Sponsored Content
Operating Systems AIX VIOS IVM unavailable - how do I restart it? Post 302499219 by need2bageek on Wednesday 23rd of February 2011 05:18:51 PM
Old 02-23-2011
VIOS IVM unavailable - how do I restart it?

Hi everyone,
Sorry if this post is in the wrong place. I searched the forums for "IVM" and it turned up no results. Hopefully someone knows about this. My dilemma is that I have multiple IBM JS12 Express blades in our blade center, each running VIOS 2.1.0.10-FP-20.1 and hosting a couple LPARs. Out of my 6 VIO servers, 3 of them have unavailable IVMs. The IVM (Integrated Virtualization Manager) is the web interface that comes up when you bring up http://<hostname> in a browser. On the 3 VIO servers experiencing this issue, I'm getting page cannot be displayed when going to the IVM. SSH works fine and I'm not finding any services stopped that should be running.

I don't know when or why the IVM has stopped working on half my VIO servers but I'd like to find a way to start the IVM without rebooting the blades. Reboots will surely fix this but will also cause production outages for the LPARs running on each blade - I'm trying to avoid that.

Has anyone dealt with this before? Any help is greatly appreciated.

Last edited by need2bageek; 02-23-2011 at 06:49 PM..
 

10 More Discussions You Might Find Interesting

1. AIX

IVM vs. HMC woes

I have a running VIO server that was managed via IVM. We made the (apparent) mistake of trying to connect a HMC server to it. Other than making a connection, no work has been done via HMC. We've since decided we don't want to use HMC and it's been powered off for a couple of weeks. However,... (1 Reply)
Discussion started by: cjs226
1 Replies

2. AIX

how to use command line in IVM

I have a bladecenter and js22, how to login IVM's command line such as HMC command line? (1 Reply)
Discussion started by: rainbow_bean
1 Replies

3. AIX

Cant login to the LPAR using IVM

Hi guys, I am kind of new to this PowerVM thing. I have created a virtual disk and partition. With the IVM, when I try to open terminal wndow, a virtual terminal appeared and ask for password. it says there: In order to acess the terminal, you must first authenticate with IVM Hostname... (2 Replies)
Discussion started by: wingcross
2 Replies

4. UNIX for Advanced & Expert Users

fork: Resource temporarily unavailable , server unexpectedly unavailable network connection

Solaris 10 Server refuse to connect :wall: fork: Resource temporarily unavailable , server unexpectedly unavailable network connection , refuse error, disconnect message, fatal error type2, (protocol error type2) Issue has been resolved after taken few steps :b: First of all need to check... (1 Reply)
Discussion started by: taherahmed
1 Replies

5. AIX

IVM

Can somebody help me on IVM? I have installed vio 2.2 on a js21 server. It has 2 physical ether ports, what I want to do is create ether channel say en15 and en16 are physical and en17 is ether channel. I have created 2 clients on this server, now the question is can I map this en17 to both... (1 Reply)
Discussion started by: vjm
1 Replies

6. AIX

VIOS IP address - separate vlan for vios servers ?

Hello, Lets say for simplicity that I do not use any vlan config inside my server - one lpar group use hea physical port1, another group hea physical port2. Physical port1 configured as vlan1 on external switch, physical port2 as vlan2. What is the common practice - should I isolate my vios... (0 Replies)
Discussion started by: vilius
0 Replies

7. AIX

IBM VIOS POWERVM IVM error

Hi, When I try to login on my vios ivm website http://vios through the browser -- all three of them -- firefox , chrome , Internet Explorer , i get this error http://vioserver/j_security_check I have java installed on the machine from where i am trying to open up the IVM/VIOS webpage. I... (2 Replies)
Discussion started by: filosophizer
2 Replies

8. AIX

CD-ROM issue with PowerVM IVM VIOS

I am facing problems in moving CD-ROM from one lpar to another. CDROM can be seen on the POWERVM (IVM) server , but through the web-access if I move it ( assign it ) to LPAR it will be assigned. I run cfgmgr , and the cdrom does not show up in the LPAR. I firmly believe this is the reason why I... (2 Replies)
Discussion started by: filosophizer
2 Replies

9. AIX

AIX VIOS IVM Ethernet problem

Hi All, I have a p520 box running 3 LPARs, 1 x VIOS, 1 x AIX 6.1 and 1 x AIX 7.1 and no HMC, all configuration is performed via VIOS/IVM Until recently the box did not have the AIX7.1 LPAR and everything was fine with the box. We needed to use AIX 7.1 for a new project, so I created a... (11 Replies)
Discussion started by: KevB
11 Replies

10. AIX

Powervm ivm vios

Hello, After installing on P6 which is POWERVM IVM VIOS enabled (VET CODE D21C77ACD9229817CA1F00002C10004164 ) i get this message "I/O hosting requires a hosting partition - boot not permitted". HMC was connected to the machine then HMC was removed through ASMI Searching on... (2 Replies)
Discussion started by: filosophizer
2 Replies
BOS_APROPOS(8)						       AFS Command Reference						    BOS_APROPOS(8)

NAME
bos_apropos - Displays each help entry containing a keyword string SYNOPSIS
bos apropos -topic <help string> [-help] bos ap -t <help string> [-h] DESCRIPTION
The bos apropos command displays the first line of the online help entry for any bos command that has in its name or short description the string specified by the -topic argument. To display the syntax for a command, use the bos help command. OPTIONS
-topic <help string> Specifies the keyword string to match, in lowercase letters only. If the string is more than a single word, surround it with double quotes ("") or other delimiters. -help Prints the online help for this command. All other valid options are ignored. OUTPUT
The first line of a command's online help entry names it and briefly describes its function. This command displays the first line for any bos command where the string specified with the -topic argument is part of the command name or first line. EXAMPLES
The following command lists all bos commands that include the word "restart" in their names or short descriptions: % bos apropos restart getrestart: get restart times restart: restart all processes setrestart: set restart times PRIVILEGE REQUIRED
None SEE ALSO
bos(8), bos_help(8) COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved. This documentation is covered by the IBM Public License Version 1.0. It was converted from HTML to POD by software written by Chas Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell. OpenAFS 2012-03-26 BOS_APROPOS(8)
All times are GMT -4. The time now is 02:06 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy