I have a distant history with Dos based systems so I'm not overwhelmed, but my Unix experience is entirely limited to hacking my Tivo.
So I'm kindly requesting a pointer in the right direction specifically asking which Linux would best suit my needs...
What I want to do
I wish to use an old... (13 Replies)
I've just replaced the secondary disk drive (was 4 Gb) with a Seagate Barracuda 7200 200 Gb. However the OS seems to think this is only 500 Mb and a spin speed of 5400, although it correct recognises the drive as Seagate ST3200822A.
I take it that it still thinks the old drive is attached. How... (5 Replies)
hi everyone, im new here and am in desperate need of help. I want to convert my 32 bit unix time stamp ' 45d732f6' into a readable format (Sat, 17 February 2007 16:53:10 UTC) using c++.
I have looked around the interent but i just cant make sense of anything. All examples i can find just... (3 Replies)
Hi there,
Here I have an old HP LC3 server from a client of ours.
The server was running in Raid1 Mirror mode.
Yesterday the server didn't boot anymore and now
I have concluded that 1 drive is damaged.
I pulled it out so it can boot from the "good" one.
Unfortuanally this didn't work.
I... (3 Replies)
Dear Experts,
I need your help to convert a unix date and time format number in to readable format like dd/mm/yyyy .
I have a text file of more than 10,000 records and it is like
NAME DATE1 COUNTRY DATE2
ABD 1223580395699 USA 1223580395699... (3 Replies)
How would I convert a unix timestamp such as "1232144092" to a readable date such as "1/16/2009 10:14:28 PM" ?
I thought I could use date, but I don't think so now.. Any help would be great!! (4 Replies)
Hi Folks,
I am facing an issue with the performance.
P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes
P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and... (7 Replies)
I just installed Solaris 11.2 - and it is a bugger. How do I mount an extra HDD that is now formated to NTFS through gparted
it keeps telling me I don't have any ntfs on this laptop. it has two hdds, /dev/sda1 /dev/sdb1 (Linux lingo) Solaris is installed on primary hard drive back of it. then... (2 Replies)
Hello I have a file : file1.txt with the below contents :
237176 test1 test2 1442149024
237138 test3 test4 1442121300
237171 test5 test7 1442112823
237145 test9 test10 1442109600
In the above file fourth field represents the timestamp in Unix format.
I found a command which converts... (6 Replies)
Discussion started by: rahul2662
6 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)