If you want to get performance statistics for a period of time just set up nmon to capture to a file for every 30 seconds or so for 24 hours, or however long you want. Then parse it through nmon analyzer and you can get a nice report on your entire systems utlization.
Hi everybody..
I am looking for an alternative command to 'format' since this is allowed only to the root user.
How do I do to get the same information as command format does here below ?
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
... (4 Replies)
Hi Friends,
I am using sun Solaris .
I want to find the disk space (df -k) for the Unix box and the data has to be sent to an email id.
Can u please find me a code that checks the disk space 6 times a day, loads the data into an excel sheet and sends to an email id.
Can u also tell me how to... (2 Replies)
Hi freinds,
What is the command to find out the hard disk details (logical name, FS type etc,). Because i connected one ntfs partition and i don't know the hard disk logical and physical name to mount it.Kindly do the needful.
Thanks | P.Bharathiraja. :mad: (2 Replies)
Hi,
We have a OEL5.7 installed and which has a storage attached on it.
While running application it shows poor performance for Disk IO "dm-0"
Now the question is how do I find what exactly is "dm-0"
# iostat
Linux 2.6.32-100.23.1.el5 03/10/2012
avg-cpu: %user %nice %system... (9 Replies)
Hi,
I need to monitor the disk space details in HP-UX . I need a command on how to display the information on below format
File System Total_Space_KB Used_Space_KB Available_Space_KB %Used
/u05 524288000 376235344 138799427 73%
/u02 ... (0 Replies)
Hi ,
Could you please tell me how to find the following on AIX?
1.Command to find file system details?
2.What are all the files exist under a specific directory along with their sizes?
In general we use,
du -sh * | grep M under a directory which returns files having size of MB,... (18 Replies)
Hello,
Just a quick question
Usually from a PSERIES if you want to connect to IBM SAN Storage
you connect the IBM SAN Storage through a SAN Switch
something like this
---
however my question
Can you connect
from Pseries directly to San Storage without SAN Switch
what would be... (8 Replies)
Hi,
We had a hardware problem with an IBM System p5 server, with AIX 5.2
We restore from a tape the last backup we had, but the server does not boot up as expected.
The server try to mount some directories from a storage, but could not comunicate with them, we check the FC and everything is... (12 Replies)
Medel : 9117-MMC
OS: AIX 6.1
Patch level : 6100-07-04-1216
Hacmp version : HACMP v 6.1.0.8
Oracle : 11.2.0.3 RAC
Node : 2 node
Dear, my one node server has been restarted early this morning, So, i tried to start HA and Oracle database.
after that, the follow error appears at the node... (1 Reply)
Discussion started by: tomato00
1 Replies
LEARN ABOUT ULTRIX
iostat
iostat(1) General Commands Manual iostat(1)Name
iostat - report I/O statistics
Syntax
iostat [ -c ] [ -t ] [ disknames ] [ interval ] [ count ]
Description
The command reports I/O statistics for terminals, disks and cpus. For terminals the number of input and output characters are counted.
For disks the number of 512 byte blocks per second and number of transfers per second are displayed. For cpus, it provides the percentage
of time the system has spent in user mode, in user mode running low priority (niced) processes, in system mode, and idling. On multipro-
cessor systems these cpu statistics represent a cumulative summary of all the cpus.
The optional disknames argument causes disk statistics to be displayed for the specified disks. If this argument is not specified then
disk statistics will be displayed for the first 3 disks only.
The optional interval argument causes to report once each interval seconds. The first report is for all time since a reboot and each sub-
sequent report is for the last interval only.
The optional count argument restricts the number of reports.
Options-c Displays the percentage of time each cpu spent in user mode, running low priority (nice'd) processes, in system mode, and idling.
-t Displays the number of characters read from and written to terminals.
Examples
This example will cause cpu and disk statistics for the 5 disks ra0, ra1, ra2, ra3, and ra4.
iostat ra0 ra1 ra2 ra3 ra4
This example will cause cpu, terminal, and disk statistics for ra0 to be displayed and updated every 2 seconds.
iostat -t ra0 2
FilesSee Alsovmstat(1), cpustat(1)iostat(1)