm not that familiar with it, but metastat output gives "needs maintenance" message on 2 of the mirrors. There are no errors in /var/adm/messages. What do I need to do to fix this error? Thanks. (14 Replies)
Discussion started by: dangral
14 Replies
2. Solaris
hi all,
can someone pls pass on your suggestion?
Firs thing I am testing a script which checks for the pattern 'Needs Maintenance' from metastat output and prints some messages in the screen. So i need to simulate an error in mirrored disk for metastat to give this message 'Needs Maintenance'.... (3 Replies)
Discussion started by: srirammad007
3 Replies
3. Solaris
Hi frnds,
I want excute the command through shell script.
command is #metastat
once u excute this cmd we will get some information on raid configuration status.
Once it is working properly we will get status 'okey' otherwise will get status 'error'.
i want to script for
once we get... (5 Replies)
Discussion started by: arjunreddy3
5 Replies
4. Solaris
My company is running a solaris 2.7 machine. The machine is getting slow recently. I have no expert in solaris. Please help.
I checked the log in /var/adm/message:
I also checked with the command iostat -nE. It returns:
Metastat returns the followings:
What should i do now?... (10 Replies)
Discussion started by: nickychung
10 Replies
5. Filesystems, Disks and Memory
I have to rescue the volumes in a soloris 7 machine. The metastat returns the following result:
d6 is dying with iostat -nE returns Harderror 3, Transports error 9
Can some offer me some help? Thank you very much. (6 Replies)
Discussion started by: nickychung
6 Replies
6. Solaris
Hi people,
I have on problem when execute the command METASTAT...
d60: Soft Partition
Device: d10
State: Errored
Size: 12582912 blocks (6.0 GB)
Someone help me?
Thank you very much (4 Replies)
Discussion started by: denisgomes
4 Replies
7. Solaris
Hi friends,
I'm newbie to SVM.
Just wanna try installed it on one of our server (to do mirroring for disk0 and disk1) but i think im lost until now. :(
the steps i've taken is as below:-
1.prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2
2.metadb -a -c 3 -f c1t0d0s7... (3 Replies)
Discussion started by: kronenose
3 Replies
8. Solaris
Greetings
How can i restore metastat db after a solaris upgrade (9 to 10)?
will it work if i save and restore /etc/vfstab and /etc/lvm/md.cf file?
root@netad# metastat
d35: Mirror
Submirror 0: d38
State: Okay
Submirror 1: d39
State: Okay
Pass:... (2 Replies)
Discussion started by: kashif_islam
2 Replies
9. Shell Programming and Scripting
Hi,
after issuing metastat command I am getting output as follows
Actually these soft partitions are more than 100.
I want output as Device Name & Size.
for eg d4004 2.0 GB (4 Replies)
Discussion started by: tuxian
4 Replies
10. Solaris
Hi,
We have a Solaris 10 machine with update 11 and was configured with IBM storage. It was assigned 2 LUNs (each 70GB) which were striped to make it 140GB. we have taken full backup of entire machine and Our storage team replaced IBM storage with Nimble storage (they did storage-level... (6 Replies)
Discussion started by: prvnrk
6 Replies
LEARN ABOUT DEBIAN
astribank_tool
ASTRIBANK_TOOL(8) ASTRIBANK_TOOL(8)
NAME
astribank_tool - Xorcom Astribank (xpp) control tool
SYNOPSIS
astribank_tool [ options ] [ operation... ] -D device-path
astribank_tool [-h]
DESCRIPTION
astribank_tool is a tool to control the USB-level functionality of an Astribank. The tool operates on a single Astribank at a time (given
as parameter to the -D command line option).
OPTIONS
-D device-path
Required. The device to read from/write to. This is bus_num/device_num, where bus_num and device_num are the first two numbers in
the output of lsusb(8) or dahdi_hardware(8). On older versions of this toolyou needed a complete path to the device, which would be
/dev/bus/usb/bus_num/device_num, or /proc/bus/usb/bus_num/device_num.
-p num
Set the TwinStar port number. Either 0 or 1.
(TODO: explain).
-r type
Reset the Astribank and renumerate its USB connection to power on product ID.
Tyep can be: half or full.
(TODO: explain those).
-w 0|1
Enable (1) or disable (0) the TwinStar watchdog. When enabled, the Astribank will jump to the second port if this system is "not
working" and the system on the second port is available.
-Q
Query astribank properties via MPP protocol.
-n
Renumerate the Astribank product number (e.g: from 1161 to 1162).
-v
Increase verbosity. May be used multiple times.
-d mask
Set debug mask to mask. Default is 0, 0xFF is "everything".
-h
Displays usage message.
SEE ALSO
fxload(8), lsusb(8), astribank_hexload(8)
AUTHOR
This manual page was written by Tzafrir Cohen <tzafrir.cohen@xorcom.com> . Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.
29 March 2009 ASTRIBANK_TOOL(8)