On your VIO Server type
You should get a # prompt.
This will put into more of a AIX compatible mode where you can run most of the normal AIX commands that zxmaus mentioned.
---------- Post updated at 11:00 PM ---------- Previous update was at 10:55 PM ----------
It looked to me like lg_dumplv is on hdisk0 and is not mirrored. You could move that lv from hdisk0 to hdisk1 with the command below after running the oem command mentioned above.
That would fee up about 1Gig on hdisk0.
I don't mean to butt in on this to much just throughing some other thoughts out there.
Hello All,
I am facing a problem on SCO Open Server V 5x, We are using serial communication on dumb terminals, right now i am facing a problem on some terminals, as they are not showing thier previous tty no, as tty13 or tty18, but they are showing ttya6 or ttya4, i also tried to move and link... (5 Replies)
I have a program that will fetch some particular lines and store it in a buffer for further operations.The code which is given below works but with some errors.I couldn't trace out the error.Can anybody help on this plz??
#include <stdio.h>
#include <stdlib.h>
#include<string.h>
#define... (1 Reply)
I have a scenario like the client has to search for the active server.There will be many servers.But not all server are active.And at a time not more than one server will be active.
The client will be in active state always i.e, it should always search for an active server until it gets one.I... (1 Reply)
i wrote a tiny version of tail command using a large buffer statically allocated but, in a second time, i found another version in which i use a bidimensional array dynamically allocated.
here is the first version
/*my tiny tail, it prints the last 5 line of a file
*/
#include<stdio.h>... (4 Replies)
Hi,
I have a problem one of the server file system cross the limitation
MountPoint / is 8% with 899.49MB free crossing threshold of 10% free
out put please help how to resolve this
dev/vx/dsk/bootdg/rootvol
9.8G 8.8G 956M 91% /
/devices ... (3 Replies)
Hi guys!
Could you tell me what's this figure about? (See the attached figure below.)
This is a representation of block allocation filesystem and extent allocation filesystem in Solaris.
Does this mean that in a block-based allocation, data are placed in individual blocks while in... (0 Replies)
I am using ubuntu. I have written a program to calculate prime factors. it works perfectly fine till entered number is less than 9989 (or so ) but when one enters a number higher than that, for example 15000, it does not work. Can anyone guide me whats the problem ? although new codes are welcome,... (2 Replies)
Discussion started by: Abhishek_kumar
2 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)