I've had a VXFS filesystem get corrupted and now it won't mount.
Can I run a fsck -y on the raw disk device or should something be
done within veritas? Veritas does not see the disk at the moment. (2 Replies)
Hi there,
My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct.
1. Break the sub-disks, plexes of the root mirror.
2. Remove the sub-disks,plexes of the root mirror.
3. Remove one of... (10 Replies)
I have a bogus disk that keeps showing up as failed from vxdisk list
- - disk hpdg failed was:c2t0d11s2
There isnt any c2 devices on the system:
# ls /dev/dsk/c2*
/dev/dsk/c2*: No such file or directory
# ls /dev/rdsk/c2*
/dev/rdsk/c2*: No such file or... (3 Replies)
I installed new internal disks in my p570. They will be part of a new AIX vg. Unfortunately, we have Veritas Volume Manager running on this AIX 5.2 ml 10 box. Veritas has grabbed control of the disks. I want AIX LVM to control the disks.
I cannot get these disks free of Veritas:
<lspv... (2 Replies)
People i have an a storage i create two virtual disk 1 y 2.
In the virtual disk 1 i configure 8 volumes and in the Vd2 configure 5 volumes.
Now i want to create a disk group called Prod2 y Dev2 but when i go to vxdiskadm and i choose add disk o encapusalte when i press list to list the disk... (0 Replies)
Need help getting all disk devices back on node 2 the same as node 1.
Recently Veritas and/or Sun cluster got wrecked on my 2 node Sun cluster after installing the latest patch cluster. I backed out the patches and then node 2 could see only half of the devices and Veritas drives (though format... (0 Replies)
Hi,
a little while ago, one of the GPT Partitioned hard disk had gone faulty in a Mirror RAID and is now successfully replaced.
here is how I did that.
1) created identical partition table on the new disk.
2) attached the mirrors using md commands.
The whole procedure is given... (5 Replies)
Hi,
a little while ago, one of the GPT Partitioned hard disk had gone faulty in a Mirror RAID and is now successfully replaced.
here is how I did that.
1) created identical partition table on the new disk.
2) attached the mirrors using md commands.
The whole procedure is given below:... (2 Replies)
Hi Experts,
I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system.
#hastatus -sum
-- System State Frozen
A node1 running 0
A node2 running 0
-- Group State
-- Group System Probed ... (1 Reply)
OSLevel: 5300-10-02-0943
System Model: IBM,8203-E4A
Power 6
==
Hi!
I replaced a failed pdisk in the raid enclosure as follows,
- rmdev -l 'pdisk18' '-d'
- Replaced it.
- cfgmgr (detected)
- I can see the new drive, with the correct serial #
lscfg -v -l pdisk18
pdisk18... (2 Replies)
Discussion started by: estrar
2 Replies
LEARN ABOUT SUSE
glutignorekeyrepeat
glutIgnoreKeyRepeat(3GLUT) GLUT glutIgnoreKeyRepeat(3GLUT)NAME
glutIgnoreKeyRepeat - determines if auto repeat keystrokes are reported to the current window
SYNTAX
void glutIgnoreKeyRepeat(int ignore);
ARGUMENTS
ignore Non-zero indicates auto repeat keystrokes should not be reported by the keyboard and special callbacks; zero indicates that auto
repeat keystrokes will be reported.
DESCRIPTION
glutIgnoreKeyRepeat determines if auto repeat keystrokes are reported to the current window. The ignore auto repeat state of a window can
be queried with glutDeviceGet(GLUT_DEVICE_IGNORE_KEY_REPEAT).
Ignoring auto repeated keystrokes is generally done in conjunction with using the glutKeyboardUpFunc and glutSpecialUpFunc callbacks to
repeat key releases. If you do not ignore auto repeated keystrokes, your GLUT application will experience repeated release/press call-
backs. Games using the keyboard will typically want to ignore key repeat.
GLUT IMPLEMENTATION NOTES FOR X11
X11 sends KeyPress events repeatedly when the window system's global auto repeat is enabled. glutIgnoreKeyRepeat can prevent these auto
repeated keystrokes from being reported as keyboard or special callbacks, but there is still some minimal overhead by the X server to con-
tinually stream KeyPress events to the GLUT application. The glutSetKeyRepeat routine can be used to actually disable the global sending
of auto repeated KeyPress events. Note that glutSetKeyRepeat affects the global window system auto repeat state so other applications will
not auto repeat if you disable auto repeat globally through glutSetKeyRepeat.
SEE ALSO
glutSetKeyRepeat, glutDeviceGet, glutKeyboardFunc, glutKeyboardUpFunc, glutSpecialFunc, glutSpecialUpFunc
AUTHOR
Mark J. Kilgard (mjk@nvidia.com)
GLUT 3.7 glutIgnoreKeyRepeat(3GLUT)