Sponsored Content
Operating Systems HP-UX LV and/or physical drive problems HP9000 Post 302516868 by methyl on Monday 25th of April 2011 11:51:30 AM
Old 04-25-2011
The ioscan posted is incomplete. There is no detail after c0t10d0 (the 10th disc of 14 discs). You may find that one or more discs is shown as "NO_HW" instead of "CLAIMED".
There is no real evidence posted (so far) of a disc failure as such but it is clear that at power-on /etc/lvmtab did not match the physical discs for some reason.
This document may be useful for diagnosing the fault "When good disks go bad":
http://bizsupport2.austin.hp.com/bc/.../c01911837.pdf
Suggest you assemble an inventory of the hardware and LVM configuration along with the expected filesystem mount table and compare with your records. Record any commands you have typed which change things (e.g. "vgscan").
Then post the problem on the HP ITRC (LVM board).
This User Gave Thanks to methyl For This Post:
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

New Drive problems

Sun Ultra 80 ... had to connect an additional drive. connect it according to hardware manual The problem is when i try to power on the system , it dosent start, .. like the system is dead. :( So i remove the new drive and voila ... power starts up . Can anyone pinpoint wats goin on here. ... (7 Replies)
Discussion started by: DPAI
7 Replies

2. Linux

HP DAT Drive C1533A on RH9 Problems

HELP!! I am having some major problems at present with a HP dat drive under RH9. The drive worked fine previously under RH8, but now does not work. I am using kernel 2.4.20-30.9 on a i686 athlon intel box. My messages log shows the below: Apr 23 11:39:24 devsys kernel: ahc_pci:1:6:0:... (0 Replies)
Discussion started by: dkimber6
0 Replies

3. SuSE

SUSE 9 - problems accessing CD ROM drive

I've got SUSE 9 installed on a removable hard drive and the system is up and running fine. I'm trying to copy stuff off a CD onto one of my Linux partitions but I am getting an errors : * Could not read /media/cdrom/file1.tar.tar I can browse to the file location on the CD by using the... (11 Replies)
Discussion started by: GandalfWhite
11 Replies

4. UNIX for Advanced & Expert Users

tar problems using Sony AIT drive

Recently we brought up a Spectralogic 2K Tape Library that had been out of service for about 3 years to replace a DDS-4 tape drive unit as our main backup device. Everything seemed to go fine but now I have run into a little problem. System details: FBSD 6.1 SpectraLogic 2K library with a... (1 Reply)
Discussion started by: thumper
1 Replies

5. Solaris

Tape drive problems

Recently we had a problem with a CPU card on our SunFire V880 which has Solaris 9 OS. we removed the card and there was also a problem with our usr which was accidentally deleted. We able to restore the usr but now we having a problem with our tape drive. Previously we could write to the with ... (5 Replies)
Discussion started by: rahmantanko
5 Replies

6. UNIX for Dummies Questions & Answers

Problems with SCSI card and tape drive

Currenty running SCO Openserver 6 at a Dell PowerEdge T300. I recently installed a driver for an Adaptec SCSI card (adpu320). When I connect a tape drive to it and re-start the system,it freezes and displays the following message: "WARNING: adpu320: Command timed out (ha= 4)" and the system... (2 Replies)
Discussion started by: RicardoM
2 Replies

7. SCO

Problems Detecting HP Tape Drive

I am trying to install an HP StorageWorks DAT40 Tape drive at SC0 5.0.7. The tape drive is not functional. When I run #sconf -v this is what I get; Sdsk ad160 0 0 0 0 Sdsk ad160 0 0 1 0 Stp ad160 0 0 3 0 But when... (2 Replies)
Discussion started by: RicardoM
2 Replies

8. AIX

Maximum Limit of HMC to handle Physical Power Virtualization Physical Machine

Hello All, Can anybody please tell me what is the maximum limit of Physical IBM Power Machine which can be handled by single HMC at a single point of time? Thanks, Jenish (1 Reply)
Discussion started by: jenish_shah
1 Replies

9. Fedora

Need to incrwase PHYSICAL VOLUME space on hard drive with free space on it

Hi, I run Fedora 17. I created a physical volume of 30GB on a disk with 60GB of space so there is 30GB of free space. On the physical volume, I created my volume group and logical volumes. I assigned all the space in the physical volume to my volume group. I need to add the 30GB of free space... (1 Reply)
Discussion started by: mojoman
1 Replies

10. AIX

AIX physical DVD/CD drive

Hello, I have some doubts about the dvd/cd physical on power machine and AIX. I see on my AIX lpar and see there is 1 DVD drive and its physical location bash-4.4# lsdev | grep cd0 cd0 Available 03-00-00 SATA DVD-RAM Drive bash-4.4# lscfg -vpl cd0 cd0 ... (12 Replies)
Discussion started by: Phat
12 Replies
VGSCAN(8)						      System Manager's Manual							 VGSCAN(8)

NAME
vgscan - scan all disks for volume groups and build /etc/lvmtab and /etc/lvmtab.d/* which are the database for all other lvm commands. SYNOPSIS
vgscan [-d|--debug] [-f|--forcenumbers] [-h|--help] [-r|--remove_snapshots [VolumeGroupName]] [-v|--verbose] DESCRIPTION
vgscan scans all SCSI, (E)IDE disks, multiple devices and a bunch of other disk devives in the system for volume groups defined. OPTIONS -d, --debug Enables additional debugging output (if compiled with DEBUG). -f, --forcenumbers If used volume group and/or logical volume minor numbers are found during scan, replace them. This will potentially cause problems for NFS exported filesystems on logical volumes with changed numbers. -h, --help Print a usage message on standard output and exit successfully. -r, --remove_snapshots [VolumeGroupName] Remove all snapshot logical volumes from all or just the named volume group. -v, --verbose Display verbose information of vgscan's activities. Hint Put vgscan in one of your system startup scripts. This gives you an actual logical volume manager database before activating all volume groups by doing a "vgchange -ay". DIAGNOSTICS
vgscan returns an exit code of 0 for success and > 0 for error: 1 error reading physical volumes 2 error inserting vokume group name into lvmtab 3 no volume group(s) found 4 error creating lvmtab 5 no or not enough free device specials to store volume group in lvmtab 6 error storing VGDA on disk(s) 7 reused LV device number 8 error releasing snapshot logical volume 95 driver/module not in kernel 96 invalid I/O protocol version 97 error locking logical volume manager 99 invalid command line See also lvm(8), vgcreate(8), vgchange(8) AUTHOR
Heinz Mauelshagen <Linux-LVM@Sistina.com> Heinz Mauelshagen LVM TOOLS VGSCAN(8)
All times are GMT -4. The time now is 01:18 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy