I used this on an AIX machine and encountered the following error.
$ ls -l
total 600
-rwxrwxrwx 1 e26936 dba 1491 Feb 07 1992 MANIFEST
-rwxrwxrwx 1 e26936 dba 8148 Apr 05 1992 Makefile
-rwxrwxrwx 1 e26936 dba 4852 Sep 06 2003 README
-rwxrwxrwx... (0 Replies)
Hi everybody,
Is it possible to create a Shared Filesystem on Network to be accessed from 2 Systems?
Both systems are AIX but with different versions. One of these systems is AIX 4.3 & the other is AIX 5.2.
Thanks in advanced (8 Replies)
Hi all,
I would like to ask on how to create 2MB partition on a Compact Flash card. It supposed to be of FAT12 type, and the CF capacity is 4GB. I try to do the partitioning and specify the size as 2MB but the partition editor automatically resize it to 8MB. I know that this is possible and the... (4 Replies)
I'm new to linux and need information on how do I create a filesytem on a dedicated on LUN for RHEL 4 and 5? I want the filesystem to be a ext3
---------- Post updated at 10:00 AM ---------- Previous update was at 08:56 AM ----------
Found the answer. This thread can be closed. (1 Reply)
I created a new filesystem using dd and mounted:
I have a filesystem /FAW with 1Terra space
/dev/sdb1 1151331444 24742604 1068104612 3% /FAW
Steps I followed to create a new filesystem
# dd if=/dev/zero of=/FAW/vms/linux_vm/disk2.img bs=1 count=1024 seek=500G
# mke2fs... (10 Replies)
Hello,
How can I add a logic to awk to tell it to print 0 when encountering a division by zero attempted? Below is the code. Everything in the code works fine except the piece that I want to calculate read/write IO size. I take the kbr / rs and kbw / ws. There are times when the iostat data... (5 Replies)
Hello Team,
In a application filesystem, there is a process keep creating the log files. Due to that the filesystem keep getting full. Please let me know how to identify the process which is keep writing in the filesystem.
fuser -u <FS> will show only the user who using the filesystem.... (3 Replies)
Hi,
The script below works okay and emails me the log in the end once the script completes but what I'm trying to do is to also notify me via an email as soon as the script encounters any error whatsoever.
cat test.list
hdisk0 00a6351a2c832da1 rootvg ... (7 Replies)
Hi,
I have a task of creating a UFS filesystem in an LDOM. It is located in a hypervisor (CDOM).
The storage has been provisioned to the CDOM. How do I make it reflect to the LDOM, and then from there configure/set up the filesystem in the LDOM?
Please help. (1 Reply)
Discussion started by: anaigini45
1 Replies
LEARN ABOUT DEBIAN
sdl::gfx::imagefilter
pods::SDL::GFX::ImageFilter(3pm) User Contributed Perl Documentation pods::SDL::GFX::ImageFilter(3pm)NAME
SDL::GFX::ImageFilter - image filtering functions
CATEGORY
TODO, GFX
METHODS
MMX_detect
int gfx_image_MMX_detect() CODE: SDL_imageFilterMMXdetect();
MMX_off
void gfx_image_MMX_off() CODE: SDL_imageFilterMMXoff();
MMX_on
void gfx_image_MMX_on() CODE: SDL_imageFilterMMXon();
add
int gfx_image_add(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterAdd(Src1, Src2, Dest, length); OUTPUT: RETVAL
mean
int gfx_image_mean(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterMean(Src1, Src2, Dest, length); OUTPUT: RETVAL
sub
int gfx_image_sub(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterSub(Src1, Src2, Dest, length); OUTPUT: RETVAL
abs_diff
int gfx_image_abs_diff(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterAbsDiff(Src1, Src2, Dest, length); OUTPUT: RETVAL
mult
int gfx_image_mult(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterMult(Src1, Src2, Dest, length); OUTPUT: RETVAL
mult_nor
int gfx_image_mult_nor(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterMultNor(Src1, Src2, Dest, length); OUTPUT: RETVAL
mult_div_by_2
int gfx_image_mult_div_by_2(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int
length CODE: RETVAL = SDL_imageFilterMultDivby2(Src1, Src2, Dest, length); OUTPUT: RETVAL
mult_div_by_4
int gfx_image_mult_div_by_4(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int
length CODE: RETVAL = SDL_imageFilterMultDivby4(Src1, Src2, Dest, length); OUTPUT: RETVAL
bit_and
int gfx_image_bit_and(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterBitAnd(Src1, Src2, Dest, length); OUTPUT: RETVAL
bit_or
int gfx_image_bit_or(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterBitOr(Src1, Src2, Dest, length); OUTPUT: RETVAL
div
int gfx_image_div(Src1, Src2, Dest, length) unsigned char *Src1 unsigned char *Src2 unsigned char *Dest int length
CODE: RETVAL = SDL_imageFilterDiv(Src1, Src2, Dest, length); OUTPUT: RETVAL
bit_negation
int gfx_image_bit_negation(Src1, Dest, length) unsigned char *Src1 unsigned char *Dest int length CODE:
RETVAL = SDL_imageFilterBitNegation(Src1, Dest, length); OUTPUT: RETVAL
add_byte
int gfx_image_add_byte(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned char C
CODE: RETVAL = SDL_imageFilterAddByte(Src1, Dest, length, C); OUTPUT: RETVAL
add_uint
int gfx_image_add_uint(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned int C
CODE: RETVAL = SDL_imageFilterAddUint(Src1, Dest, length, C); OUTPUT: RETVAL
add_byte_to_half
int gfx_image_add_byte_to_half(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned char
C CODE: RETVAL = SDL_imageFilterAddByteToHalf(Src1, Dest, length, C); OUTPUT: RETVAL
sub_byte
int gfx_image_sub_byte(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned char C
CODE: RETVAL = SDL_imageFilterSubByte(Src1, Dest, length, C); OUTPUT: RETVAL
sub_uint
int gfx_image_sub_uint(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned int C
CODE: RETVAL = SDL_imageFilterSubUint(Src1, Dest, length, C); OUTPUT: RETVAL
shift_right
int gfx_image_shift_right(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N
CODE: RETVAL = SDL_imageFilterShiftRight(Src1, Dest, length, N); OUTPUT: RETVAL
shift_right_uint
int gfx_image_shift_right_uint(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char
N CODE: RETVAL = SDL_imageFilterShiftRightUint(Src1, Dest, length, N); OUTPUT: RETVAL
mult_by_byte
int gfx_image_mult_by_byte(Src1, Dest, length, C) unsigned char *Src1 unsigned char *Dest int length unsigned char C
CODE: RETVAL = SDL_imageFilterMultByByte(Src1, Dest, length, C); OUTPUT: RETVAL
shift_right_and_mult_by_byte
int gfx_image_shift_right_and_mult_by_byte(Src1, Dest, length, N, C) unsigned char *Src1 unsigned char *Dest int length
unsigned char N unsigned char C CODE: RETVAL = SDL_imageFilterShiftRightAndMultByByte(Src1, Dest, length, N, C);
OUTPUT: RETVAL
shift_left_byte
int gfx_image_shift_left_byte(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N
CODE: RETVAL = SDL_imageFilterShiftLeftByte(Src1, Dest, length, N); OUTPUT: RETVAL
shift_left_uint
int gfx_image_shift_left_uint(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N
CODE: RETVAL = SDL_imageFilterShiftLeftUint(Src1, Dest, length, N); OUTPUT: RETVAL
shift_left
int gfx_image_shift_left(Src1, Dest, length, N) unsigned char *Src1 unsigned char *Dest int length unsigned char N
CODE: RETVAL = SDL_imageFilterShiftLeft(Src1, Dest, length, N); OUTPUT: RETVAL
binarize_using_threshold
int gfx_image_binarize_using_threshold(Src1, Dest, length, T) unsigned char *Src1 unsigned char *Dest int length
unsigned char T CODE: RETVAL = SDL_imageFilterBinarizeUsingThreshold(Src1, Dest, length, T); OUTPUT:
RETVAL
clip_to_range
int gfx_image_clip_to_range(Src1, Dest, length, Tmin, Tmax) unsigned char *Src1 unsigned char *Dest int length unsigned
char Tmin unsigned char Tmax CODE: RETVAL = SDL_imageFilterClipToRange(Src1, Dest, length, Tmin, Tmax); OUTPUT:
RETVAL
normalize_linear
int gfx_image_normalize_linear(Src1, Dest, length, Cmin, Cmax, Nmin, Nmax) unsigned char *Src1 unsigned char *Dest int
length int Cmin int Cmax int Nmin int Nmax CODE: RETVAL = SDL_imageFilterNormalizeLinear(Src1, Dest,
length, Cmin, Cmax, Nmin, Nmax); OUTPUT: RETVAL
convolve_kernel_3x3_divide
int gfx_image_convolve_kernel_3x3_divide(Src, Dest, rows, columns, Kernel, Divisor) unsigned char *Src unsigned char *Dest
int rows int columns Sint16 *Kernel unsigned char Divisor CODE: RETVAL =
SDL_imageFilterConvolveKernel3x3Divide(Src, Dest, rows, columns, Kernel, Divisor); OUTPUT: RETVAL
convolve_kernel_5x5_divide
int gfx_image_convolve_kernel_5x5_divide(Src, Dest, rows, columns, Kernel, Divisor) unsigned char *Src unsigned char *Dest
int rows int columns Sint16 *Kernel unsigned char Divisor CODE: RETVAL =
SDL_imageFilterConvolveKernel5x5Divide(Src, Dest, rows, columns, Kernel, Divisor); OUTPUT: RETVAL
convolve_kernel_7x7_divide
int gfx_image_convolve_kernel_7x7_divide(Src, Dest, rows, columns, Kernel, Divisor) unsigned char *Src unsigned char *Dest
int rows int columns Sint16 *Kernel unsigned char Divisor CODE: RETVAL =
SDL_imageFilterConvolveKernel7x7Divide(Src, Dest, rows, columns, Kernel, Divisor); OUTPUT: RETVAL
convolve_kernel_9x9_divide
int gfx_image_convolve_kernel_9x9_divide(Src, Dest, rows, columns, Kernel, Divisor) unsigned char *Src unsigned char *Dest
int rows int columns Sint16 *Kernel unsigned char Divisor CODE: RETVAL =
SDL_imageFilterConvolveKernel9x9Divide(Src, Dest, rows, columns, Kernel, Divisor); OUTPUT: RETVAL
convolve_kernel_3x3_shift_right
int gfx_image_convolve_kernel_3x3_shift_right(Src, Dest, rows, columns, Kernel, NRightShift) unsigned char *Src unsigned char
*Dest int rows int columns Sint16 *Kernel unsigned char NRightShift CODE: RETVAL =
SDL_imageFilterConvolveKernel3x3ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift); OUTPUT: RETVAL
convolve_kernel_5x5_shift_right
int gfx_image_convolve_kernel_5x5_shift_right(Src, Dest, rows, columns, Kernel, NRightShift) unsigned char *Src unsigned char
*Dest int rows int columns Sint16 *Kernel unsigned char NRightShift CODE: RETVAL =
SDL_imageFilterConvolveKernel5x5ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift); OUTPUT: RETVAL
convolve_kernel_7x7_shift_right
int gfx_image_convolve_kernel_7x7_shift_right(Src, Dest, rows, columns, Kernel, NRightShift) unsigned char *Src unsigned char
*Dest int rows int columns Sint16 *Kernel unsigned char NRightShift CODE: RETVAL =
SDL_imageFilterConvolveKernel7x7ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift); OUTPUT: RETVAL
convolve_kernel_9x9_shift_right
int gfx_image_convolve_kernel_9x9_shift_right(Src, Dest, rows, columns, Kernel, NRightShift) unsigned char *Src unsigned char
*Dest int rows int columns Sint16 *Kernel unsigned char NRightShift CODE: RETVAL =
SDL_imageFilterConvolveKernel9x9ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift); OUTPUT: RETVAL
sobel_x
int gfx_image_sobel_x(Src, Dest, rows, columns) unsigned char *Src unsigned char *Dest int rows int columns CODE:
RETVAL = SDL_imageFilterSobelX(Src, Dest, rows, columns); OUTPUT: RETVAL
sobel_x_shift_right
int gfx_image_sobel_x_shift_right(Src, Dest, rows, columns, NRightShift) unsigned char *Src unsigned char *Dest int rows
int columns unsigned char NRightShift CODE: RETVAL = SDL_imageFilterSobelXShiftRight(Src, Dest, rows, columns,
NRightShift); OUTPUT: RETVAL
align_stack
void gfx_image_align_stack() CODE: SDL_imageFilterAlignStack();
restore_stack
void gfx_image_restore_stack() CODE: SDL_imageFilterRestoreStack();
AUTHORS
See "AUTHORS" in SDL.
perl v5.14.2 2012-05-28 pods::SDL::GFX::ImageFilter(3pm)
05-18-2011
