Sponsored Content
Operating Systems Solaris Solaris 8: Multiple primary interfaces connected to the same network Post 302528623 by aeg on Tuesday 7th of June 2011 02:09:02 PM
Old 06-07-2011
Quote:
Originally Posted by DGPickett
Disappearing when not used is an arp cache feature, in case you are changing NICs on an host. I think 5 minutes is pretty usual, esp for Windows. This makes things tricky/slow if you design a failover that puts a new MAC on an IP.
Ok, that makes sense, so maybe that is only happening since the traffic is only going out of e1000g0. Thanks for that. So now I need to figure out how to make the traffic from each NIC go out of it directly.


Quote:
If you pull the cable on the first NIC, does it move over gracefully?
I am not physically where the machine is so I simulated this by shutting down the switch port to which e1000g0 is connected and the machine loses connection to the internet. I am unable to then receive any ping response from any of the other interfaces, although doing a packet capture on the other interfaces I can see the "ping request" come in. The same applies to when I try to ping out of any specific interface, it fails as I'm suspecting the pings try to get out of e1000g0 but it's shutdown.


Quote:
If you provide saturating load, does it ever use the other NICs?
I don't know how to simulate that Smilie
 

10 More Discussions You Might Find Interesting

1. IP Networking

Network interfaces problem

Hi, I have problems with my SCO unix network interfaces. Intel integrated adapter was failing, so I installed new one - 3COM adapter into free PCI slot. Installed driver using SCO Software manager - successfully Added new Network adapter using SCO Network configuration manager - successfully... (0 Replies)
Discussion started by: vilius
0 Replies

2. SCO

Network interfaces problem

Hi, I have problems with my SCO unix network interfaces. Intel integrated adapter was failing, so I installed new one - 3COM adapter into free PCI slot. Installed driver using SCO Software manager - successfully Added new Network adapter using SCO Network configuration manager - successfully... (0 Replies)
Discussion started by: vilius
0 Replies

3. UNIX for Dummies Questions & Answers

How to display the primary network interface...

How do I find out what the primary network interface is on an AIX system.. Found commands to display information on the various interfaces but nothing that guides me to how to tell which one is the primary network interface. Thanks, ~D (1 Reply)
Discussion started by: djlerman
1 Replies

4. AIX

NIM w/ two network interfaces

Hi all, this is my first post on this forum. My main problem is this: I have a NIM server that I am trying to configure two interfaces on. One interface is for an internal Admin VLAN, the other is so that the server can use SUMA to pull updates. The problem is that I need help w/ the routing.... (0 Replies)
Discussion started by: snakernetb
0 Replies

5. AIX

NIM w/ two network interfaces

Hi all, this is my first post on this forum. My main problem is this: I have a NIM server that I am trying to configure two interfaces on. One interface is for an internal Admin VLAN, the other is so that the server can use SUMA to pull updates. The problem is that I need help w/ the routing.... (1 Reply)
Discussion started by: snakernetb
1 Replies

6. Shell Programming and Scripting

Shell script using ssh remains connected at primary site

Hi All, OS:AIX 5.3 L My shell script using ssh remains connected at primary site and ssh doesn't get disconnected.What should be typed and where in the shell script below to do it. Shell script ======== #!/usr/bin/ksh v_standby=`sqlplus -s /nolog <<END @standby.sql END` echo... (5 Replies)
Discussion started by: a1_win
5 Replies

7. Solaris

Network Interfaces

I got second IOU in my M5000 but not able bring internal network interfcae .. ike i don't get link on those 2 interfaces .. and the same network cable plugged in PCI network card it works like a charm Is there any special way to enable the internal IOU interfaces or i have bad nics ? (8 Replies)
Discussion started by: fugitive
8 Replies

8. Debian

/etc/network/interfaces problem

Hello i am configuring a debian lenny sever ,/etc/network/interfaces is modified so that eth1 takes a static IP address then i save it wq! then i restart the networking , /etc/init.d/networking restart . but after reboot ,the file is reset ,note that the interfaces had by defauklt IPv6 address... (5 Replies)
Discussion started by: learn82
5 Replies

9. UNIX for Dummies Questions & Answers

/etc/network/interfaces

i need a one liner command that writes in /var/log/net.log the date when i connect to the network and when i disconect ..i know that i need to write somethin in /etc/network/interfaces but idk what ! please help (1 Reply)
Discussion started by: g0dlik3
1 Replies

10. AIX

Problem with multiple network interfaces

Hi .. we have two AIX 5.3 systems with a small client server app communicating over a TCP socket. Box A has a single network interface where the server app (in Java) opens a well known port and waits for connections from Box B. Box B has two network interfaces, X and Y. Interface X has the... (4 Replies)
Discussion started by: RonBowater
4 Replies
TPM QUOTE 
TOOLS(8) TPM QUOTE TOOLS(8) NAME
TPM Quote Tools PROGRAMS
tpm_mkuuid, tpm_mkaik, tpm_loadkey, tpm_unloadkey, tpm_getpcrhash, tpm_updatepcrhash, tpm_getquote, tpm_verifyquote DESCRIPTION
TPM Quote Tools is a collection of programs that provide support for TPM based attestation using the TPM quote operation. A TPM contains a set of Platform Configuration Registers (PCRs). In a well configured machine, some of these registers are set to known values during the boot up process or at other times. For example, a PCR might contain the hash of a boot loader in memory before it is run. The TPM quote operation is used to authoritatively verify the contents of a TPM's Platform Configuration Registers (PCRs). During provi- sioning, a composite hash of a selected set of PCRs is computed. The TPM quote operation produces a composite hash that can be compared with the one computed while provisioning. To use the TPM quote operation, keys must be generated. During provisioning, an Attestation Identity Key (AIK) is generated for each TPM, and the public part of the key is made available to entities that validate quotes. The TPM quote operation returns signed data and a signature. The data that is signed contains the PCRs selected for the operation, the composite hash for the selected PCRs, and a nonce provided as input, and used to prevent replay attacks. At provisioning time, the data that is signed is stored, not just the composite hash. The signature is discarded. An entity that wishes to evaluate a machine generates a nonce, and sends it along with the set of PCR used to generate the composite PCR hash at provisioning time. For this use of the TPM quote operation, the signed data is ignored, and the signature returned is used to val- idate the state of the TPM's PCRs. Given the signature, the evaluating entity replaces the nonce in the signed data generated at provi- sioning time, and checks to see if the signature is valid for the data. If so, this check ensures the selected PCRs contain values that match the ones measured during provisioning. A typical scenario for an enterprise using these tools follows. The tools expect AIKs to be referenced via one enterprise-wide Universally Unique Identifier (UUID). The program tpm_mkuuid creates one. For each machine being checked, an AIK is created using tpm_mkaik. The key blob produced is bound to the UUID on its machine using tpm_loadkey. The public key associated with the AIK is sent to the entities that verify quotes. Finally, the expected PCR composite hash is obtained using tpm_getpcrhash. When the expected PCR values change, a new hash can be generated with tpm_updatepcrhash. The program to obtain a quote, and thus measure the current state of the PCRs is tpm_getquote. The program that verifies the quote describes the same PCR composite hash as was measured initially is tpm_verifyquote. SEE ALSO
tpm_mkuuid(8), tpm_mkaik(8), tpm_loadkey(8), tpm_unloadkey(8), tpm_getpcrhash(8), tpm_updatepcrhash(8), tpm_getquote(8), tpm_verifyquote(8) Oct 2010 TPM QUOTE TOOLS(8)
All times are GMT -4. The time now is 03:48 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy