Thanks for you answer. After many tries, I got the messages that states that the kernel is already installed, as well as the kernel image.
So far, I saw that /boot/vmlinuz and /boot/initrd are ok.
After another searches I found that the real problem is that GRUB (2) is vanished the config files, at least the LM10 records.
It has only the /memtest options and /windows boot record.
Trying again to many forums, I did not managed even with Super Grub Disk to deal, because, it seems that on the LM10 installin, I choosen (poorly) to have a ext2 fs, than ext4.
Trying another steps, I found on the SourceForge the bootscript for debugging such situations, and here are the output.
I hope to be clear for the experts to see what is my issue and the solution: in fact, I have no records in Grub/2 menu to point to /dev/sda7 LM10 installation.
Please pay some attention and give me some advice for this.
Thanks all for help.
Boot script attached. Inserting inline, on this reply, is loosing the formatting.
Hi all,
I would like to have some details on menu.lst!!
the reason is ,if i am trying to add my own boot option where do i need to add it?
is it in menu.lst only or elsewere(am referring to unix os)
because i tried adding a unique boot option and it was not reflected when the system booted?... (8 Replies)
I've never really explored the options available in the boot firmware on our servers. Outside of needing to change boot device paths a few times for various reasons, I'm wondering what the implications are of turning off FASTBOOT. According to the man page for 'setboot', it seems that when... (1 Reply)
I was wondering if there was a way to boot from openboot from the dvd drive. I was thinking about imaging the dvd to a blank drive and going about it that way. I just need to do a flash install. (5 Replies)
Hello,
I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error
" reboot and select proper Boot device or insert Boot media in select Boot device and press a key "
I have tried CD and... (0 Replies)
I compiled new kernel in linux 10.04 called linux-2.6.26.8-xenomai, it runs alongside the other kernel, but when I want to boot it I get an error message saying:
Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda5 does not exist.
After making the modules and headers
I made the... (4 Replies)
Slackware 14.0
Hi:
I once changed the smp kernel running in my system by another one in /boot. What I did was to relink /boot/System.map, /boot/vmlinuz and /boot/config. But I don't remember if I did something else. Would that alone be OK. (4 Replies)
Hi everyone,
I am trying to prevent the ehci_hcd kernel module to load at boot time.
Here's what I've tried so far:
1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here):
2) Blacklisted the module by adding the following string to
3) Tried to blacklist the module... (0 Replies)
Discussion started by: gacanepa
0 Replies
LEARN ABOUT LINUX
installgrub
installgrub(1M)installgrub(1M)NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)