autopush(1M)						  System Administration Commands					      autopush(1M)

NAME

       autopush - configures lists of automatically pushed STREAMS modules

SYNOPSIS

       autopush -f filename

       autopush -g -M major -m minor

       autopush -r -M major -m minor

DESCRIPTION

       The autopush command configures the list of modules to be automatically pushed onto the stream when a device is opened. It can also be used
       to remove a previous setting or get information on a setting.

OPTIONS

       The following options are supported:

       -f filename     Sets up the autopush configuration for each driver according to the information stored in filename. An autopush	file  con-
		       sists of lines of four or more fields, separated by spaces as shown below:

		       major minor last-minor module1 module2 ... module8

		       The  first  field  is  a  string that specifies the major device name, as listed in the /kernel/drv directory. The next two
		       fields are integers that specify the minor device number and last-minor device number. The fields following  represent  the
		       names of modules. If minor is -1, then all minor devices of a major driver specified by major are configured, and the value
		       for last-minor is ignored. If last-minor is 0, then only a single minor device is configured. To configure a range of minor
		       devices for a particular major, minor must be less than last-minor.

		       The remaining fields list the names of modules to be automatically pushed onto the stream when opened, along with the posi-
		       tion of an optional anchor. The maximum number of modules that can be pushed is eight. The modules are pushed in the  order
		       they  are  specified.  The optional special character sequence [anchor] indicates that a STREAMS anchor should be placed on
		       the stream at the module previously specified in the list; it is an error to specify more than one anchor  or  to  have	an
		       anchor first in the list.

			A nonzero exit status indicates that one or more of the lines in the specified file failed to complete successfully.

       -g	       Gets  the  current configuration setting of a particular major and minor device number specified with the -M and -m options
		       respectively and displays the autopush modules associated with it. It will also return the starting minor device number	if
		       the request corresponds to a setting of a range (as described with the -f option).

       -m minor        Specifies the minor device number.

       -M major        Specifies the major device number.

       -r	       Removes	the  previous  configuration  setting of the particular major and minor device number specified with the -M and -m
		       options respectively. If the values of major and minor correspond to a previously established setting of a range  of  minor
		       devices,  where minor matches the first minor device number in the range, the configuration would be removed for the entire
		       range.

EXIT STATUS

       The following exit values are returned:

       0	       Successful completion.

       non-zero        An error occurred.

EXAMPLES

       Example 1: Using the autopush command.

       The following example gets the current configuration settings for the major and minor device numbers as indicated and displays the autopush
       modules associated with them for the character-special device /dev/term/a:

       example# autopush -g -M 29 -m 0
       Major	 Minor	   Lastminor	 Modules
	 29	   0	     1		 ldterm  ttcompat

FILES

       /etc/iu.ap

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       bdconfig(1M), ttymon(1M), attributes(5), ldterm(7M), sad(7D),  streamio(7I), ttcompat(7M)

       STREAMS Programming Guide

SunOS 5.10							    26 Mar 1999 						      autopush(1M)