05-25-2011
Identify SAN disks
Hello everybody,
I'm using the binary inqraid (Linux RHEL) in order to retrieve information about SAN disks. The questions are:
Given an LDEV, how do I know if the SAN disk related to this LDEV is being used by the OS? I mean, how can I demonstrate to "Storage department" that all disks of the cabine are not being used? And how I identify the cabine of the SAN disk?
Thank you.
9 More Discussions You Might Find Interesting
1. Linux
Hi
I have a linux box attched to a SAN storage from EMC with RAID 5 .I understand that it has 3g cache howver a 20gb file creation takes too much time here are my results any ideas why
time dd if=/dev/zero of=disk.img bs=1048576 count=20000
20000+0 records in
20000+0 records out
997.59s... (2 Replies)
Discussion started by: xiamin
2 Replies
2. Solaris
Hi, I'm having a problem when attempting to define the OCR location for my 10g RAC setup on Solaris 10. I get the following error:
The specified shared raw partition /dev/did/rdsk/d1s0 may not have the correct permission. Verify that the partition is owned by Oracle user.
As per the Oracle10g... (15 Replies)
Discussion started by: michael.chow
15 Replies
3. AIX
This may sound like an absolute rookie question, and it is.
I have been working on Migrating our HP and Solaris servers to the new EMC SAN and know the routines backwards.
Now we've suddenly got a new IBM server and I don't even know how to check if it is connected to the switch.
Can someone... (1 Reply)
Discussion started by: ronellevan
1 Replies
4. Solaris
Good morning to one and all :-) Thank god its Friday, as its bee na rubbish week for me !
So, a quick question. Disks ! Ive got a few local disks, and a few SAN disks used on my solaris server. Whats confusing me, and Im not sure if there's an issue at the SAN end, or my end, regarding the... (3 Replies)
Discussion started by: sbk1972
3 Replies
5. Filesystems, Disks and Memory
Hi,
I'm new to SAN storage so I was wondering if someone can assist me with a problem. I have a solaris 10 OS with 3 SAN devices attached. We are trying to troubleshoot performance so I was asked to get the WWN of each SAN disk and show what it's attached to via the SVM mount in the metastat... (1 Reply)
Discussion started by: rkruck
1 Replies
6. HP-UX
Hello All,
Am trynig to identify if the local HD's on our BL860 (running 11v3) are indeed mirrored to each other.
Cheers,
Cameron (3 Replies)
Discussion started by: Cameron
3 Replies
7. Red Hat
Hello,
How can I identify SAN disks not in use by the OS?
Thank you. (8 Replies)
Discussion started by: asanchez
8 Replies
8. Solaris
How to identify the server is BOOT FROM SAN.
Also how one can find from which device it is booted?
Thanks
Rahul
Double post, continued here (0 Replies)
Discussion started by: rahul.kurumkar
0 Replies
9. Red Hat
Hi, I have many servers all of these are boot from SAN. Can anybody let me know that how to identify the server is Boot fron SAN and from which device?
Thanks
Rahul (1 Reply)
Discussion started by: rahul.kurumkar
1 Replies
LEARN ABOUT OSF1
volreattach
volreattach(8) System Manager's Manual volreattach(8)
NAME
volreattach - Reattaches disk drives that have once again become accessible
SYNOPSIS
/usr/sbin/volreattach [-rb] [accessname...]
/usr/sbin/volreattach -c accessname
OPTIONS
The volreattach utility has the following options: Calls the volrecover utility to attempt to recover stale plexes of any volumes on the
failed disk. Performs the reattach operation in the background. Checks whether a reattach is possible. No operation is performed, but the
name of the disk group and disk media name at which the disk can be reattached is displayed.
DESCRIPTION
The volreattach utility attempts to reattach disks using the same disk group and media names they had before detachment.
This operation may be necessary if a disk has a transient failure, or if some disk drivers are unloaded or unloadable when the Logical
Storage Manager is started, causing disks to enter the failed state.
If the problem is fixed, the volreattach command can be used to reattach the disks without plexes being flagged as stale, as long as the
reattach happens before any volumes on the disk are started.
The volreattach command is called from the voldiskadm menus as part of disk recovery.
The volreattach utility tries to find a disk with a disk group and disk ID matching that of the disk(s) being reattached. If the matching
disk is found, the reattach operation may still fail if the original cause (or some other cause) for the disk failure still exists.
EXIT CODES
A zero exit status is returned if it is possible to perform a reattach. Otherwise, non-zero is returned.
SEE ALSO
volintro(8), voldiskadm(8), volrecover(8)
volreattach(8)