I have a SAN LUN of 550 GB created as an ext3 partition of the entire lun and need to make the lun and partition larger... 600 GB
I have read that once you extend the LUN on the array side you can umount the LUN, run fsck and use the resize2fs on the host side.
Can anyone verifyif this is correct and if there are any potential dangers
in doing this.
hi,
i have a volume on a LUN of an EMC-storage and i need to increase the
size.
i could increase the size of the LUN on the EMC, i could increase the
size of the disk for solaris, but how can i tell the veritas volume
manager that the disk is larger now?
what i've done:
1. LUN on EMC
2.... (3 Replies)
Hello,
I am having trouble with getting Lun visible to the solaris 8 host from the Array SUN T3B.
It's SunFire 280R with Qlogic QLA2340 directly connected via 1 FC path to T3. On the array there is one 500GB volume created and mounted. I have tried with both F/w version of the array 2.1.6 and... (4 Replies)
Hi,
I am working on SunOS perlrate 5.10 Generic_127111-09 sun4v sparc SUNW,SPARC-Enterprise-T5120.
The server has an LSISAS3801E HBA card installed and is connected to a StorageTek 2530 array.
I have made a volume on arrary using Common Array Manager.
I can see the volume on server:
... (2 Replies)
Am trying to differentiate between the local disks and LUN's presented from SAN onto the server. Have Tried fdisk -l, however I quite cudn't differentiate the local disks from SAN presented LUN's.
Can you pls. let me know the procedure and commands to find this.
OS - RHEL 4
SAN - EMC... (3 Replies)
Hi,
I would like to know if there is a command similar to scsimgr in HP-UX that
can help me change the algorithm and reserve_policy attributes of all luns presented to an AIX host.
Otherwise I would have to use,
chdev -l hdiskX -a algorithm=round_robin reserve_policy=no_reserve
in a... (1 Reply)
Hi,
I have an iSCSI LUN attached to an AIX 5.3 box. It's initial size is 250GB, I just grew it on the SAN to 300GB, but AIX is not seeing the change. Right now I have some processes going and it's eating up the disk space. I need to grow this lun by atleast 30GB otherwise the process with bomb... (5 Replies)
I have seen a few threads / posts on the forum's but nothing specific to what Iam after. So Iam hoping you can help.
Issue : Iam hoping to remove unused emc luns from my solaris servers , T2000 (5.10 Generic_142900-02). I have a list of the process I have followed for the removal of the luns.... (3 Replies)
Hi All,
I am new for this blog and this is my first Query on this blog. I would like to dael with graet masters on linux.
Here we go,
After storage people created the LUN, How to add that LUN to Linux server. (Make that LUN visibility on linux server.) ?
How to view the LUN... (5 Replies)
Discussion started by: abhay1983
5 Replies
LEARN ABOUT DEBIAN
ql-dynamic-tgt-lun-disc
ql-dynamic-tgt-disc(8) System Administration ql-dynamic-tgt-disc(8)NAME
ql-dynamic-tgt-lun-disc - Scans for newly added LUNs.
SYNOPSIS
ql-dynamic-tgt-lun-disc [OPTIONS]
DESCRIPTION
Dynamic TGT-LUN Discovery Utility
This utility scans for newly added LUNs. After adding new LUNs, you do not need to unload, then load the QLogic FC driver or reboot the
system
To begin scanning the LUNs issue following command:
# /usr/sbin/ql-dynamic-tgt-lun-disc
-al, --allow-lip
LIP is not issued by default, even if it is required for scanning new LUNs Setting this option, allows the utility to issue LIP.
-cl, --current-luns
Displays LUNS currently present
-e, --extended-scan
Use this option as "-e | --extended-scan". to rescan LUNs. This will identify any change in attributes of existing LUNs. This option
can be used in combination of scan/refresh or max luns
-h, --help, ?
Prints this help message
-i, --interactive
Use this option to use the menu driven program
-is, --iscsi
Use this option to operate on ISCSI HBAs, this option can be used in combination of any other supported option.
-m, --max-lun
To set the maximum LUNs to be scanned
-p, --proc
Use PROC file system for LUN scanning
-r, --refresh
To refresh, that is remove LUNs that are lost use the options "-r|--refresh". This will remove the LUNs which no more exist.
-s, --scan [ -r|--refresh ]
The QLogic LUN scan utility re-scans all the devices connected to the QLogic HBA
SEE ALSO ql-lun-state-online(8), ql-hba-snapshot(8), ql-set-cmd-timeout(8)Matthias Schmitz <matthias@sigxcpu.org> July 2009 ql-dynamic-tgt-disc(8)