02-08-2011
That is the error I'm getting....bad geometry
---------- Post updated at 11:19 AM ---------- Previous update was at 11:09 AM ----------
I have a couple existing drives. One appears to not be the same exact model....now, when I use one that is the same model to copy from I am getting an I/O error, does the physical drive need to be named properly or is the name tied to the slot it is inserted in?
---------- Post updated at 11:20 AM ---------- Previous update was at 11:19 AM ----------
Quote:
Originally Posted by
citaylor
are the disks the same geometry (make, model, size, etc) ?
I have a couple existing drives. One appears to not be the same exact model....now, when I use one that is the same model to copy from I am getting an I/O error, does the physical drive need to be named properly or is the name tied to the slot it is inserted in?
9 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
What are the options on upgrading disk space in an Ultra 10 workstation? Sun states they are EIDE drives, are they standard or Sun specific?
Thanks (1 Reply)
Discussion started by: 98_1LE
1 Replies
2. Filesystems, Disks and Memory
I have a Sun Ultra 10/Solaris 2.7 with a differential SCSI card connected to a Supter DLt1 Tape Drive. When I boot the machine, and I do a probe-scsi-all in the very beginning of the boot process. It shows up correctly. If I wait for the boot process to proceed and then I do a probe-scsi-all, I get... (1 Reply)
Discussion started by: brv
1 Replies
3. UNIX for Dummies Questions & Answers
I have just started getting into unix and aquired a Sun Ultra 5 however the disk failed and I want to replace it with a spare maxtor 40Gb i have lying around. I need to partition and format the disk from its old windows format. I have looked up info on the format command in solaris 9 and I think i... (2 Replies)
Discussion started by: kalm
2 Replies
4. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
5. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
6. Solaris
Hi,
Can anyone suggest me any USB Hard Disk Drive which I can connect to Sun Fire V890 and take backup at a quick speed. A test with SolidState USB Hard Drive for backup work was taking writing at 2GB per hour for a 75GB backup.
Regards,
Tushar Kathe (1 Reply)
Discussion started by: tushar_kathe
1 Replies
7. Solaris
Guys,
I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem.
I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80.
I connected it powered it up and at OK prompt did : boot -r
system comes up and complains about not... (6 Replies)
Discussion started by: ajnabi
6 Replies
8. Solaris
Greetings!!
I've been tasked with decommissioning a group of older Sun servers. I have several SunFire 280r among them as well as some others. I have asolutely no experience with Sun systems and find myself in a bit of a pickle. I need two things
... someone to explain to me in grade... (5 Replies)
Discussion started by: Tenuous
5 Replies
9. Hardware
As the title suggests, I'm trying to install a second drive (really want an OS mirror) on a Sun Netra X1.
I've taken the spacer out, and had a go at with the drill-press so now I have a nice HDD tray. Have installed an IDE drive in the tray, plugged in the power and data cables that were... (0 Replies)
Discussion started by: Smiling Dragon
0 Replies
SPLIT(1) FSF SPLIT(1)
NAME
split - split a file into pieces
SYNOPSIS
split [OPTION] [INPUT [PREFIX]]
DESCRIPTION
Output fixed-size pieces of INPUT to PREFIXaa, PREFIXab, ...; default PREFIX is `x'. With no INPUT, or when INPUT is -, read standard
input.
Mandatory arguments to long options are mandatory for short options too.
-a, --suffix-length=N
use suffixes of length N (default 2)
-b, --bytes=SIZE
put SIZE bytes per output file
-C, --line-bytes=SIZE
put at most SIZE bytes of lines per output file
-l, --lines=NUMBER
put NUMBER lines per output file
--verbose
print a diagnostic to standard error just before each output file is opened
--help display this help and exit
--version
output version information and exit
SIZE may have a multiplier suffix: b for 512, k for 1K, m for 1 Meg.
AUTHOR
Written by Torbjorn Granlund and Richard M. Stallman.
REPORTING BUGS
Report bugs to <bug-coreutils@gnu.org>.
COPYRIGHT
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
LAR PURPOSE.
SEE ALSO
The full documentation for split is maintained as a Texinfo manual. If the info and split programs are properly installed at your site,
the command
info split
should give you access to the complete manual.
split (coreutils) 4.5.3 February 2003 SPLIT(1)