Part of my script
resize on my .profile will actually prevent the exit command to exit telnet:
esize: unknown character, exiting.
It will not close the connection
If I remove resize it works OK.
Any way to overcome this without removing resize ?
I have recently changed software systems for my small business. I was running SCO OpenServer v 5.0 and have now gone to a windows based system using Windows Server 2003. No problems with the changover as the server hardware was changed also. The problem I am having is that I would like to... (2 Replies)
Hello everyone
I need to resize a filesystem /home I want to add 200mb and I have space on the disk with lsvg rootvg command I check this but I cant because has a mirror.
Do you know some way that I can do this.
Thanks in advance (1 Reply)
Dear All
We have HP9000 rp7400 Server running with hp-ux 11i.
Our Disk storage has two volume groups and are allocated as follows:
1. /#vgdisplay -v
--- Volume groups ---
VG Name /dev/vg00
VG Write Access read/write
VG Status available... (1 Reply)
hello every body. in a little bit of a jam here.if you all happen to know how to resize the tmp file in my linux system. I use a sabayon 3.5 on a x86 machine. itried to make a dvd image copy but the system gives me a error message telling me the temporary folder used to make images is too small.... (3 Replies)
i am running redhat on VMware
i increased a disk size from san for existing disk /dev/sdb
how do i resize the disk
# pvdisplay
--- Physical volume ---
PV Name /dev/sdb1
VG Name localvg
PV Size 15.00 GB / not usable 2.99 MB
... (0 Replies)
Dear All,
We have HP Unix 11.31.
We have two VG, VG01 and VG02.
In VG01 there are three mount point each of 100gb size. There is no data on below mount point
/soft/01
/soft/02
/soft/03Is it possible to resize each of these mount point to 50 GB. So 150 GB will free and release from... (2 Replies)
Is there a script or extension that I can look into that will re-size an allotment of images to a given size?? Id like to take images of a certain size and resize them but Im dont remember an install option that can do it if installed in ubuntu but I, also unsure in what code I will have to learn.... (2 Replies)
Good afternoon!
Help with a solution
I have AIX 7.1
works through vios
I expanded Lun
that it is necessary to make that aix saw this change and to expand the section lvm
Sorry for my English (1 Reply)
It is not allowing me to create a new partition...... I know that there are no free sectors available.... I want to RESIZE the partitions which are already created.
Please tell me how to resize the partitions.....Don't tell me that we can resize through parted command....
please tell me all... (2 Replies)
Hi,
I have rpool about 500G. So i want to use 210G from rpool and assign mount point as /database.
I seek in google and couldn't found it. Does anyone know how to achieve it?
Thanks. (2 Replies)
Discussion started by: mzainal
2 Replies
LEARN ABOUT OSF1
sleep
sleep(1) General Commands Manual sleep(1)NAME
sleep - Suspends execution for at least the specified time
SYNOPSIS
sleep seconds
STANDARDS
Interfaces documented on this reference page conform to industry standards as follows:
sleep: XCU5.0
Refer to the standards(5) reference page for more information about industry standards and associated tags.
OPTIONS
None
OPERANDS
Non-negative integer specifying the number of seconds for which execution is to be suspended.
DESCRIPTION
The sleep command suspends execution of a process for at least the interval specified by seconds, which can range from 0 to 2,147,483,647
seconds. Depending on system activity, the actual time of suspension may be longer. See the sleep(3) reference page.
[Tru64 UNIX] seconds can be entered as a non-negative decimal, octal, or hexadecimal value.
NOTES
If sleep receives a SIGALARM signal before process execution has resumed, sleep takes one of the following actions: Terminates normally
with a 0 (zero) exit status. (See the sleep(3) reference page for more information.) Ignores the signal Performs default processing
EXIT STATUS
The following exit values are returned: Execution was successfully suspended for at least the requested time, or a SIGALARM signal was
received. An error occurred.
EXAMPLES
To display a message at 4-minute intervals for 20 minutes, create a shell script called remind containing the following:
for i do sleep 240; echo $i sleep 240; echo $i sleep 240; echo $i sleep 240; echo $i sleep 240; echo $i done
To display the message Try calling NHK at 4-minute intervals, enter: remind 'Try calling NHK' To run a command at regular intervals,
create a shell script containing the following:
while true do
date
sleep 60 done
This displays the date and time once a minute. To execute a command after a specified interval, enter the following; (sleep 3600;
echo Time's up) &
This displays the message "Time's up" after one hour.
ENVIRONMENT VARIABLES
The following environment variables affect the execution of sleep: Provides a default value for the internationalization variables that are
unset or null. If LANG is unset or null, the corresponding value from the default locale is used. If any of the internationalization vari-
ables contain an invalid setting, the utility behaves as if none of the variables had been defined. If set to a non-empty string value,
overrides the values of all the other internationalization variables. Determines the locale for the interpretation of sequences of bytes
of text data as characters (for example, single-byte as opposed to multibyte characters in arguments). Determines the locale for the for-
mat and contents of diagnostic messages written to standard error. Determines the location of message catalogues for the processing of
LC_MESSAGES.
SEE ALSO
Commands: wait(1)
Functions: alarm(3), pause(3), sigaction(2), sleep(3)
Standards: standards(5)sleep(1)