SFTP(1) 						    BSD General Commands Manual 						   SFTP(1)

NAME

     sftp -- secure file transfer program

SYNOPSIS

     sftp [-1246Cpqrv] [-B buffer_size] [-b batchfile] [-c cipher] [-D sftp_server_path] [-F ssh_config] [-i identity_file] [-o ssh_option]
	  [-P port] [-R num_requests] [-S program] [-s subsystem | sftp_server] host
     sftp [user@]host[:file ...]
     sftp [user@]host[:dir[/]]
     sftp -b batchfile [user@]host

DESCRIPTION

     sftp is an interactive file transfer program, similar to ftp(1), which performs all operations over an encrypted ssh(1) transport.  It may
     also use many features of ssh, such as public key authentication and compression.	sftp connects and logs into the specified host, then
     enters an interactive command mode.

     The second usage format will retrieve files automatically if a non-interactive authentication method is used; otherwise it will do so after
     successful interactive authentication.

     The third usage format allows sftp to start in a remote directory.

     The final usage format allows for automated sessions using the -b option.	In such cases, it is necessary to configure non-interactive
     authentication to obviate the need to enter a password at connection time (see sshd(8) and ssh-keygen(1) for details).  The options are as
     follows:

     -1      Specify the use of protocol version 1.

     -2      Specify the use of protocol version 2.

     -4      Forces sftp to use IPv4 addresses only.

     -6      Forces sftp to use IPv6 addresses only.

     -B buffer_size
	     Specify the size of the buffer that sftp uses when transferring files.  Larger buffers require fewer round trips at the cost of
	     higher memory consumption.  The default is 32768 bytes.

     -b batchfile
	     Batch mode reads a series of commands from an input batchfile instead of stdin.  Since it lacks user interaction it should be used in
	     conjunction with non-interactive authentication.  A batchfile of '-' may be used to indicate standard input.  sftp will abort if any
	     of the following commands fail: get, put, rename, ln, rm, mkdir, chdir, ls, lchdir, chmod, chown, chgrp, lpwd, df, and lmkdir.  Ter-
	     mination on error can be suppressed on a command by command basis by prefixing the command with a '-' character (for example, -rm
	     /tmp/blah*).

     -C      Enables compression (via ssh's -C flag).

     -c cipher
	     Selects the cipher to use for encrypting the data transfers.  This option is directly passed to ssh(1).

     -D sftp_server_path
	     Connect directly to a local sftp server (rather than via ssh(1)).	This option may be useful in debugging the client and server.

     -F ssh_config
	     Specifies an alternative per-user configuration file for ssh(1).  This option is directly passed to ssh(1).

     -i identity_file
	     Selects the file from which the identity (private key) for public key authentication is read.  This option is directly passed to
	     ssh(1).

     -o ssh_option
	     Can be used to pass options to ssh in the format used in ssh_config(5).  This is useful for specifying options for which there is no
	     separate sftp command-line flag.  For example, to specify an alternate port use: sftp -oPort=24.  For full details of the options
	     listed below, and their possible values, see ssh_config(5).

		   AddressFamily
		   BatchMode
		   BindAddress
		   ChallengeResponseAuthentication
		   CheckHostIP
		   Cipher
		   Ciphers
		   Compression
		   CompressionLevel
		   ConnectionAttempts
		   ConnectTimeout
		   ControlMaster
		   ControlPath
		   GlobalKnownHostsFile
		   GSSAPIAuthentication
		   GSSAPIDelegateCredentials
		   HashKnownHosts
		   Host
		   HostbasedAuthentication
		   HostKeyAlgorithms
		   HostKeyAlias
		   HostName
		   IdentityFile
		   IdentitiesOnly
		   KbdInteractiveDevices
		   LogLevel
		   MACs
		   NoHostAuthenticationForLocalhost
		   NumberOfPasswordPrompts
		   PasswordAuthentication
		   PKCS11Provider
		   Port
		   PreferredAuthentications
		   Protocol
		   ProxyCommand
		   PubkeyAuthentication
		   RekeyLimit
		   RhostsRSAAuthentication
		   RSAAuthentication
		   SendEnv
		   ServerAliveInterval
		   ServerAliveCountMax
		   StrictHostKeyChecking
		   TCPKeepAlive
		   UsePrivilegedPort
		   User
		   UserKnownHostsFile
		   VerifyHostKeyDNS

     -P port
	     Specifies the port to connect to on the remote host.

     -p      Preserves modification times, access times, and modes from the original files transferred.

     -q      Quiet mode: disables the progress meter as well as warning and diagnostic messages from ssh(1).

     -R num_requests
	     Specify how many requests may be outstanding at any one time.  Increasing this may slightly improve file transfer speed but will
	     increase memory usage.  The default is 64 outstanding requests.

     -r      Recursively copy entire directories when uploading and downloading.  Note that sftp does not follow symbolic links encountered in the
	     tree traversal.

     -S program
	     Name of the program to use for the encrypted connection.  The program must understand ssh(1) options.

     -s subsystem | sftp_server
	     Specifies the SSH2 subsystem or the path for an sftp server on the remote host.  A path is useful for using sftp over protocol ver-
	     sion 1, or when the remote sshd(8) does not have an sftp subsystem configured.

     -v      Raise logging level.  This option is also passed to ssh.

INTERACTIVE COMMANDS

     Once in interactive mode, sftp understands a set of commands similar to those of ftp(1).  Commands are case insensitive.  Pathnames that con-
     tain spaces must be enclosed in quotes.  Any special characters contained within pathnames that are recognized by glob(3) must be escaped
     with backslashes ('').

     bye     Quit sftp.

     cd path
	     Change remote directory to path.

     chgrp grp path
	     Change group of file path to grp.	path may contain glob(3) characters and may match multiple files.  grp must be a numeric GID.

     chmod mode path
	     Change permissions of file path to mode.  path may contain glob(3) characters and may match multiple files.

     chown own path
	     Change owner of file path to own.	path may contain glob(3) characters and may match multiple files.  own must be a numeric UID.

     df [-hi] [path]
	     Display usage information for the filesystem holding the current directory (or path if specified).  If the -h flag is specified, the
	     capacity information will be displayed using "human-readable" suffixes.  The -i flag requests display of inode information in addi-
	     tion to capacity information.  This command is only supported on servers that implement the ``statvfs@openssh.com'' extension.

     exit    Quit sftp.

     get [-Ppr] remote-path [local-path]
	     Retrieve the remote-path and store it on the local machine.  If the local path name is not specified, it is given the same name it
	     has on the remote machine.  remote-path may contain glob(3) characters and may match multiple files.  If it does and local-path is
	     specified, then local-path must specify a directory.

	     If either the -P or -p flag is specified, then full file permissions and access times are copied too.

	     If the -r flag is specified then directories will be copied recursively.  Note that sftp does not follow symbolic links when perform-
	     ing recursive transfers.

     help    Display help text.

     lcd path
	     Change local directory to path.

     lls [ls-options [path]]
	     Display local directory listing of either path or current directory if path is not specified.  ls-options may contain any flags sup-
	     ported by the local system's ls(1) command.  path may contain glob(3) characters and may match multiple files.

     lmkdir path
	     Create local directory specified by path.

     ln oldpath newpath
	     Create a symbolic link from oldpath to newpath.

     lpwd    Print local working directory.

     ls [-1afhlnrSt] [path]
	     Display a remote directory listing of either path or the current directory if path is not specified.  path may contain glob(3) char-
	     acters and may match multiple files.

	     The following flags are recognized and alter the behaviour of ls accordingly:

	     -1      Produce single columnar output.

	     -a      List files beginning with a dot ('.').

	     -f      Do not sort the listing.  The default sort order is lexicographical.

	     -h      When used with a long format option, use unit suffixes: Byte, Kilobyte, Megabyte, Gigabyte, Terabyte, Petabyte, and Exabyte
		     in order to reduce the number of digits to four or fewer using powers of 2 for sizes (K=1024, M=1048576, etc.).

	     -l      Display additional details including permissions and ownership information.

	     -n      Produce a long listing with user and group information presented numerically.

	     -r      Reverse the sort order of the listing.

	     -S      Sort the listing by file size.

	     -t      Sort the listing by last modification time.

     lumask umask
	     Set local umask to umask.

     mkdir path
	     Create remote directory specified by path.

     progress
	     Toggle display of progress meter.

     put [-Ppr] local-path [remote-path]
	     Upload local-path and store it on the remote machine.  If the remote path name is not specified, it is given the same name it has on
	     the local machine.  local-path may contain glob(3) characters and may match multiple files.  If it does and remote-path is specified,
	     then remote-path must specify a directory.

	     If ether the -P or -p flag is specified, then full file permissions and access times are copied too.

	     If the -r flag is specified then directories will be copied recursively.  Note that sftp does not follow symbolic links when perform-
	     ing recursive transfers.

     pwd     Display remote working directory.

     quit    Quit sftp.

     rename oldpath newpath
	     Rename remote file from oldpath to newpath.

     rm path
	     Delete remote file specified by path.

     rmdir path
	     Remove remote directory specified by path.

     symlink oldpath newpath
	     Create a symbolic link from oldpath to newpath.

     version
	     Display the sftp protocol version.

     !command
	     Execute command in local shell.

     !	     Escape to local shell.

     ?	     Synonym for help.

SEE ALSO

     ftp(1), ls(1), scp(1), ssh(1), ssh-add(1), ssh-keygen(1), glob(3), ssh_config(5), sftp-server(8), sshd(8)

     T. Ylonen and S. Lehtinen, SSH File Transfer Protocol, draft-ietf-secsh-filexfer-00.txt, January 2001, work in progress material.

BSD
								 February 8, 2010							       BSD