Help needed for non-SUN-HDD (original Seagate) in V880 Post: 302516819

Sponsored Content

Special Forums Hardware Help needed for non-SUN-HDD (original Seagate) in V880 Post 302516819 by baykan on Monday 25th of April 2011 08:36:34 AM

04-25-2011

Registered User

Code:

root@xxxxx # format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1f,700000/scsi@2/sd@0,0
       1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1f,700000/scsi@2/sd@1,0
       2. c1t2d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1f,700000/scsi@2/sd@2,0
       3. c1t3d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1f,700000/scsi@2/sd@3,0
Specify disk (enter its number): 2
selecting c1t2d0
[disk formatted]


FORMAT MENU:
        disk       - select a disk
        type       - select (define) a disk type
        partition  - select (define) a partition table
        current    - describe the current disk
        format     - format and analyze the disk
        repair     - repair a defective sector
        label      - write label to the disk
        analyze    - surface analysis
        defect     - defect list management
        backup     - search for backup labels
        verify     - read and display labels
        save       - save new disk/partition definitions
        inquiry    - show vendor, product and revision
        volname    - set 8-character volume name
        !<cmd>     - execute <cmd>, then return
        quit
format> type


AVAILABLE DRIVE TYPES:
        0. Auto configure
        1. Quantum ProDrive 80S
        2. Quantum ProDrive 105S
        3. CDC Wren IV 94171-344
        4. SUN0104
        5. SUN0207
        6. SUN0327
        7. SUN0340
        8. SUN0424
        9. SUN0535
        10. SUN0669
        11. SUN1.0G
        12. SUN1.05
        13. SUN1.3G
        14. SUN2.1G
        15. SUN2.9G
        16. Zip 100
        17. Zip 250
        18. Peerless 10GB
        19. SUN72G
        20. other
Specify disk type (enter its number)[19]:0

Select Auto configure ...

baykan

View Public Profile for baykan

Find all posts by baykan

10 More Discussions You Might Find Interesting

1. UNIX Benchmarks

Sun V880 Solaris 9

notes: System Configuration: Sun Microsystems sun4u Sun Fire 880 System clock frequency: 150 MHz Memory size: 8192 Megabytes Run E$ CPU CPU Brd CPU MHz MB Impl. Mask --- --- ---- ---- ------- ---- A 0 750 8.0 US-III 5.4 B 1 ...

2. Solaris

How to configure my SAN with Sun V880 servers to run Oracle 9i

Hi: I am in the process of configuring the SAN for Solaris to host 6 oracle 9i databases. We have 30 -146 GB disks stiped with RAID 10 for SAN. Of which 11 are dedicated for databsaes related things. Then we have 2 v880 Sun Servers with 16 -73 GB disks and 24 GB memory. The questions...

3. Solaris

Sun v440/v880 network adapter teaming

Is it possible to team two network adapters for fault tolerance in a Sun v440 or v880 Solaris 8 box? If so how would I go about doing so?

4. Solaris

Sun V880

I have two mechine, one is SUN V880 and another is IBM p570. I run the same script on V880 and p570 , why the cpu usage always under 50% on V880 but the cpu usage can growth to 100% on p570.

5. UNIX for Dummies Questions & Answers

unable to telnet from win xp to sun fire v880 server

Hi everybody i am trying to telnet to sun server from win xp machine but getting message "x21 error connection closed by remote user". i had make changes in /etc/default/login & /etc/fuser file still i have not getting telnet access. my win xp machines ip is 10.205.121.177 & sun server ip is...

6. Solaris

Adding new Hdd in sun 10 with vmware workstation

hi, i am using vmware workstation 6.0 and i installed sun solaris 10. when i add new hard disk(vm->>settings->>add). when i start the system and try to use format command there i only see my old one hdd (new added hdd is not showing). but my new hdd is showing at the bottom right as a icon where...

7. Hardware

sun sparc server hdd sled

does anyone know where to look for that piece of metal attached to hard drive that inserts it into server (fire v125)? I've tried ebay, with no luck. (seller requires verified paypal address which is unpossible here)

8. AIX

IBM AIX Internal HDD vs SAN HDD and Oracle

Hi Folks, I am facing an issue with the performance. P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and...

9. Solaris

Making HDD backup in sun Solaris system

Hello to all, I have Fujitsu Celzius M470 workstation which has Sun solaris system installed and want to make a complete backup of the hard drive. The existing HDD is SATA II, 500 GB. I don't have much experience working with SUN solaris systems (not at all) but have some experience with...

10. UNIX for Advanced & Expert Users

Cp freezing from Seagate HDD to Win7

Hello all, Earlier I had a mac book and created a HFS+ file system on Seagate 1 TB external HDD, copied around 200 GB content. Now, I have a Windows 7 machine and wanted to copy the HDD contents to this new machine. Tried using MacDrive10 to mount HFS+ file system in Windows. Mouting is fine and...

LEARN ABOUT NETBSD

svhlabel

SVHLABEL(8)						    BSD System Manager's Manual 					       SVHLABEL(8)

NAME

     svhlabel -- update disk label from SGI Volume Header

SYNOPSIS

     svhlabel [-fqrw] device

DESCRIPTION

     svhlabel is used to update a NetBSD disk label from the Silicon Graphics Volume Header on disks that were previously used on IRIX systems.

     svhlabel scans the Volume Header contained in the first blocks of the disk and generates additional partition entries for the disk from the
     entries found.

     Each Volume Header entry which does not have an equivalent partition in the disk label (equivalent in having the same size and offset) is
     added to the first free partition slot in the disk label.	A free partition slot is defined as one with an fstype of 'unused' and a size of
     zero ('0').  If there are not enough free slots in the disk label, a warning will be issued.

     The raw partition (typically partition c, but d on i386 and some other platforms) is left alone during this process.

     By default, the proposed changed disk label will be displayed and no disk label update will occur.

     Available options:

     -f  Force an update, even if there has been no change.

     -q  Performs operations in a quiet fashion.

     -r  In conjunction with -w, also update the on-disk label.  You probably do not want to do this.

     -w  Update the in-core label if it has been changed.

SEE ALSO

     disklabel(8), dkctl(8), mount_efs(8), sgivol(8)

HISTORY

     The svhlabel command appeared in NetBSD 5.0.

BSD
								 February 26, 2007							       BSD

10 More Discussions You Might Find Interesting

1. UNIX Benchmarks

Sun V880 Solaris 9

Discussion started by: tnorth

2. Solaris

How to configure my SAN with Sun V880 servers to run Oracle 9i

Discussion started by: oracle_dba

3. Solaris

Sun v440/v880 network adapter teaming

Discussion started by: ghuber

4. Solaris

Sun V880

Discussion started by: golden