06-06-2011
Quote:
There is no error generated that I can find. When I submit a print job the queue simply goes down. It seems like I had this working at one time but my notes are a bit sketchy. As for using a 14 year old OS....yes we really do and yes it is a production system. Not my choosing but the pay is the same.
Regarding the OS version: i suppose you can't upgrade that much because your hardware might not be supported after 5.1 (if you have a really old R/6000 system, that is). Still you might consider upgrading to 4.3.3 ML11(12? 10? can't remember which was the last one), which was a lot more reliable than 4.2.1 and most likely your software will run with that too.
Regarding your printer problem: have you had a look at "/var/spool/qdaemon" and the files there? This is where the printing subsystem stores its files.
I hope this helps.
bakunin
10 More Discussions You Might Find Interesting
1. AIX
Hi all,
I have an interesting problem. Using remote queues to print using jetdirect printers I am unable to get a printer to print multiple copies of a print job.
command being used:
lpr -P -#3 ./test
(one copy prints)
Also tried:
enq -P -C3 ./test
(same results)
Any ideas?
... (6 Replies)
Discussion started by: Luck
6 Replies
2. Linux
Hello,
I am using version:
cups-config --version - 1.2.4
However, when i use the -o land or -o landscape command it doesn't print in Landscape.
I have the same problem on another server. (Both running CENTOS).
Does landscape printing work in CUPS? Is there a fix?
Thanks in an... (0 Replies)
Discussion started by: stuaz
0 Replies
3. AIX
Hello,
I am trying to setup remote printing from a Linux machine (Red Hat 5.3) to an AIX machine (AIX 5.3). Remote printing for "normal" print jobs is working out OK, but I'm having trouble with some AIX printers that have a user defined backend.
I turned on logging for lpd on the AIX... (0 Replies)
Discussion started by: sbaker
0 Replies
4. Red Hat
Hello,
I also posted this on the AIX forum in hopes of getting help.
I am trying to setup remote printing from a Linux machine (Red Hat 5.3) to an AIX machine (AIX 5.3). Remote printing for "normal" print jobs is working out OK, but I'm having trouble with some AIX printers that have a user... (0 Replies)
Discussion started by: sbaker
0 Replies
5. SCO
Hi, i'm running Openserver 5.0.7 as a CUPS client for a Linux server. The root user can issue a "lpstat -t" to see the printers and can submit jobs without issues.
The problem presents when I try to work as a regular user. If I issue an "lpstat -t" all I get after a few seconds is "lpstat:... (1 Reply)
Discussion started by: cyruspy
1 Replies
6. UNIX for Dummies Questions & Answers
Hi,
We have a Unix 3.2v5.0.5.
I installed a printer via scoadmin, HP network printer manager with network peripheral name (hostname and ipadres are in /etc/hosts).
This is the configuration file :
Code:
root@sco1 # cat configurationBanner: on:AlwaysContent types: simpleDevice:... (0 Replies)
Discussion started by: haezeban
0 Replies
7. UNIX for Advanced & Expert Users
Hi Guys,
I've inherited a mess of an infrastructure in my new job, there hasn't been a sys admin in post for about a year, so things are falling apart. The first thing to break after I started was the printer server. I have it working again, and people can print, however it's very slow, slower... (0 Replies)
Discussion started by: rudigarude
0 Replies
8. Red Hat
Hi All,
Having searched for a solution to this issue i found no suggestions which help my particular problem.
I am getting the following error message on 1 of the 3 printers i have configured:
recoverable: Network host 'xxx.xxx.xxx.xxx' is busy; will retry in 30 seconds
All 3 printers are... (0 Replies)
Discussion started by: Tommyk
0 Replies
9. UNIX for Advanced & Expert Users
Hello Experts,
I have been facing an issue with printing through cups configured on Linux server.
All was going on well but all of a sudden the printers started giving an error message, "Unsupported format application/postscript!" and we cant get any prints of any printer.
Need your help as... (2 Replies)
Discussion started by: Rockyc3400
2 Replies
10. UNIX for Advanced & Expert Users
Hi everyone,
Our office has a lot of printers (label & laser), and sometimes it gets quite hard to configure a new printer in CUPS as most printer manufactures does not provide drivers/ppd for CUPS/LINUX/UNIX.
So we are trying to move to a Windows Print Server and run a Proof of concept. We... (2 Replies)
Discussion started by: Syed Hussaini
2 Replies
enable(1) User Commands enable(1)
NAME
enable, disable - enable/disable LP printers
SYNOPSIS
/usr/bin/enable printer...
/usr/bin/disable [-c | -W] [ -r [reason]] printer...
DESCRIPTION
The enable command activates printers, enabling them to print requests submitted by the lp command. enable must be run on the printer
server.
The disable command deactivates printers, disabling them from printing requests submitted by the lp command. By default, any requests that
are currently printing on printer will be reprinted in their entirety either on printer or another member of the same class of printers.
The disable command must be run on the print server.
Use lpstat -p to check the status of printers.
enable and disable only effect queueing on the print server's spooling system. Executing these commands from a client system will have no
effect on the server.
OPTIONS
The following options are supported for use with disable:
-c Cancels any requests that are currently printing on printer. This option cannot be used with the -W option. If the printer
is remote, the -c option will be silently ignored.
-W Waits until the request currently being printed is finished before disabling printer. This option cannot be used with the
-c option. If the printer is remote, the -W option will be silently ignored.
-r [reason] Assigns a reason for the disabling of the printer(s). This reason applies to all printers specified. This reason is
reported by lpstat -p. Enclose reason in quotes if it contains blanks. The default reason is "unknown reason" for the
existing printer, and "new printer" for a printer added to the system but not yet enabled.
OPERANDS
The following operand is supported for both enable and disable:
printer The name of the printer to be enabled or disabled. Specify printer using atomic name. See printers.conf(4) for information
regarding the naming conventions for atomic names.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
non-zero An error occurred.
FILES
/var/spool/lp/* LP print queue.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpcu |
+-----------------------------+-----------------------------+
|CSI |enabled |
+-----------------------------+-----------------------------+
SEE ALSO
lp(1), lpstat(1), printers.conf(4), attributes(5)
SunOS 5.10 9 Sep 1996 enable(1)