How to connect a 4TB G-Raid hard drive to a laptop? Post: 302496056

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Trying to copy old hard drive to new hard drive.

:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows...... dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/???????? Where I have the question marks is the problem. How do I find out what the...

2. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

3. UNIX for Dummies Questions & Answers

How to connect laptop to Unix system via Parallel port

Hi, I have been using a computer to keep track of inventory for my business. I am pretty sure it runs on Unix. In the back of the computer there is some sort of PCI card that has about 8 RJ-11 ports on it. I use that card to connect the Unix system to my 3 VT-220 terminals. I use a simple 6...

4. Slackware

installing slackware 10.2 on compaq laptop with Sansung HM121HI hard drive

Hi Guys, I'm trying to install slackware 10.2 on a on compaq laptop with Sansung HM121HI hard drive but I wonder what kernel should I use so it can recognize the had disk. Initially I've tried using sata.i and then try to use the fdisk utility to create the new partiotions but doesn't seem...

5. Solaris

Connect an External SCSI Hard Drive to Ultra 80

Guys, I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem. I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80. I connected it powered it up and at OK prompt did : boot -r system comes up and complains about not...

6. UNIX for Dummies Questions & Answers

RAID Drive

Hello, I have a machine that has software based RAID. One of the hard drives failed. The problem is that the old systems administrator created LVM and then RAID. My understanding is that RAID had to be created before and then the LVM's. Is there someway to install the new drive without loosing...

7. Ubuntu

Connect 2 laptops with RJ45 cable (Ubuntu 10.10 laptop with Windows 7 laptop)

Hi to all, I have the problem that a laptops with windows XP cannot startup even in safe mode nor using last good known configuration. I have a Ubuntu 10.10 Live CD and booting from it I can read the Hard Drive. I need to do a backup the Hard Drive from XP laptop and I want to connect this...

8. Solaris

Connect from Dell Laptop to SunBlade 100

Hi All I connect to my SunBlade using the keyboard/mouse provided by the sun. Now I would like to connect to it using my dell laptop running on Windows 7. I have connected the laptop to the SunBlade using just a one crossover 9-pin connector using the free/basic version of the terminal...

9. AIX

RAID 10 Failed Drive Swap

I am new to the AIX operating system and am seeking out some advice. We recently have had a drive go bad on our AIX server that is in a RAID 10 array. We have a replacement on the way. I was wondering what the correct steps are to swap out this drive. Does the server need to be powered off? Or can...

LEARN ABOUT DEBIAN

laptop_mode

LAPTOP_MODE(8)						      System Manager's Manual						    LAPTOP_MODE(8)

NAME

       /usr/sbin/laptop_mode - apply laptop mode settings

SYNOPSIS

       /usr/sbin/laptop_mode [ cmd ] [ force ]

DESCRIPTION

       This  manual  page  documents  briefly  the  /usr/sbin/laptop_mode command. laptop_mode is a program that applies the settings given in the
       /etc/laptop-mode/laptop-mode.conf configuration file. The primary use is to control the laptop mode feature included in Linux kernels  with
       versions  2.6.6	and  higher,  and  2.4.23  and	higher.  This feature increases battery life by letting your hard drive spin down. This is
       achieved by grouping disk write activity into "chunks" that are spaced at larger intervals than they normally would be. In addition to sup-
       porting	the  Linux  kernel's  laptop  mode  feature, /usr/sbin/laptop_mode also supports various power saving modules which are configured
       through configuration files in the /etc/laptop-mode/conf.d directory.

       It is not recommended to call /usr/sbin/laptop_mode directly to start or stop laptop mode, except in hardware event handlers. To apply  new
       configuration settings from laptop-mode.conf, call the laptop-mode service init script with the reload parameter.

COMMANDS

       Specify force as the second parameter to force laptop_mode to re-apply a state even if the computer is already in that state. These are the
       values that are allowed for cmd :

       auto	 Enable or disable laptop mode based on the current power state. Note that this will not do anything if  the  laptop-mode  service
		 has not been started!

       status	 Display a status report about everything that laptop_mode affects.

SEE ALSO

       laptop-mode.conf(8).

AUTHOR

       This  manual  page was written by Bart Samwel (bart@samwel.tk) for the Debian system (but may be used by others).  Permission is granted to
       copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later  version  published	by
       the Free Software Foundation.

       On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.

																    LAPTOP_MODE(8)