06-01-2011
I don't know if raidctl will work on the T3-1. If Sun's documentation tells you to download 3rd party software if you want to manage hardware RAID from the OS, then I doubt raidctl is supported.
It seems someone else also tried raidctl and it didn't work:
Sparc T3-1 questions
9 More Discussions You Might Find Interesting
1. Solaris
I don't understood why on SPARC-Platforms have not present RAID-Controller ? Sorry for my bad english, but it's crazy always setup software RAID !!! I whanna Hardware RAID and when i can find solution ? (7 Replies)
Discussion started by: jess_t03
7 Replies
2. Solaris
Hi,
I have t5120 sparc and I have 2 146 G drives in the system. I will be installing solaris 10 and also want the system mirrored using Hardware RAID "1"
The System did come preinstalled as it comes from sun. I did not do much on it.
I booted system using boot cdrom -s
gave format... (6 Replies)
Discussion started by: upengan78
6 Replies
3. Solaris
Hi everyone
I've just purchased a Sun T5120 server with 2 internal disks. I've configured hardware RAID (mirror) and as a result the device tree in Solaris only contains 1 hard drive.
My question is, how would I know when one of the drives become faulty?
Thanks (2 Replies)
Discussion started by: soliberus
2 Replies
4. UNIX for Dummies Questions & Answers
Hi
Can someone tell me what are the differences between software and hardware raid ?
thx for help. (2 Replies)
Discussion started by: presul
2 Replies
5. Solaris
Hi,
I have a question. Do LiveUpgrade supports hardware raid?
How to choose the configuration of the system disk for Solaris 10 SPARC?
1st Hardware RAID-1 and UFS
2nd Hardware RAID-1 and ZFS
3rd SVM - UFS and RAID1
4th Software RAID-1 and ZFS
I care about this in the future to take... (1 Reply)
Discussion started by: bieszczaders
1 Replies
6. Hardware
Hi All
I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command.
Following is the hardware RAID output.
root@oracledatabaseserver / $ raidctl
RAID Volume RAID RAID Disk... (0 Replies)
Discussion started by: Tirmazi
0 Replies
7. Solaris
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Discussion started by: KhawHL
4 Replies
8. Solaris
We have hardware RAID configured on Sun-Blade-T6320 and one of the disk got failed. Hence we replaced the failed disk. But the hot swapped disk not recognized by RAID. Kindly help on fixing this issue.
We have 2 LDOM configured on this server and this server running on single disk.
#... (8 Replies)
Discussion started by: rock123
8 Replies
9. Solaris
Dear All ,
we have hardware raid 1 implemented on Solaris Disks.
We need to patch the Servers. Kindly let me know how to patch hardware raid implemented Servers.
Thanks...
Rj (7 Replies)
Discussion started by: jegaraman
7 Replies
LEARN ABOUT LINUX
dpkg-preconfigure
DPKG-PRECONFIGURE(8) Debconf DPKG-PRECONFIGURE(8)
NAME
dpkg-preconfigure - let packages ask questions prior to their installation
SYNOPSIS
dpkg-preconfigure [options] package.deb
dpkg-preconfigure --apt
DESCRIPTION
dpkg-preconfigure lets packages ask questions before they are installed. It operates on a set of debian packages, and all packages that
use debconf will have their config script run so they can examine the system and ask questions.
OPTIONS
-ftype, --frontend=type
Select the frontend to use.
-pvalue, --priority=value
Set the lowest priority of questions you are interested in. Any questions with a priority below the selected priority will be ignored
and their default answers will be used.
--terse
Enables terse output mode. This affects only some frontends.
--apt
Run in apt mode. It will expect to read a set of package filenames from stdin, rather than getting them as parameters. Typically this
is used to make apt run dpkg-preconfigure on all packages before they are installed. To do this, add something like this to
/etc/apt/apt.conf:
// Pre-configure all packages before
// they are installed.
DPkg::Pre-Install-Pkgs {
"dpkg-preconfigure --apt --priority=low";
};
-h, --help
Display usage help.
SEE ALSO
debconf(7)
AUTHOR
Joey Hess <joeyh@debian.org>
2011-06-22 DPKG-PRECONFIGURE(8)