SMC multi port Printserver setup on AIX 6.1 Post: 302500322

10 More Discussions You Might Find Interesting

1. IP Networking

How to setup a PORT

Hi there, I need to specify a port on my server (Linux Red Hat 7.2) so that when I access it throgh the browser it forwards me to a certain webpage or folder on the server. For example, when I write http://domain.com: on the client side, it takes me to an administrator webpage on the server....

2. AIX

setup of 2 gateways on AIX

Please, anybody help on resolving the following problem? I have 2 netwotks ( 10.0.0.0 and 10.0.11.0 ) on 2 different areas I need both networks to telnet the corresponding ethernet card. This is a prblem because AIX is configured with a default gateway. Please advice how to assign 2...

3. IP Networking

printer port setup

Does anybody know how to add a printer from network in Solaris 10 using IP settings? according to our IT support, in order to add this printer in Windows XP we introduce it as a local printer which is connected to a port with an IP address, like 128.79.44.110. Anyway I don't know how it can be done...

4. Solaris

URGENT - setup port and dump all output to /dev/null or a file

Please help urgently. I need to setup up some sort of service on a solaris server on a port. I dont need it do anything special, anything that is sent to this port from an external server should be dump to /dev/null or a flat file.. Can you help urgently?

5. AIX

Console Setup for RS-232 port on 9131-52A

Hi, I have tried to setup the console on a Power5 9131-52A type IBM Server. On the back there are 2 RS-232 ports labeled T1 T2. I am going under the assuming that these are the serial ports (Normally the serial ports are S1 S0). When I finish assigning the console under smit, I get no response...

6. UNIX for Advanced & Expert Users

Printserver in linux

Hi, Could anyone please find any good tutorials for me on how to implement printserver in linux, how to make its automation and how to configure it with command line?? I've searched google and the net to find this things out but nothing comes as a useful result ..... Any help is highly...

7. AIX

AIX GPFS Setup

:cool:Hello, can someone guide me how to create a GPFS filesystem, I've read a couple of redbooks however certain things are still not certain, like if you require to download files or licenses... any help would be appreciated!

8. Web Development

Setup Serial Port

I need to set a serial port to 9600 7E1. How do I accomplish this? I've tried every combination, with no luck.

9. IP Networking

Port based multi interface routing

Hello, I wanted to setup routing certain traffic (http/s) out via a second (faster) interface, like described in the following docs (may not post urls): linux-ip.net /html/adv-multi-internet.html thegeekstuff.com /2014/08/add-route-ip-command/ I already had this working years ago on...

10. UNIX for Beginners Questions & Answers

New to AIX: How do I setup high availability on an AIX System

I am new to AIX but not new to unix. I have an interview for an AIX systems admin position and I know they want someone who has knowledge of High Availability, Failover and LPARs From my research so far, It appear powerha is used to setup high availability and failover on Power systems but is...

LEARN ABOUT DEBIAN

ib_rdma_lat

ib_rdma_lat(1)							   User Commands						    ib_rdma_lat(1)

NAME

       ib_rdma_lat - RDM latency test

SYNOPSIS

       ib_rdma_lat [ options ] [ server IP address ]

DESCRIPTION

       This program tests the latency  of RMDA write transactions.

OPTIONS

       -p, --port=<port>
	      listen on/connect to port <port> (default: 18515)

       -d, --ib-dev=<dev>
	      use IB device <dev> (default: first device found)

       -i, --ib-port=<port>
	      use port <port> of IB device (default: 1)

       -s, --size=<size>
	      size of message to exchange (default: 65536)

       -t, --tx-depth=<dep>
	      size of tx queue (default 100)

       -n, --iters=<iters>
	      number of exchanges (at least 2, default: 1000)

       -I, --inline_size=<size>
	      max size of message to be sent in inline mode (default 400)

       -C, --report-cycles
	      report times in cpu cycle units (default microseconds)

       -H, --report-histogram
	      print out all results (default print summary only)

       -U, --report-unsorted
	      (implies -H) print out unsorted results (default sorted)

       -c, --cma
	      use the RDMA CMA to setup the RDMA connection

       -V, --version
	      display version number

AUTHOR

       Guy Coates  < gmpc@sanger.ac.uk >

perftest							 February 20, 2008						    ib_rdma_lat(1)

10 More Discussions You Might Find Interesting

1. IP Networking

How to setup a PORT

Discussion started by: HAS

2. AIX

setup of 2 gateways on AIX

Discussion started by: mynikolas

3. IP Networking

printer port setup

Discussion started by: arash05

4. Solaris

URGENT - setup port and dump all output to /dev/null or a file

Discussion started by: frustrated1