when i use ls command it works normal but when i using additional parameter with ls like ls -l , ls -a... it shows a error followed by the output.
this error came after i edited /etc/profile and /etc/skel/.profile file. i just added enteries into this file to change my prompt view. boot when i saw this error appearing i removed those enteries and rebooted my system . but still this error shows up. but when using simple "ls" command it wont throw error. error comes when using additional parameter with ls.. i am using solaris installed in vmware.
Last edited by radoulov; 06-10-2011 at 09:33 AM..
Reason: Code tags!
I have a TV and a monitor hooked up to my box. Right now the system is displaying all the information on the TV instead of the monitor, obviously I want to switch this, as the TV is very impracticle for everything other than watching movies.
I thought I remembered a command I used to use that... (2 Replies)
Hello All!
Where I work we have C3600's that have a video cards that have both DVI and Regular RBG type monitor ports on them. My question is: is it possible to spread my desktop across two monitors that are plugged into the one card much like you can do with NVIDIA software like NVIEW for... (0 Replies)
Hello. I have an AIX machine at 6100-00.
We had some strange activity since filling up /tmp. One symptom is that who -r displays no output. It doesn't hang just no output is displayed.
We are going to boot the machine, but prior to that I'd like to dig a bit to see what may be causing the... (0 Replies)
hey, I'm trying to create the command that will create a file named user.txt that contains the output of the command cut -d: -f1,5 /etc/passwd, and displays itself afterwards.
I don't know how to bridge cat > user.txt with cut -d: -f1,5 /etc/passwd, or how display it afterwards. Any help would... (2 Replies)
Hi guys,
when I power on my sun netra 240 server,
it displays these error messages:
1. Notice: cpu 0 has 2048/2048 MB of memory disabled.
2. Error : The following devices are disabled dimm1.
Please can anyone be kind enough to explain this for me?
Thanks (2 Replies)
Hello there,
I'm using a read-while loop to preserve the word Failed within a text file. For example, if the word Failed exist twice in a single text file, my STDOUT should re-direct to a new text file and display Failed twice.
My output is attached to this thread. I would like output to... (4 Replies)
Discussion started by: SysAdminRialto
4 Replies
LEARN ABOUT OPENSOLARIS
systemd-volatile-root.service
SYSTEMD-VOLATILE-ROOT.SERVICE(8) systemd-volatile-root.service SYSTEMD-VOLATILE-ROOT.SERVICE(8)NAME
systemd-volatile-root.service, systemd-volatile-root - Make the root file system volatile
SYNOPSIS
systemd-volatile-root.service
/lib/systemd/systemd-volatile-root
DESCRIPTION
systemd-volatile-root.service is a service that replaces the root directory with a volatile memory file system ("tmpfs"), mounting the
original (non-volatile) /usr inside it read-only. This way, vendor data from /usr is available as usual, but all configuration data in
/etc, all state data in /var and all other resources stored directly under the root directory are reset on boot and lost at shutdown,
enabling fully stateless systems.
This service is only enabled if full volatile mode is selected, for example by specifying "systemd.volatile=yes" on the kernel command
line. This service runs only in the initial RAM disk ("initrd"), before the system transitions to the host's root directory. Note that this
service is not used if "systemd.volatile=state" is used, as in that mode the root directory is non-volatile.
SEE ALSO systemd(1), systemd-fstab-generator(8), kernel-command-line(7)systemd 237SYSTEMD-VOLATILE-ROOT.SERVICE(8)