I used this on an AIX machine and encountered the following error.
$ ls -l
total 600
-rwxrwxrwx 1 e26936 dba 1491 Feb 07 1992 MANIFEST
-rwxrwxrwx 1 e26936 dba 8148 Apr 05 1992 Makefile
-rwxrwxrwx 1 e26936 dba 4852 Sep 06 2003 README
-rwxrwxrwx... (0 Replies)
Hi everybody,
Is it possible to create a Shared Filesystem on Network to be accessed from 2 Systems?
Both systems are AIX but with different versions. One of these systems is AIX 4.3 & the other is AIX 5.2.
Thanks in advanced (8 Replies)
Hi all,
I would like to ask on how to create 2MB partition on a Compact Flash card. It supposed to be of FAT12 type, and the CF capacity is 4GB. I try to do the partitioning and specify the size as 2MB but the partition editor automatically resize it to 8MB. I know that this is possible and the... (4 Replies)
I'm new to linux and need information on how do I create a filesytem on a dedicated on LUN for RHEL 4 and 5? I want the filesystem to be a ext3
---------- Post updated at 10:00 AM ---------- Previous update was at 08:56 AM ----------
Found the answer. This thread can be closed. (1 Reply)
I created a new filesystem using dd and mounted:
I have a filesystem /FAW with 1Terra space
/dev/sdb1 1151331444 24742604 1068104612 3% /FAW
Steps I followed to create a new filesystem
# dd if=/dev/zero of=/FAW/vms/linux_vm/disk2.img bs=1 count=1024 seek=500G
# mke2fs... (10 Replies)
Hello,
How can I add a logic to awk to tell it to print 0 when encountering a division by zero attempted? Below is the code. Everything in the code works fine except the piece that I want to calculate read/write IO size. I take the kbr / rs and kbw / ws. There are times when the iostat data... (5 Replies)
Hello Team,
In a application filesystem, there is a process keep creating the log files. Due to that the filesystem keep getting full. Please let me know how to identify the process which is keep writing in the filesystem.
fuser -u <FS> will show only the user who using the filesystem.... (3 Replies)
Hi,
The script below works okay and emails me the log in the end once the script completes but what I'm trying to do is to also notify me via an email as soon as the script encounters any error whatsoever.
cat test.list
hdisk0 00a6351a2c832da1 rootvg ... (7 Replies)
Hi,
I have a task of creating a UFS filesystem in an LDOM. It is located in a hypervisor (CDOM).
The storage has been provisioned to the CDOM. How do I make it reflect to the LDOM, and then from there configure/set up the filesystem in the LDOM?
Please help. (1 Reply)
Discussion started by: anaigini45
1 Replies
LEARN ABOUT SUSE
lsdev
LSDEV(8) Linux System Manual LSDEV(8)NAME
lsdev - display information about installed hardware
SYNOPSIS
lsdev
DESCRIPTION
lsdev gathers information about your computer's installed hardware from the interrupts, ioports and dma files in the /proc directory, thus
giving you a quick overview of which hardware uses what I/O addresses and what IRQ and DMA channels.
OPTIONS
None.
FILES
/proc/interrupts
IRQ channels.
/proc/ioports
I/O memory addresses.
/proc/dma
DMA channels.
BUGS
lsdev can't always figure out which lines in the three examined files refer to one and the same device, because these files sometimes use
different names for the same piece of hardware. For example, in some kernels the keyboard is referred to as `kbd' in /proc/ioports and as
`keyboard' in /proc/interrupts. This should be fixed in the kernel, not in lsdev (as has indeed happened for this particular example).
The program does however try to match lines by stripping anything after a space or open parenthesis from the name, so that e.g. the
`serial' lines from /proc/interrupts match the `serial(set)' lines from /proc/ioports. This attempt at DWIM might be considered a bug in
itself.
This program only shows the kernel's idea of what hardware is present, not what's actually physically available.
SEE ALSO procinfo(8).
AUTHOR
Sander van Malssen <svm@kozmix.cistron.nl>
3rd Release 1998-05-31 LSDEV(8)