No, you don't have an alpha. You have an x86 or an amd64.
Try cat /proc/cpuinfo to see what CPU you really have.
This is what I got:
Quote:
1) Turn it on
2) Check the CMOS settings to make sure the CDROM boots first (BIOS dependent)
3) Put in the disk
4) Wait
OK, that seems straightforward. Sorry for the stupid question.
Quote:
Forget option B. You can't do that and a bare-metal backup. You really ought to have a proper backup of the entire system if you're intending to put in a RAID at some point.
How you freshen the bare-metal backup would be completely different from option B. There's a couple ways to do it and none of them involve tar. How you do it depends on a) what you want to do b) what things you need to shut down to do so c) what devices the USB drive shows up as. We still know next to nothing about what your system is doing so I can't advise you on any of those.
Fair enough. When I get to the point of freshening the bare-metal backup, how would I go about figuring out that info so that you can continue to provide awesome advice?
Is there a command used to determine whether or not a machine has been RAIDed besides using 'df -k'. I am interested b/c I am writing a script where I would like to receive some sort of notification as to whether or not a machine has been RAIDed. The simpler the info returned back, the better. ... (2 Replies)
Hello there guys ,
I have this problem , i have this hp smart array 641 raid card and i'm trying to install sco unix 5.0.7 and is says no root disk found right before the instalation is about to start.
I know that you have to load the driver befor the install bud i really cannot find the... (0 Replies)
I was wanting to know if anyone knew how to setup RAID 0 on an old HP Unix server. It's for where I work and my boss has two hard drives and wants the second to take over if the first one fails hence RAID 0. If anyone could help me it would be greatly appreciated. (5 Replies)
Hello,
I wanted to setup user friendly ksh command prompt, by typing first character of files or directories and then tab bring up whole word. No need to type whole file/directory/command names.
Example:
cat a file like university
just typing un and then tab bring up whole university wod.... (3 Replies)
Hi guys,
I've been trying to do this for hours, and I've just been running around in circles trying to get this script made. I have a set of files outputted by an MSVC compiler that looks like this
1> helloworld.cpp
1> Note: including file: c:\dev\test\makefile\source\helloworld.h
1> ... (7 Replies)
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
I need to be able to make a backup image of an OLD UNIX server HD where I can restore the complete HD from scratch if (when) the HD fails. This server runs the accounting system for a company.
I can and have backed the data up via local FTP, but O/S and Apps are so old that I am not sure I could... (21 Replies)
Hello,
I have noticed some problems with Google complaining our site is not "https://search.google.com/www.usearch-console/mobile-friendly" using only Tapatalk.
So, after a lot of work, I have re-enabled our legacy mobile style and make some improvements and Google has declared us "mobile... (2 Replies)
Discussion started by: Neo
2 Replies
LEARN ABOUT OPENSOLARIS
isainfo
isainfo(1) User Commands isainfo(1)NAME
isainfo - describe instruction set architectures
SYNOPSIS
isainfo [ [-v] [-b | -n | -k] | [-x]]
DESCRIPTION
The isainfo utility is used to identify various attributes of the instruction set architectures supported on the currently running system.
Among the questions it can answer are whether 64-bit applications are supported, or whether the running kernel uses 32-bit or 64-bit device
drivers.
When invoked with no options, isainfo prints the names of the native instruction sets for applications supported by the current version of
the operating system. These are a subset of the list returned by isalist(1). The subset corresponds to the basic applications environments
supported by the currently running system.
OPTIONS
The following options are supported:
-b Prints the number of bits in the address space of the native instruction set.
-k Prints the name of the instruction set(s) used by the operating system kernel components such as device drivers and STREAMS modules.
-n Prints the name of the native instruction set used by portable applications supported by the current version of the operating system.
-v When used with the -b, -k or -n options, prints more detailed information.
-x Prints instruction extensions to the native ABI which are supported by the platform.
EXAMPLES
Example 1 Invoking isainfo on a 32-bit x86 Platform
The following example invokes isainfo on a 32-bit x86 platform:
example% isainfo -v
32-bit i386 applications
example% isainfo -k
i386
Example 2 Invoking isainfo on a System Running the 64-bit Operating System on a 64-bit SPARC Processor
The following example invokes isainfo on a system running the 64-bit operating system on a 64-bit SPARC processor:
example% isainfo
sparcv9 sparc
example% isainfo -n
sparcv9
example% isainfo -v
64-bit sparcv9 applications
32-bit sparc applications
example% isainfo -vk
64-bit sparcv9 kernel modules
Example 3 Invoking isainfo -x on an AMD Opteron CPU
The following example invokes isainfo with the -x option on an AMD Opteron CPU:
example% isainfo -x
i386: fpu tsc cx8 sep cmov mmx ammx a3dnow a3dnowx fxsr sse sse2 pause
EXIT STATUS
Non-zero Options are not specified correctly, or the command is unable to recognize attributes of the system on which it is running. An
error message is printed to stderr.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO isalist(1), uname(1), psrinfo(1M), getisax(2), sysinfo(2), attributes(5), isalist(5)SunOS 5.11 8 Feb 2007 isainfo(1)