try to run your application server script manually and check where it fails
for db2nodes.cfg, I use the following lines in my Scripts:
As I understand, modification of db2nodes.cfg file is the responsiblity of the DB2 start script. So, if that is not happening then something is wrong in the DB script and not an issue with HACMP configuration itself?
In simple, HACMP is not directly responsible for modifying this file with the correct nodename..right? instead it should be the DB2 start script(which is initiated by HACMP) that should be doing it?
Hello
I am a noobie to HACMP
I have 2 55A servers and a 7031 disk subsystem
For HACMP to work, do I need to have the hdisks on both servers to match the same drives??
The hdisks on each box are currently different:
hdisk0 and hdisk1 are the internal disks and hdisk2-5 are on the D24 on... (1 Reply)
Hello All,
Here is a snipet from our cluster.log, I was wondering if anyone could shed some light on what may have caused the failover.
The first two lines indicate a possible memory issue which I am currently looking into.
Thanks. (0 Replies)
Hi,
Can anybody advice whether it is possible to configure HACMP in HP-UX Server.
To my knowledge HACMP is IBM Solution.
Thanks && Regards,
N. Poorna Chandra Rao. (2 Replies)
Hi All,
My company is going to upgrade the db2 on the one node hacmp, I think there's one backup.
After the upgrade of the db2. Do I need to restart cluster and server? I mean, do a graceful shutdown of the cluster, reboot the server and do a cluster start. Is that it? Do I need to reboot... (1 Reply)
Hi All,
How do I failover on the ip load balancer (back and forth)? It involves first to load a new config on the passive ip. If success, load the new config on the ip active (which is now passive).
Any idea, please.
Thanks in advance. (0 Replies)
Hi,
My NFS does not work till I start HACMP. The NFS service is indeed started when server starts. But it is not in active state, when I use lssrc to check NFS services' status I find they are all in inoperative status. But after I start HACMP (smitty clstart), all NFS services become active... (4 Replies)
Would anyone please kindly help to solve this problem...
An LPAR with the below network configuration. ent0 and ent1 are logical lan (virtual ethernet) from VIO SEA.
en0
1.2.3.4 <- boot ip
192.168.1.1 <- persistent ip
192.168.1.10 <- service ip
en1
11.22.33.44 <- boot ip
When I... (6 Replies)
Hi all,
I remember way back in some old environment, having the HA cluster services not being started automatically at startup, ie. no entry in /etc/inittab.
I remember reason was (taken a 2 node active/passive cluster), to avoid having a backup node being booted, so that it will not... (4 Replies)
Discussion started by: zaxxon
4 Replies
LEARN ABOUT REDHAT
bos_getrestart
BOS_GETRESTART(8) AFS Command Reference BOS_GETRESTART(8)NAME
bos_getrestart - Displays the automatic restart times for server processes
SYNOPSIS
bos getrestart -server <machine name> [-cell <cell name>]
[-noauth] [-localauth] [-help]
bos getr -s <machine name> [-c <cell name>] [-n]
[-l] [-h]
DESCRIPTION
The bos getrestart command displays two restart times from the /etc/openafs/BosConfig file on the server machine named by the -server
argument:
o The general restart time at which the BOS Server process automatically restarts itself and all processes marked with status "Run" in
the BosConfig file. The default is Sunday at 4:00 a.m.
o The binary restart time at which the BOS Server automatically restarts any process for which the time stamp on the binary file in the
/usr/lib/openafs directory is later than the last restart time for the process. The default is 5:00 a.m. Use the bos getdate command to
list a binary file's timestamp, and the -long flag to the bos status command to display a process's most recent restart time.
Use the bos setrestart command to set the restart times.
OPTIONS -server <machine name>
Indicates the server machine for which to display the restart times. Identify the machine by IP address or its host name (either fully-
qualified or abbreviated unambiguously). For details, see bos(8).
-cell <cell name>
Names the cell in which to run the command. Do not combine this argument with the -localauth flag. For more details, see bos(8).
-noauth
Assigns the unprivileged identity "anonymous" to the issuer. Do not combine this flag with the -localauth flag. For more details, see
bos(8).
-localauth
Constructs a server ticket using a key from the local /etc/openafs/server/KeyFile file. The bos command interpreter presents the ticket
to the BOS Server during mutual authentication. Do not combine this flag with the -cell or -noauth options. For more details, see
bos(8).
-help
Prints the online help for this command. All other valid options are ignored.
OUTPUT
The output consists of two lines:
Server <machine_name> restarts at <time>
Server <machine_name> restarts for new binaries at <time>
Possible values for <time> include:
o "never", indicating that the BOS Server never performs that type of restart.
o "now", indicating that the BOS Server performs that type of restart only each time it restarts.
o A specified day and time, indicating that the BOS Server performs that type of restart once per week. Example: "sun 4:00 am".
o A specified time, indicating that the BOS Server performs that type of restart once per day. Examples: "11:00 pm", "3:00 am".
EXAMPLES
The following example displays the restart times for the machine "db2.abc.com":
% bos getrestart db2.abc.com
Server db2.abc.com restarts at sun 4:00 am
Server db2.abc.com restarts for new binaries at 2:15 am
In the following example, the issuer abbreviates the machine name "fs1.abc.com" to "fs1", relying on the cell's name server to resolve the
name. The output echoes the abbreviated form.
% bos getrestart fs1
Server fs1 restarts at sat 5:00 am
Server fs1 restarts for new binaries at 11:30 pm
PRIVILEGE REQUIRED
None
SEE ALSO BosConfig(5), KeyFile(5), bos(8), bos_getdate(8), bos_setrestart(8), bos_status(8)COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0. It was converted from HTML to POD by software written by Chas
Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.
OpenAFS 2012-03-26 BOS_GETRESTART(8)