After which I created the mount points /scratch1 /scratch2 and /scratch3. I then created the file system with makefs command.
---------- Post updated at 12:01 PM ---------- Previous update was at 11:54 AM ----------
Here are the outputs...
Code:
(root):/home2/root# lvdisplay -v /dev/vg00/lvol5
--- Logical volumes ---
LV Name /dev/vg00/lvol5
VG Name /dev/vg00
LV Permission read/write
LV Status available/syncd
Mirror copies 1
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 8192
Current LE 256
Allocated PE 512
Stripes 0
Stripe Size (Kbytes) 0
Bad block on
Allocation strict
IO Timeout (Seconds) default
--- Distribution of logical volume ---
PV Name LE on PV PE on PV
/dev/disk/disk9_p2 256 256
/dev/disk/disk5_p2 256 256
--- Logical extents ---
Code:
(root):/home2/root# lvdisplay -v /dev/vg00/lvol8
--- Logical volumes ---
LV Name /dev/vg00/lvol8
VG Name /dev/vg00
LV Permission read/write
LV Status available/syncd
Mirror copies 0
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 544
Current LE 17
Allocated PE 17
Stripes 0
Stripe Size (Kbytes) 0
Bad block on
Allocation strict
IO Timeout (Seconds) default
--- Distribution of logical volume ---
PV Name LE on PV PE on PV
/dev/disk/disk9_p2 17 17
--- Logical extents ---
Code:
(root):/home2/root# lvdisplay -v /dev/vg00/lvol9
--- Logical volumes ---
LV Name /dev/vg00/lvol9
VG Name /dev/vg00
LV Permission read/write
LV Status available/syncd
Mirror copies 0
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 1536
Current LE 48
Allocated PE 48
Stripes 0
Stripe Size (Kbytes) 0
Bad block on
Allocation strict
IO Timeout (Seconds) default
--- Distribution of logical volume ---
PV Name LE on PV PE on PV
/dev/disk/disk9_p2 48 48
--- Logical extents ---
Code:
(root):/home2/root# lvdisplay -v /dev/vg00/lvol10
--- Logical volumes ---
LV Name /dev/vg00/lvol10
VG Name /dev/vg00
LV Permission read/write
LV Status available/syncd
Mirror copies 0
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 2080
Current LE 65
Allocated PE 65
Stripes 0
Stripe Size (Kbytes) 0
Bad block on
Allocation strict
IO Timeout (Seconds) default
--- Distribution of logical volume ---
PV Name LE on PV PE on PV
/dev/disk/disk9_p2 65 65
--- Logical extents ---
Having first encountered LVM in HP-UX and now experimenting with it in Redhat and Gentoo, I am wondering, when is it actually good practice to use LVM? Obviously LVM doesn't work for boot partitions, so that question is a pretty easy answer: Not for /boot in Linux.
While trying to figure out... (1 Reply)
Hi All,
I created an lvm filesystem with a name with dash in the middle, like xxx-yyy (note, that it's only one dash).
I was able to create it smoothly with this instructions.
lvcreate -L 1G uservg -n xxx-yyy
ls /dev/uservg/xxx-yyy (check)
mkfs.ext3 /dev/uservg/xxx-yyy
mount... (1 Reply)
Hi,
I'm new to HP-UX.
I have LVM on /var with 92Gig. I would like to reduce it to create another LVM for Oracle client with 800 meg or so. How to do it. I'm running 11.iv3
Thanks (4 Replies)
i have os 5.1 and i do mirror with hdisk0 and hdisk1 on rootvg
at the end i get error in mail that:
At least one partition mirror is broken please call sysadmin
hd5 boot 1 2 2 closed/stale N/A
the other fs seems ok and sync
what to do about the hd5??? (4 Replies)
Hi
How do you configure LVM to linux? How to create logic volume using LVM?
On a new VM system, just install RHEL 5.8 gave 200 gig for / and 10 gig for swap.
Now I want to configure LVM? is that too late, do I need to delete and start all over again ? (1 Reply)
Hi
I am getting the following error while executing any command related to LVM -
# vgs
vgs: symbol lookup error: vgs: undefined symbol: pvcreate
Can any one please advise how to get rid of this problem?
Thanks (6 Replies)
Hello,
I need some help, it is slightly urgent so any help is appreciated.
We were doing a data migration, during a migratepv command, our SAN ran out of quota space and locked all of the filesystems, now I'm left with a few errors and am not able to do migratepv again.
/:migratepv... (2 Replies)