All,
I see that there are 2 nic card available . How can I know all the details about these 2 nic cards.
-rw-r--r-- 1 root root 10 Apr 16 15:00 hostname.bge0
-rw-r--r-- 1 root other 17 Apr 22 08:56 hostname.bge2
please let me know
thanks
-prasad (4 Replies)
Hi , I came across a SUN server whereby it was installed with additional ethernet card. By right in any configuration, you would probably see the onboard ports Net0,Net1 and so on should correspond to e1000g0,e1000g1...
But instead the ext PCI takes precedence in the order and the Net0 becomes... (3 Replies)
how can I determine which NIC card is virtual NIC Card
which condition can make a decision
Does HP UX have Virtual Network Adapter Concept
if ,it has
where I can Find if I Install Virutal Network Adapter
or which command that i can get it
or which software can generate
thanks (2 Replies)
Hi All,
How can I find out which is ETH5 on my AIX P5 system. I have about seven different NIC card on this. I did move the cable to each one but still I was not able to see the link light up when I did netstat -v
Any idea?
Thanks. (2 Replies)
I couldn't install my nic in solaris 10. I compiled and added
the driver but failed to attach the driver and ifconfig output
shows only loopback dev. Please see the following output and tell
me whether my nic has been detected and why the driver failed to
attach?
My nic is detected in linux... (0 Replies)
I am new in squid proxy.
My question is how to (and if it's necessary) to set one NIC for inbound traffic (http requests) and one NIC for outbound traffic (http answers)?
Thank you in advance! (4 Replies)
Hi all,
I'm having some trouble identifying what route is being used to talk to a target host. I can figure it out by looking at the routing tables but I want to automate this and don't much feel like scripting the network mask logic when I'd think there'd be a way to have the OS do it for me.... (5 Replies)
Dear All
I want tune my NIC's rps, rfs and xps value.
In my system I have two NIC (eth0, eth1) and I have a bond0 ( eth0, eth1).
Here is the question? Which device should I modify ?
eth0 and eth1? or just modify bond0 or modify all device (eth0, eth1, bond0)
Any advice is welcome.... (0 Replies)
Hello Admins,
My ask is how can I add two different subnet IPs to same box with two different gateways?
The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware.
How can I get connected... (4 Replies)
Discussion started by: snchaudhari2
4 Replies
LEARN ABOUT OPENSOLARIS
chxge
chxge(7D) Devices chxge(7D)NAME
chxge - Chelsio Ethernet network interface controllers
SYNOPSIS
/dev/chxge
DESCRIPTION
The chxge Ethernet driver is a multi-threaded, loadable, clonable, STREAMS hardware driver supporting the connectionless Data Link
Provider Interface, dlpi(7P), over Chelsio NIC controllers. Multiple (and mixed) NIC controllers installed within the system are sup-
ported by the driver. The chxge driver provides basic support for the NIC hardware. Functions include chip initialization, frame transmit
and receive, and error recovery and reporting.
APPLICATION PROGRAMMING INTERFACE
The cloning, character-special device /dev/chxge is used to access NIC devices installed within the system.
CHXGE AND DLPI
The chxge driver is dependent on /kernel/misc/gld, a loadable kernel module that provides the chxge driver with the DLPI and STREAMS
functionality required of a LAN driver. See gld(7D) for more details on the primitives supported by the driver.
The values returned by the driver in the DL_INFO_ACK primitive in response to the DL_INFO_REQ are:
o Default Maximum SDU is 1500 (ETHERMTU).
o dlsap address length is 8.
o MAC type is DL_ETHER.
o The sap length value is -2, meaning the physical address component is followed immediately by a 2-byte sap component within
the DLSAP address.
o Broadcast address value is Ethernet/IEEE broadcast address (FF:FF:FF:FF:FF:FF).
FILES
/dev/chxge Character special device.
/kernel/drv/sparcv9/chxge SPARC chxge driver binary.
/kernel/drv/chxge x86 platform kernel module. (32-bit).
/kernel/drv/amd64/chxge x86 platform kernel module. (64-bit).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |SPARC, x86 |
+-----------------------------+-----------------------------+
SEE ALSO netstat(1M), attributes(5), gld(7D), dlpi(7P), gld(9F), gld_mac_info(9S)SunOS 5.11 17 Jan 2005 chxge(7D)
04-24-2011
