i want to redirect output of one command as the command line argument of another script
for example, say i would run this command:
find . -xdev -type f -size +4096 -exec ls -al {} \;
i wan to be able to do something like:
echo +4096 | find . -xdev -type f -size ****** -exec... (3 Replies)
Hi ,
I would like to assign command (with pipe) output to a variable. The code is as follows. The goal of the code is to get the last folder folder with a particular name pattern.
myDate=`ls | grep 2009 | tail -1`
echo "myDate=" $myDate
However, in the presence of the pipe, the code... (3 Replies)
I can use pipe output to a file. For example
./somescript.sh > output.txt
But for example if the output from ./somescript.sh is slow. like if it prints one line every minute then output.txt is not updated every minute. Lines are written to output.txt in one go, hence have to wait for the whole... (2 Replies)
Hi All,
i have the following command
df|awk '{print $5}'|grep /| egrep -v '^/$|/usr|/opt|/var/log|/home|/tmp'
output looks like:
/filesystem/number1
/filesystem/number2
/filesystem3
/possiblymoreoutput
i want the output to look like the below (either in a file or to output to... (3 Replies)
xargs work great when a command gives multiple line output which can be input to another. In my case it is not working coz the second command uses two words in it.
$ scr.sh
gives output like
193740
638102
375449
..
..
another command takes these number as inputs. it works great... (1 Reply)
Sed command to replace a line in a file using line number from the output of a pipe.
Is it possible to replace a whole line piped from someother command into a file at paritcular line...
here is some basic execution flow..
the line number is 412
lineNo=412
Now i have a line... (1 Reply)
Hi Team,
Need a help on how to pipe a command out put to a shell script. My shell script looks like below.
cat shell_script
#!/usr/bin/ksh
input =$@
echo " we are inside the shell script"
echo " here are the input parameters"
..........................
..................
... (11 Replies)
Hi,
I am using below code snippet to echo/display the files found
(matching a pattern from searchstring.out file) and the corresponding owner.
while read j
do
echo "Pattern to search is:- $j"
find / -name "*$j*" |\
while read k
do
echo "File found is:- $k"
owner=$(ls... (9 Replies)
Since output of w command have variable number of columns I want to get the output in pipe delimited format. I tried
export OFS="|"; w
but that does not work.
Any ideas? (4 Replies)
Discussion started by: Soham
4 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)