Solaris 10 (Sun V210) System hangs every couple of months. Have to go into ALOM to reset. I did a consolehistory report and seen this in it.
System also has a Business Policy Switch installed. I checked the logs and info in it and seen that the BPS power cycled 6 days ago. There is no information in the system (v210) that shows anything around the time the BPS power cycled.
Thanks,
Last edited by DukeNuke2; 04-20-2011 at 04:56 PM..
Hi,
We are having an automated system installed on SCO unixware, which runs a End Of Day routine during midnight. Since few days system is hanging at data backup, I have checked the log, system hangs exactly on data compression, any idea or help that why system is hanging only on compression....... (10 Replies)
I'm setting up a server with software RAID1, and everything is working perfectly, except that when I pull either of the drives, the system completely hangs and has to be rebooted. The computer is a Tyan Transport GX28, which is alleged to have hot-swappable SATA. I can fail a drive and the system... (1 Reply)
hi,
i am working on device drivers in linux kernel-2.6.11. Distribution is Mandrake-10.2. Basically i have to port the driver from kernel-2.4 to kernel-2.6.11.
My system hangs,when ever an application calls select.
Basically the kernel code for select,
contains only 2 apis
void poll_wait... (0 Replies)
Hi,
today when i started the OS Sun Solaris 10 it hangs on initialization. Following was shown in the end of the screen
Initializing system
Please wait....
*
Please help? (3 Replies)
I am running OpenIndiana development version oi_148 32-bit on a seven-year-old Dell Inspiron 8600.
Seems to be running fine except for one particular annoyance: It freezes whenever a system bell/beep plays.
I have mitigated this by turning the system bell off in gnome-terminal, which I use... (3 Replies)
Hi folks,
I am facing issue of my system (host1) getting hanged after throwing following ntpd messages. I am not able to ssh to the server there after. only option is to restart the host:
Dec 29 02:58:51 host1 ntpd: time reset -0.207907 s
Dec 29 02:58:51 host1 ntpd: synchronisation lost
Dec 29... (0 Replies)
Hi,
We've got a Sun Fire V245 that's failing to boot from either boot disk (mirrored using SVM). It simply hangs after loading a few modules:
Sun Fire V245, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.22.22, 1024 MB memory installed, Serial... (5 Replies)
Got a strange problem.
I have 4 Solaris servers all configured the same, Solaris 10 x86 update 10.
When I try to ssh from one Solaris 10 server to another server ssh hangs.
I have an identical server and when I try this everything works fine.
The weird thing is if I am root on the server... (1 Reply)
Hi,
We're using -
openldap-2.3.43-12.el5_6.5
nss_ldap-253-25.el5
on RHEL-5.5
Intermittently the entire system hangs, no message is present in any of the log files, login to the system fails, ssh fails, ping fails, the only way to recover is to hard-boot the system.
We consulted... (3 Replies)
Hi, I've got an issue which I've been 'google-fu'ing without much luck. We have a legacy program which has been plagued by an issue for a long time and I've been tasked to investigate/fix.
The program uses XMotif2.1 (required due to dependency on an old GUI designer) and runs on a RHEL7... (4 Replies)
Discussion started by: altrefrain
4 Replies
LEARN ABOUT POSIX
tran_bus_reset
tran_bus_reset(9e) Driver Entry Points tran_bus_reset(9e)NAME
tran_bus_reset - reset a SCSI bus
SYNOPSIS
#include <sys/scsi/scsi.h> int prefix
tran_bus_reset(dev_info_t *hba_dip, int level);
INTERFACE LEVEL
Solaris DDI
PARAMETERS
hba_dip The dev_info_t pointer associated with the SCSI HBA.
level The level of reset required.
DESCRIPTION
The tran_bus_reset() vector in the scsi_hba_tran(9S) structure should be initialized during the HBA driver's attach(9E). It is an HBA
entry point to be called when a user initiates a bus reset through device control interfaces.
tran_bus_reset() must reset the SCSI bus without resetting targets.
level will be one of the following:
RESET_BUS Reset the SCSI bus only, not the targets.
Implementation is hardware specific. If it is not possible to reset the SCSI bus without changing the state and operating mode of the tar-
gets, the HBA driver should not initialize this vector or return failure.
RETURN VALUES
tran_bus_reset() should return:
1 on success.
0 on failure.
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|Stability Level |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO attributes(5), tran_quiesce(9E), scsi_hba_tran(9S)SunOS 5.10 17 Mar 1999 tran_bus_reset(9e)