Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Free PP Allocation problem
Operating Systems AIX Free PP Allocation problem Post 302505742 by broonster on Thursday 17th of March 2011 04:44:26 PM
Old 03-17-2011
Quote:
Originally Posted by juredd1
On your VIO Server type
Code:
oem_setup_env

You should get a # prompt.

This will put into more of a AIX compatible mode where you can run most of the normal AIX commands that zxmaus mentioned.

---------- Post updated at 11:00 PM ---------- Previous update was at 10:55 PM ----------

It looked to me like lg_dumplv is on hdisk0 and is not mirrored. You could move that lv from hdisk0 to hdisk1 with the command below after running the oem command mentioned above.

Code:
migratepv -l lvname hdisk0 hdisk1

That would fee up about 1Gig on hdisk0.

I don't mean to butt in on this to much just throughing some other thoughts out there.

Did that also. Thanks for you help.
 

7 More Discussions You Might Find Interesting

1. SCO

Terminal Allocation Problem

Hello All, I am facing a problem on SCO Open Server V 5x, We are using serial communication on dumb terminals, right now i am facing a problem on some terminals, as they are not showing thier previous tty no, as tty13 or tty18, but they are showing ttya6 or ttya4, i also tried to move and link... (5 Replies)
Discussion started by: Awadhesh
5 Replies

2. Programming

Memory allocation problem

I have a program that will fetch some particular lines and store it in a buffer for further operations.The code which is given below works but with some errors.I couldn't trace out the error.Can anybody help on this plz?? #include <stdio.h> #include <stdlib.h> #include<string.h> #define... (1 Reply)
Discussion started by: vigneshinbox
1 Replies

3. Programming

Is there a problem with the memory allocation???

I have a scenario like the client has to search for the active server.There will be many servers.But not all server are active.And at a time not more than one server will be active. The client will be in active state always i.e, it should always search for an active server until it gets one.I... (1 Reply)
Discussion started by: vigneshinbox
1 Replies

4. Programming

dynamic allocation vs static allocation in c

i wrote a tiny version of tail command using a large buffer statically allocated but, in a second time, i found another version in which i use a bidimensional array dynamically allocated. here is the first version /*my tiny tail, it prints the last 5 line of a file */ #include<stdio.h>... (4 Replies)
Discussion started by: lucasclaus
4 Replies

5. Solaris

MountPoint / is 8% with 899.49MB free crossing threshold of 10% free

Hi, I have a problem one of the server file system cross the limitation MountPoint / is 8% with 899.49MB free crossing threshold of 10% free out put please help how to resolve this dev/vx/dsk/bootdg/rootvol 9.8G 8.8G 956M 91% / /devices ... (3 Replies)
Discussion started by: sriniva0
3 Replies

6. Solaris

Block-based allocation and Extent-based allocation in Solaris

Hi guys! Could you tell me what's this figure about? (See the attached figure below.) This is a representation of block allocation filesystem and extent allocation filesystem in Solaris. Does this mean that in a block-based allocation, data are placed in individual blocks while in... (0 Replies)
Discussion started by: arah
0 Replies

7. UNIX for Dummies Questions & Answers

Memory allocation problem

I am using ubuntu. I have written a program to calculate prime factors. it works perfectly fine till entered number is less than 9989 (or so ) but when one enters a number higher than that, for example 15000, it does not work. Can anyone guide me whats the problem ? although new codes are welcome,... (2 Replies)
Discussion started by: Abhishek_kumar
2 Replies

LEARN ABOUT DEBIAN

powerman-pdu

POWERMAN-PDU(8) 						    NUT Manual							   POWERMAN-PDU(8)

NAME

       powerman-pdu - Driver for Powerman PDU

SYNOPSIS

       powerman-pdu -h

       powerman-pdu -a PDU_NAME [OPTIONS]

	   Note
	   This man page only documents the hardware-specific features of the powerman-pdu driver. For information about the core driver, see
	   nutupsdrv(8).

SUPPORTED HARDWARE

       This driver supports a wide range of PDUs through the Powerman project.

       This includes various models from APC, Baytech, Cyclades, but also support IPMI and various blade management modules from HP, IBM and Sun.

EXTRA ARGUMENTS

       This driver doesn't support any optional settings.

INSTALLATION

       This driver is not built by default. You can build it by using "configure --with-powerman=yes".

UPS COMMANDS

       The following instant commands (see upscmd(8)) are available for each outlet of the PDU, with X standing for the outlet number:

       outlet.X.load.on
	   Power on the outlet.

       outlet.X.load.off
	   Power off the outlet.

       outlet.X.load.cycle
	   Cycle the outlet (power off then power on, possibly with a delay).

IMPLEMENTATION

       The hostname of the Powerman server is specified using the "port" value in ups.conf, i.e.:

	   [pdu]
		   driver = powerman-pdu
		   port = host.example.com:port

       The port used to reach powermand is optional if the default port is used.

KNOWN ISSUES

       In the current NUT version (2.4.1), ups.status is still exposed, with the value "WAIT". Some other values from the ups collection are also
       exposed.

AUTHOR

       Arnaud Quette <arnaud.quette@gmail.com>

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

       The PowerMan home page: http://powerman.sourceforge.net/

Network UPS Tools						    05/21/2012							   POWERMAN-PDU(8)
All times are GMT -4. The time now is 02:42 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy