On your VIO Server type
You should get a # prompt.
This will put into more of a AIX compatible mode where you can run most of the normal AIX commands that zxmaus mentioned.
---------- Post updated at 11:00 PM ---------- Previous update was at 10:55 PM ----------
It looked to me like lg_dumplv is on hdisk0 and is not mirrored. You could move that lv from hdisk0 to hdisk1 with the command below after running the oem command mentioned above.
That would fee up about 1Gig on hdisk0.
I don't mean to butt in on this to much just throwing some other thoughts out there.
Last edited by juredd1; 03-17-2011 at 06:47 PM..
Reason: corrections
Hello All,
I am facing a problem on SCO Open Server V 5x, We are using serial communication on dumb terminals, right now i am facing a problem on some terminals, as they are not showing thier previous tty no, as tty13 or tty18, but they are showing ttya6 or ttya4, i also tried to move and link... (5 Replies)
I have a program that will fetch some particular lines and store it in a buffer for further operations.The code which is given below works but with some errors.I couldn't trace out the error.Can anybody help on this plz??
#include <stdio.h>
#include <stdlib.h>
#include<string.h>
#define... (1 Reply)
I have a scenario like the client has to search for the active server.There will be many servers.But not all server are active.And at a time not more than one server will be active.
The client will be in active state always i.e, it should always search for an active server until it gets one.I... (1 Reply)
i wrote a tiny version of tail command using a large buffer statically allocated but, in a second time, i found another version in which i use a bidimensional array dynamically allocated.
here is the first version
/*my tiny tail, it prints the last 5 line of a file
*/
#include<stdio.h>... (4 Replies)
Hi,
I have a problem one of the server file system cross the limitation
MountPoint / is 8% with 899.49MB free crossing threshold of 10% free
out put please help how to resolve this
dev/vx/dsk/bootdg/rootvol
9.8G 8.8G 956M 91% /
/devices ... (3 Replies)
Hi guys!
Could you tell me what's this figure about? (See the attached figure below.)
This is a representation of block allocation filesystem and extent allocation filesystem in Solaris.
Does this mean that in a block-based allocation, data are placed in individual blocks while in... (0 Replies)
I am using ubuntu. I have written a program to calculate prime factors. it works perfectly fine till entered number is less than 9989 (or so ) but when one enters a number higher than that, for example 15000, it does not work. Can anyone guide me whats the problem ? although new codes are welcome,... (2 Replies)
Discussion started by: Abhishek_kumar
2 Replies
LEARN ABOUT CENTOS
hpipower
hpipower(1) OpenHPI hpipower(1)NAME
hpipower - This sample openhpi application exercises HPI Power Management APIs.
SYNOPSIS
hpipower [ -D nn ] [-N host[:port]] [-C <cfgfile>] [ -d -p -r -u -X -h] [ -b n ]
hpipower [--domain=nn] [--host=host[:port]] [--cfgfile=file]
[--power-down --power-up --reset --unattended --debug --help] [--blade=n ]
DESCRIPTION
hpipower searches the Resource Presence Table (RPT) for resources with Power Capability. It sends the requested power action to the
selected target.
If no domain or host is selected, hpipower uses the default domain as specified in the openhpiclient.conf file.
OPTIONS
Help Options:
-h, --help
Show help options
Application Options:
-d, --power-down
Power down target object
-p, --power-up
Power on target object
-r, --reset
Reset target object
-u, --unattended
Unattended
-b n, --blade=n
Specify blade n (1...n)
-D nn, --domain=nn
Select domain id nn
-X, --debug
Display debug messages
-N "host[:port]", --host="host[:port]"
Open session to the domain served by the daemon at the specified URL (host:port). This option overrides the OPENHPI_DAEMON_HOST and
OPENHPI_DAEMON_PORT environment variables. If host contains ':' (for example IPv6 address) then enclose it in square brackets. For
example: "[::1]" or "[::1]:4743".
-C "file", --cfgfile="file"
Use passed file as client configuration file. This option overrides the OPENHPICLIENT_CONf environment variable.
SEE ALSO
hpi_shell
hpialarms hpifan hpireset hpitop
hpidomain hpigensimdata hpisensor hpitree
hpiel hpiiinv hpisettime hpiwdt
hpievents hpionIBMblade hpithres hpixml
ohdomainlist ohhandler ohparam
AUTHORS
Authors of this man page:
Peter D Phan (pdphan@users.sourceforge.net)
Ulrich Kleber (ulikleber@users.sourceforge.net)
Anton Pak (avpak@users.sourceforge.net)
3.2.1 2011-09-20 hpipower(1)