02-21-2011
Does the HBA is recognized in the OS.
if you are not sure, prtdiag -v and grep for version in /var/adm/messages, then check the fcinfo hba-port
10 More Discussions You Might Find Interesting
1. Solaris
Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to... (5 Replies)
Discussion started by: xiaochensg
5 Replies
2. AIX
Hi All,
SUN emulex HBA card has been installed on P520 box.
When i run the cfgmgr i am getting the following message.
lpar2#cfgmgr
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.... (0 Replies)
Discussion started by: b_manu78
0 Replies
3. IP Networking
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
Discussion started by: jwholey
0 Replies
4. Solaris
I understand that fcinfo hba-port should show information(WWN, HBA vendor, etc..) but my result show "No adapter found". If I used grep -i 'version' /var/adm/messages* then I see my installed HBA (QLogic FCode at 2.00.09).. I am wondering why and what I had failed to install?
Thanks in advance.... (23 Replies)
Discussion started by: Y4Net
23 Replies
5. Solaris
Hi Gurus
I need to know few things related to HBA port & fcinfo command
I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above... (6 Replies)
Discussion started by: girish.batra
6 Replies
6. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
7. Solaris
I have JNI FCE-6460-N fc card , it is detected in OK prompt.....I connected Sun StorEDGE A5000 FC storage.
in OK prompt, PROBE-SCSI-ALL
showing A5000 fc hdds details in ok prompt.....
but in OS level.....not showing the hdd, i tried in DEVFSADM command and FORMAT command not showing A5000... (3 Replies)
Discussion started by: anysystem
3 Replies
8. Red Hat
Hi,
How to determine if HBA card in getting faulty from linux host ? any pointers. (2 Replies)
Discussion started by: saurabh84g
2 Replies
9. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
10. Solaris
Dear all,
I have a new Oracle Blade X4-2B server, running Solaris 10.
The server comes with a HBA card that will not be used now. It has not fibers connected to it. As a consequence, its leds never stop flashing.
My question is: how to disable this HBA card, without removing it physically... (2 Replies)
Discussion started by: Gus1971
2 Replies
LEARN ABOUT OPENSOLARIS
hba_loadlibrary
HBA_LoadLibrary(3HBAAPI) Common Fibre Channel HBA Information Library Functions HBA_LoadLibrary(3HBAAPI)
NAME
HBA_LoadLibrary, HBA_FreeLibrary - load and free the resources used by the HBA Common Library
SYNOPSIS
cc [ flag... ] file... -lHBAAPI [ library... ]
#include <hbaapi.h>
HBA_STATUS HBA_LoadLibrary(void);
HBA_STATUS HBA_FreeLibrary(void);
DESCRIPTION
The HBA_LoadLibrary() function loads the Common Library, which in turn loads each VSL specified in the hba.conf(4) file.
The HBA_FreeLibrary() function releases resources held by the Common Library and each loaded VSL.
RETURN VALUES
Upon successful completion, HBA_LoadLibrary() and HBA_FreeLibrary() return HBA_STATUS_OK. Otherwise, an error value is returned.
ERRORS
See libhbaapi(3LIB) for general error status values.
EXAMPLES
Example 1 Load the common library and each VSL.
The following example loads the common library and each VSL.
if ((status = HBA_LoadLibrary()) != HBA_STATUS_OK) {
fprintf(stderr, "HBA_LoadLibrary failed: %d
", status);
return;
}
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-------------------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-------------------------------------+
|Interface Stability |Standard: FC-MI 1.92 (API version 1) |
+-----------------------------+-------------------------------------+
| |Standard: FC-HBA Version 4 (API ver- |
| |sion 2) |
+-----------------------------+-------------------------------------+
|MT-Level |Safe |
+-----------------------------+-------------------------------------+
SEE ALSO
libhbaapi(3LIB), hba.conf(4), attributes(5)
T11 FC-MI Specification
SunOS 5.11 1 Sep 2003 HBA_LoadLibrary(3HBAAPI)