Firstly, I can't stress enough how much of a newb I am to AIX or Linux in general so please be very patient. I am strictly a MS man, however I now need to administer an IBM power series blade server which sits on top of an AIX VIOS. The VIOS version I am running is 2.1.2.0 and it is mirrored on two physical disks.
I am currently trying to install the latest version of the VIOS but when I attempt to run the command updateios it complains that there is not enough space in the /usr filesystem.
I then attempted to extend the /usr filesytem using extendlv but I get the error "0516-404 allocp: This system cannot fulfill the allocation request.There are not enough free partitions or not enough physical volumes to keep strictness and satisfy allocation requests. The command should be retried with different allocation characteristics."
In troubleshooting this error on google I think the problem lies in the allocation of my free PPs over the two mirrored disks. Here is the output of lsvg -pv rootvg.
Code:
$ lsvg -pv rootvg
rootvg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk0 active 546 0 00..00..00..00..00
hdisk1 active 546 301 83..00..00..109..109
I think what I need to do is move some of the 301 free PPs from hdisk1 over to hdisk0 but I haven't a clue where to even start. Can anyone help? Again, go easy I'm extremely new to this and barely know the connection between LVs, PVs, PPs and LPs.
Moderator's Comments:
Please use [code] and [/code] tags when posting code, data or logs etc. to preserve formatting and enhance readability, thanks.
Last edited by zaxxon; 03-16-2011 at 04:36 AM..
Reason: code tags
Hello All,
I am facing a problem on SCO Open Server V 5x, We are using serial communication on dumb terminals, right now i am facing a problem on some terminals, as they are not showing thier previous tty no, as tty13 or tty18, but they are showing ttya6 or ttya4, i also tried to move and link... (5 Replies)
I have a program that will fetch some particular lines and store it in a buffer for further operations.The code which is given below works but with some errors.I couldn't trace out the error.Can anybody help on this plz??
#include <stdio.h>
#include <stdlib.h>
#include<string.h>
#define... (1 Reply)
I have a scenario like the client has to search for the active server.There will be many servers.But not all server are active.And at a time not more than one server will be active.
The client will be in active state always i.e, it should always search for an active server until it gets one.I... (1 Reply)
i wrote a tiny version of tail command using a large buffer statically allocated but, in a second time, i found another version in which i use a bidimensional array dynamically allocated.
here is the first version
/*my tiny tail, it prints the last 5 line of a file
*/
#include<stdio.h>... (4 Replies)
Hi,
I have a problem one of the server file system cross the limitation
MountPoint / is 8% with 899.49MB free crossing threshold of 10% free
out put please help how to resolve this
dev/vx/dsk/bootdg/rootvol
9.8G 8.8G 956M 91% /
/devices ... (3 Replies)
Hi guys!
Could you tell me what's this figure about? (See the attached figure below.)
This is a representation of block allocation filesystem and extent allocation filesystem in Solaris.
Does this mean that in a block-based allocation, data are placed in individual blocks while in... (0 Replies)
I am using ubuntu. I have written a program to calculate prime factors. it works perfectly fine till entered number is less than 9989 (or so ) but when one enters a number higher than that, for example 15000, it does not work. Can anyone guide me whats the problem ? although new codes are welcome,... (2 Replies)
Discussion started by: Abhishek_kumar
2 Replies
LEARN ABOUT OPENDARWIN
powerman-pdu
POWERMAN-PDU(8) NUT Manual POWERMAN-PDU(8)NAME
powerman-pdu - Driver for Powerman PDU
SYNOPSIS
powerman-pdu -h
powerman-pdu -a PDU_NAME [OPTIONS]
Note
This man page only documents the hardware-specific features of the powerman-pdu driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports a wide range of PDUs through the Powerman project.
This includes various models from APC, Baytech, Cyclades, but also support IPMI and various blade management modules from HP, IBM and Sun.
EXTRA ARGUMENTS
This driver doesn't support any optional settings.
INSTALLATION
This driver is not built by default. You can build it by using "configure --with-powerman=yes".
UPS COMMANDS
The following instant commands (see upscmd(8)) are available for each outlet of the PDU, with X standing for the outlet number:
outlet.X.load.on
Power on the outlet.
outlet.X.load.off
Power off the outlet.
outlet.X.load.cycle
Cycle the outlet (power off then power on, possibly with a delay).
IMPLEMENTATION
The hostname of the Powerman server is specified using the "port" value in ups.conf, i.e.:
[pdu]
driver = powerman-pdu
port = host.example.com:port
The port used to reach powermand is optional if the default port is used.
KNOWN ISSUES
In the current NUT version (2.4.1), ups.status is still exposed, with the value "WAIT". Some other values from the ups collection are also
exposed.
AUTHOR
Arnaud Quette <arnaud.quette@gmail.com>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
The PowerMan home page: http://powerman.sourceforge.net/
Network UPS Tools 05/21/2012 POWERMAN-PDU(8)
03-16-2011
