I've been using AIX cifs to mount windows XP shares with no problems till now.
Now it's Windows Server 2008 R2 - no go:
Response is so instant that it's clearly not a network issue (while network admin was configuring access I saw significant timeouts while network access was closed).
Windows XP share works on the same machine.
Tried these AIX levels:
AIX 6100-02-04
AIX 6100-06-03
So I consider AIX level is not an issue either?
this is probably a bit dumb ...but i read somewhere that one of the nfs versions can be mounted on a windows 2003 server ..if yes ..does anyone know how this can be achieved (1 Reply)
Hi all,
Hopefully this question hasn't been asked a thousand times. I am trying to connect a Windows Server to an exported NFS share which resides on an AIX box.
I think the directory is exported correctly from the AIX side but I can't verify that because I didn't do it myself. On the... (6 Replies)
Share ServerA
==== The Samba server is running on Samba version 3.0.22 based HP CIFS Server A.02.03.04
/opt/cifsclient/sbin/cifsclientd version: HP CIFS Client - Version A.02.02.02 smb file:
My previous casw was thew user wasn't able to write to the share from Windows... (1 Reply)
Dear Experts,
Im facing a unique situation. We got a windows server folder cifs mounted on my AIX server. Before restarting the win server I tried unmounting the cifs mount. It got hanged and win server was restarted however.
Now Im trying to mount the same. It prompts for password... (3 Replies)
Hi
i have some problem to mount a Windows Server 2008 R2 share on AIX. I found the artikel 157701-aix-cifs-mount-windows-server-2008-share on the Forum (cant post the Link) witch decribe my situation but there is no solution.
I can mount a share to a Windows 2003 SP2 Server but not to 2008 R2... (2 Replies)
I have an AIX box that mounts a Windows share across subnets. When I try to copy a 100 MB file to it, it copies around 2 MB/s. If I copy to another Windows share on the same subnet it copies around 12 MB/s. All I have is gigabit networks so I would expect it to go well over 12 MB/s, which is the... (8 Replies)
Hello AIX gurus,
I am trying to mount a CIFS share on AIX and I could use some help. Here are the environment details:
AIX - 6100-05-01-1016
Domain Controller - WIN2K8R2 (authentication takes place here)
CIFS share is stored on a NetApp storage array that is joined to the domain
I have... (2 Replies)
Hi,
How can we share a AIX drive on to Windows 2012 server. or vise versa.
Note: Not using NFS/CIFS/samba. (*we are not able to use samba/NFS/CIFS for some reason)
Requirement: How to have real time file sharing over the network between Windows and UNIX
Do you guys have any ... (4 Replies)
I have a Solaris 10 server, I'm trying to mount a share from a Windows nfs server. If I add this entry (tst-walnut:/test_sap_nfs - /majid nfs - yes rw,soft) to my /etc/vfstab, then I can mount, but when I create a file by root:root, the file owner changes to... (1 Reply)
Hi All
Actually I have NAS Storage and Suddenly I got problem
Unable to access the CIFS share folder on windows host, however the IP is pinging and the share is accessible via share name.
The share can be accessed via share name only on Windows higher Windows Versions.
Any help guys (4 Replies)
Discussion started by: Abu_SM
4 Replies
LEARN ABOUT SUSE
captoinfo
captoinfo(1) General Commands Manual captoinfo(1)NAME
captoinfo - convert a termcap description into a terminfo description
SYNOPSIS
captoinfo [-vn width] [-V] [-1] [-w width] file . . .
DESCRIPTION
captoinfo looks in file for termcap descriptions. For each one found, an equivalent terminfo description is written to standard output.
Termcap tc capabilities are translated directly to terminfo use capabilities.
If no file is given, then the environment variable TERMCAP is used for the filename or entry. If TERMCAP is a full pathname to a file,
only the terminal whose name is specified in the environment variable TERM is extracted from that file. If the environment variable TERM-
CAP is not set, then the file /usr/share/terminfo is read.
-v print out tracing information on standard error as the program runs.
-V print out the version of the program in use on standard error and exit.
-1 cause the fields to print out one to a line. Otherwise, the fields will be printed several to a line to a maximum width of 60 charac-
ters.
-w change the output to width characters.
FILES
/usr/share/terminfo Compiled terminal description database.
TRANSLATIONS FROM NONSTANDARD CAPABILITIES
Some obsolete nonstandard capabilities will automatically be translated into standard (SVr4/XSI Curses) terminfo capabilities by captoinfo.
Whenever one of these automatic translations is done, the program will issue an notification to stderr, inviting the user to check that it
has not mistakenly translated a completely unknown and random capability and/or syntax error.
XENIX termcap also used to have a set of extension capabilities for forms drawing, designed to take advantage of the IBM PC high-half
graphics. They were as follows:
If the single-line capabilities occur in an entry, they will automatically be composed into an acsc string. The double-line capabilities
and GG are discarded with a warning message.
IBM's AIX has a terminfo facility descended from SVr1 terminfo but incompatible with the SVr4 format. The following AIX extensions are
automatically translated:
Additionally, the AIX box1 capability will be automatically translated to an acsc string.
Hewlett-Packard's terminfo library supports two nonstandard terminfo capabilities meml (memory lock) and memu (memory unlock). These will
be discarded with a warning message.
NOTES
This utility is actually a link to tic(1), running in -I mode. You can use other tic options such as -f and -x.
The trace option is not identical to SVr4's. Under SVr4, instead of following the -v with a trace level n, you repeat it n times.
SEE ALSO infocmp(1), ncurses(3NCURSES), terminfo(5)
This describes ncurses version 5.7 (patch 20100109).
AUTHOR
Eric S. Raymond <esr@snark.thyrsus.com>
captoinfo(1)