No, you don't have an alpha. You have an x86 or an amd64.
Try cat /proc/cpuinfo to see what CPU you really have.
This is what I got:
Quote:
1) Turn it on
2) Check the CMOS settings to make sure the CDROM boots first (BIOS dependent)
3) Put in the disk
4) Wait
OK, that seems straightforward. Sorry for the stupid question.
Quote:
Forget option B. You can't do that and a bare-metal backup. You really ought to have a proper backup of the entire system if you're intending to put in a RAID at some point.
How you freshen the bare-metal backup would be completely different from option B. There's a couple ways to do it and none of them involve tar. How you do it depends on a) what you want to do b) what things you need to shut down to do so c) what devices the USB drive shows up as. We still know next to nothing about what your system is doing so I can't advise you on any of those.
Fair enough. When I get to the point of freshening the bare-metal backup, how would I go about figuring out that info so that you can continue to provide awesome advice?
Is there a command used to determine whether or not a machine has been RAIDed besides using 'df -k'. I am interested b/c I am writing a script where I would like to receive some sort of notification as to whether or not a machine has been RAIDed. The simpler the info returned back, the better. ... (2 Replies)
Hello there guys ,
I have this problem , i have this hp smart array 641 raid card and i'm trying to install sco unix 5.0.7 and is says no root disk found right before the instalation is about to start.
I know that you have to load the driver befor the install bud i really cannot find the... (0 Replies)
I was wanting to know if anyone knew how to setup RAID 0 on an old HP Unix server. It's for where I work and my boss has two hard drives and wants the second to take over if the first one fails hence RAID 0. If anyone could help me it would be greatly appreciated. (5 Replies)
Hello,
I wanted to setup user friendly ksh command prompt, by typing first character of files or directories and then tab bring up whole word. No need to type whole file/directory/command names.
Example:
cat a file like university
just typing un and then tab bring up whole university wod.... (3 Replies)
Hi guys,
I've been trying to do this for hours, and I've just been running around in circles trying to get this script made. I have a set of files outputted by an MSVC compiler that looks like this
1> helloworld.cpp
1> Note: including file: c:\dev\test\makefile\source\helloworld.h
1> ... (7 Replies)
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
I need to be able to make a backup image of an OLD UNIX server HD where I can restore the complete HD from scratch if (when) the HD fails. This server runs the accounting system for a company.
I can and have backed the data up via local FTP, but O/S and Apps are so old that I am not sure I could... (21 Replies)
Hello,
I have noticed some problems with Google complaining our site is not "https://search.google.com/www.usearch-console/mobile-friendly" using only Tapatalk.
So, after a lot of work, I have re-enabled our legacy mobile style and make some improvements and Google has declared us "mobile... (2 Replies)
Discussion started by: Neo
2 Replies
LEARN ABOUT DEBIAN
rdiff-backup-fs
RDIFF-BACKUP-FS(1) General Commands Manual RDIFF-BACKUP-FS(1)NAME
rdiff-backup-fs - Filesystem for accessing rdiff-backup archives.
SYNOPSIS
rdiff-backup-fs <mount_point> <repository> [repositories ...] [-option ...]
DESCRIPTION
rdiff-backup-fs is a filesystem in userspace that reads rdiff-backup archives and provides convenient access.
OPTIONS --debug <0-4>
Run rdiff-backup-fs in foreground with given verbosity of debug messages.
-f, --full
Store information about all revisions in memory. CAUTION: this may take a lot of memory if your archive contains many revisions.
-l, --last
Displays files from the most recent increment as directories, each holding every version of the file. CAUTION: this stores informa-
tion about all revisions in memory and therefore may take a lot of memory if archive contains many revisions.
-c <n>, --caching <n>
How many files retrieved from the rdiff-backup archive may be cached by filesystem. By default rdiff-backup-fs will cache up to 10
files. If this switch is set to 0, no caching will be done.
-r <n>, --revisions <n>
How many revisions should be stored in memory for on demand revision retrieval. By default rdiff-backup-fs will store up to 10 revi-
sions in memory.
-d, --directory <path>
Set directory for directory with temporary files. By default rdiff-backup-fs uses /tmp.
-v, --version
Print version of rdiff-backup-fs and exit.
SEE ALSO rdiff-backup(1)COPYRIGHT
rdiff-backup-fs is Copyright (c) 2007-2011 Filip Gruszczyski.
rdiff-backup-fs is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published
by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MER-
CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
AUTHORS
Filip Gruszczyski <gruszczy@gmail.com>
RDIFF-BACKUP-FS(1)