attempting to boot from cd rom Post: 302494402

9 More Discussions You Might Find Interesting

1. IP Networking

Error with ifconfig when attempting to switch to 10baseT

In Darwin, when typing "ifconfig en0 media 10baseT/UTP mediaopt half-duplex" I recieve the error message "ifconfig: SIOCSIFMEDIA: Operation not permitted". The same thing occurs when I sudo the command. Any suggestions? Thanks...

2. UNIX for Dummies Questions & Answers

attempting to break within function

Attempting to break from a case/esac paragraph while inside of a function. When executing the code below, entering the letter 'a', will prove that the directory exists, but the break command works for the if/fi, but not for the case/esac. So, in my example below, if an A is entered, the function...

3. Red Hat

attempting to install chkconfig 1.3.5

Hi there everyone, I'm using redhat 7.3 at the moment and am currently trying to install chkconfig-1.3.5-3.i386.rpm , but when I type this command: rpm -Uvh chkconfig-1.3.5-3.i386.rpm I get the following error: error: failed dependencies: chkconfig = 1.2.24 is needed by...

4. UNIX for Dummies Questions & Answers

Boot from cd-rom to access disk drives

Hello, I've booted a Digital Unix 4.0D system from cd-rom and I need to access the system's disk drives. I need to run the fixfdmn utility on the root domain so I need to create the root domain in /etc/fdmns. Could someone tell me how to access my system's disk drives after I've booted from...

5. Solaris

cd rom to dvd rom drive swap

Hello, I need to replace a cd rom drive with a dvd rom drive in a SunFire v120 running Solaris 8. My objective is to install Solaris 10 from dvd disc. Downloading Solaris 10 cd discs is not an option since I am in Baghdad, Iraq and connection speeds are horrible. So far, all I can get is power to...

6. Solaris

Ultra 5 will not boot from DVD ROM :(

Hi, I just got a new Ultra 5 and replaced the CD-ROM with an LG DVD-ROM (approved and listed in Sun HCL). Got the DVD-ROM installed to install Solaris 10. Im just learning and new to Solaris installation. When I insert a Solaris 10 DVD I see that it gets mounted and File Manager opens and...

7. Solaris

How to boot from Cd-rom in Server Sunfire v250?

Howto boot from Cd-rom in Server Sunfire v250? The system can't boot because the filesystem is corrupt. The system say: run manually fsck -F ufs /dev/rdsk/c0t0d0s5 But, I don't now how to make this. I tried use stop + a, but nothing hapend. Someone can I help?

8. SuSE

Attempting to use AutoYaST with SLES11SP2

We currently have a setup with SLES11SP1 where we have an AutoYaST ISO set up for automated network installs. I'm attempting to port this to SP2 to make new installs current, but I'm running into a few problems. The process seems the same, and after running mkisofs to build a new SP2 ISO the...

9. UNIX for Beginners Questions & Answers

Error attempting to run alsamixer

I am working on an embbeded system. On the system in /usr/bin there are a host of programs one of which is called alsamixer. I want to use this utility but whenever I try to run any alsamixer commands I get and error message: Error opening terminal: vt100 Anyone ever seen this error...

LEARN ABOUT BSD

installgrub

installgrub(1M) 														   installgrub(1M)

NAME

       installgrub - install GRUB in a disk partition or a floppy

SYNOPSIS

       /sbin/installgrub [-fm] stage1 stage2 raw-device

       The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.

       installgrub  installs  GRUB  stage  1  and  stage  2  files on the boot area of a disk partition. If you specify the -m option, installgrub
       installs the stage 1 file on the master boot sector of the disk.

       The installgrub command accepts the following options:

       -f

	   Suppresses interaction when overwriting the master boot sector.

       -m

	   Installs GRUB stage1 on the master boot sector interactively.

       The installgrub command accepts the following operands:

       stage1

	   The name of the GRUB stage 1 file.

       stage2

	   The name of the GRUB stage 2 file.

       raw-device

	   The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable.  For  disk
	   devices,  specify  the  slice  where  the  GRUB  menu  file	is  located.  (For Solaris it is the root slice.) For a floppy disk, it is
	   /dev/rdiskette.

       Example 1: Installing GRUB on a Hard Disk Slice

       The following command installs GRUB on a system where the root slice is c0d0s0:

       example# /sbin/installgrub /boot/grub/stage1 
		/boot/grub/stage2 /dev/rdsk/c0d0s0

       Example 2: Installing GRUB on a Floppy

       The following command installs GRUB on a formatted floppy:

       example# mount -F pcfs /dev/diskette /mnt
       # mkdir -p /mnt/boot/grub
       # cp /boot/grub/* /mnt/boot/grub
       # umount /mnt
       # cd /boot/grub
       # /sbin/installgrub stage1 stage2 /dev/rdiskette

       /boot/grub

	   Directory where GRUB files reside.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)

       Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
       boot the GRUB in the Solaris partition regardless of which fdisk partition is active.

								    24 May 2005 						   installgrub(1M)