Adding new tape drives Post: 302497829

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

DDS Tape Drives

How do I find if a server contains a DDS3 or a DDS2 drive remotely ? I checked in SMIT and I noticed the description field according to tape drives, but is there another more thorough way? Thanks, Luke

2. Solaris

identifying Tape drives on Sun Servers

Hi, Can you please help me to locate tape drives on Sun Server and the capacity of the tape drive. I am managing a Sun 4u server. Need this urgently. Regards, Vivek

3. BSD

tape drives vs. tar with multiple directories

Hello, I have a little problem with backup & restoring files from tape drive. I am adding 3 directories to my tape, and it is OK: hades# tar -cvf /dev/nsa0 test test1 restore a test a test/level1 a test/myharddisk.img a test1 a test1/level1 a test1/myharddisk.img a test1/test.img a...

4. AIX

command to display my tape drives (rmt's)

Hi all, Looking for an ls** command to display my tape drives and their associated serial numbers. thx.

5. UNIX for Advanced & Expert Users

Scalar i500 can see tape drives but not autochanger

We have a new i500 and have 4 TLO4 drives which are connected directly to 2 FC cards on the host. The host can communicate with the autochanger through whichever drive that is set as control path. When I run inquire, all 4 drives are listed but auto changer doesn't show up. Does anyone know...

6. Filesystems, Disks and Memory

Tape drives used for taking backups

Hi, I am a abit new in AIX system administration field. I want to gather knowledge about backup techniques. As per my knowledge we use Tape archives for taking backups. Can anyone pls explain me in detail abt tape archive? Whether these tape archives come along with the systems or we have to...

7. Solaris

tape drives not recognised

I have a server/domain on a m5000 running Solaris 10. It is part of a cluster. The other cluster member sees tape drives, but this one does not. It is zoned correctly, and I can see the drives are binded in lputil. The st.conf, and devlink.tab are identical. ST.CONF: - # # Copyright...

8. Solaris

MPXIO not working on a machine with both SAN and Tape drives.

Hi, I have a machine, and mpzio fails everytime i reboot the server. The machine has tape drives and SAN storage, I'm not sure if that is my issue or not. I was told to not enable mpxio globally as that would do something bad to the tape drives. So, I set it to only make the two SAN connected...

9. AIX

AIX 7.1 cannot discover drives from TS3310 tape library

Good day! Need help in checking my AIX 7.1 box. After we have finished zoning our TS3200 and TS3310 tape libraries, we installed the Atape driver, # lslpp -L |grep tape Atape.driver 11.7.7.0 C F IBM AIX Enhanced Tape and devices.fcp.tape.rte 7.1.3.15 C ...

LEARN ABOUT REDHAT

tapeinfo

TAPEINFO(1)						      General Commands Manual						       TAPEINFO(1)

NAME

       tapeinfo - report SCSI tape device info

SYNOPSIS

       tapeinfo -f <scsi-generic-device>

DESCRIPTION

       The  tapeinfo  command  reads  various information from SCSI tape drives that is not generally available via most vendors' tape drivers. It
       issues raw commands directly to the tape drive, using either the  operating  system's  SCSI  generic  device  (	e.g.  /dev/sg0	on  Linux,
       /dev/pass0 on FreeBSD) or the raw SCSI I/O ioctl on a tape device on some operating systems.

       One  good  time	to  use 'tapeinfo' is immediately after a tape i/o operation has failed. On tape drives that support HP's 'tapealert' API,
       'tapeinfo' will report a more exact description of what went wrong.

       Do be aware that 'tapeinfo' is not a substitute for your operating system's own 'mt' or similar tape driver control program. It is intended
       to supplement, not replace, programs like 'mt' that access your operating system's tape driver in order to report or set information.

OPTIONS

       The first argument, given following -f , is the SCSI generic device corresponding to your tape drive.  Consult your operating system's doc-
       umentation for more information (for example, under Linux these are generally start at /dev/sg0 under FreeBSD these start at /dev/pass0).

       Under FreeBSD, 'camcontrol devlist' will tell you what SCSI devices you have, along with which 'pass' device controls  them.  Under  Linux,
       "cat /proc/scsi/scsi" will tell you what SCSI devices you have.

BUGS AND LIMITATIONS

       This program has only been tested on Linux with a limited number of tape drives (HP DDS4, Seagate AIT).

AVAILABILITY

       tapeinfo  is  currently being maintained by Eric Lee Green <eric@badtux.org> formerly of Enhanced Software Technologies Inc. The 'mtx' home
       page is http://mtx.sourceforge.net and the actual code is currently available there and via CVS from http://sourceforge.net/projects/mtx/ .

SEE ALSO

       mt(1),mtx(1),scsitape(1)

								    TAPEINFO1.0 						       TAPEINFO(1)