02-17-2011
the only thing would be the "ipmitool" but you need the ILOM IP anyway to use this tool. so you have to ways to get the ip.
1. reboot the system. the SP IP is shown on the BIOS screen during reboot.
2. use a serial line to connect to the SP.
6 More Discussions You Might Find Interesting
1. Solaris
I've been having trouble getting my old gateway computer on the net with solaris. All of the network stuff is built into the motherboard. Is there a way that I can get it recognized? (4 Replies)
Discussion started by: possuman72
4 Replies
2. Programming
how we can find whether net is connected or diconnected. (10 Replies)
Discussion started by: phani_sree
10 Replies
3. UNIX for Dummies Questions & Answers
I just installed Crux on my laptop, which means I'll have to configure /etc/rc.d/net to adapt to my wireless internet. When I ran Linux before, I connected through eth1. How should I configure the /etc/rc.d/net file accordingly?
Thanks for reading,
Octal. (0 Replies)
Discussion started by: Octal
0 Replies
4. Shell Programming and Scripting
Hello,
I ran into an issue in one of my monitoring scripts. If I use the public ip address in my connection string everything works, but if I switch the connection string ip to 127.0.0.1 or the internal ip I get, " Connection refused at... (1 Reply)
Discussion started by: Styles
1 Replies
5. Shell Programming and Scripting
I need a commnad to modify a file's contents from:
2009-06-18 14:14:38 CST INF Thread-114 rlo.aaf_ - MASSHANDLE: Got a valid message<Location=""><bob>2</bob><carol>61</carol><ted>54</ted><alice>1m</alice>
to this :
2009-06-18 14:14:38 CST INF Thread-114 rlo.aaf_ - MASSHANDLE: Got a... (4 Replies)
Discussion started by: linux_lou
4 Replies
6. Solaris
Hi,
These ports of My T1000 are off.
My Serial Management Port used to work.
It gave me access to the "sc>" window.
Now, i can't see it on my network (with the ZenMap tool)
So, i can't power on (or off) my sun T1000.
Can someone help me ?
Thanks (5 Replies)
Discussion started by: Begbie78
5 Replies
reboot(8) System Manager's Manual reboot(8)
NAME
reboot - Restarts the machine
SYNOPSIS
/usr/sbin/reboot [-dlnq]
DESCRIPTION
When the system is running and multiple users are logged in, use the shutdown -r command to perform a reboot operation. If no users are
logged in, use the reboot command.
The reboot command normally stops all running processes, syncs the disks, logs the reboot, and writes a shutdown entry in the login
accounting file, /var/adm/wtmp.
The reboot command uses the sync call to synchronize the disks, and to perform other shutdown activities such as resynchronizing the hard-
ware time-of-day clock. After these activities, the system reboots. By default, the system starts and the file systems are automatically
checked. If the start-up activities are successful, the system comes up in the default run-level.
You must have root privileges to use this command. Using the -n flag can result in file system damage.
FLAGS
Generates a crash dump of the system before halting it. Can be used with any of the other flags. Does not log the reboot using syslog
Does not sync the disks or log the reboot using syslog Performs a quick reboot without first shutting down running processes; does not log
the reboot using syslog
EXAMPLES
To enable the default reboot action, enter: reboot This command causes the system to stop all running processes, sync the disks, log the
shutdown, and perform other routine shutdown and reboot activities. To shut down the system without logging the reboot, enter: reboot -l
This command shuts down the system and performs all shutdown and reboot activities, except logging the shutdown. To reboot the system
abruptly, enter: reboot -q This command reboots the system abruptly without shutting down running processes.
FILES
Specifies the command path Specifies the login accounting file Specifies the path of the syslog daemon
RELATED INFORMATION
Commands: fsck(8), halt(8), init(8), savecore(8) shutdown(8), syslogd(8)
Functions: reboot(2), sync(2), syslog(3) delim off
reboot(8)