02-04-2011
How to demonstrate network problems?
Hi,
I work on several Sun servers running Solaris (SunOS 5.10). All of these are Application Servers with a propietary software running on it.
It happens that some times (not regularly/deterministic and not so often, i.e. twice a month circa) we register what I think are network problems.
I say this because the messages appearing in alarm log from AS says:
* Can't connect to NE
* AS not available
* Connection to NE time out
Also it happened that after such alarms we had a huge number of frozen TCP connection in CLOSE_WAIT. Following this the File Descriptors for the process that handle TCP connection reached the system limit of 5120 and the AS started to transmit in UDP causing the failure of transactions since the other side didn't expect UDP packets.
Now this behavior (frozen CLOSE_WAIT) is fixed with a patch from the vendor but still remains the network (?) problems causing the alarms.
So since the first time it happened I have a fixed idea in my mind: network problems (Catalyst side to be clear).
Whatever it can be (traffic switch, downlink ...) this affect the traffic (SIP) of our AS.
The only problem is that the network guys says: from our point of view it's everything fine! Always, all the times it happens the problems!
At the end of the story:
What kind of data can I collect (and HOW!?) to DEMONSTRATE that it's a problem of the network (or the AS)?
Do you know a script or tool (not traffic affecting) that can monitor the described scenario?
Thanks you very much!
Regards,
Evan
9 More Discussions You Might Find Interesting
1. Windows & DOS: Issues & Discussions
Hello guys , i have a big big problem.
At the company that i work for there are like 4 pcs that are sending and recieving a lot of packets to the point that the network is down.
we think that it might be a virus, we run all the antivirus that you could posible think of and nothing so far.
... (2 Replies)
Discussion started by: josramon
2 Replies
2. SuSE
Hullo everyone,
I have recently installed SUSE 9.1 and attached it to my Network router (Actiontec 54Mbps Wireless DSL Gateway) but can't connect to the internet. It comes up with the following error message:
An error occurred while loading "http://www.yahoo.com":Timeout on server - connection... (2 Replies)
Discussion started by: sybella1
2 Replies
3. Slackware
I recently installed slackware 11 and have been very happy with it until I found out that some gnome related apps can cause gnome's network manager to alter the rc.init1 script by adding 3 lines to the script containing only the command, eth_up. This causes the script not to run properly and not... (1 Reply)
Discussion started by: djtrippin
1 Replies
4. Solaris
Hey. i have a SPARCstation 5 running solaris 8 and CDE,
i know this hardware is really old but its the only Solaris machine i can afford at this time, (Student) but im having a hard time getting it on the internet, im using a cable modem, andt DHCP IPv4, but i can`t get a connection, i have heard... (0 Replies)
Discussion started by: mads-nielsen
0 Replies
5. Solaris
Hi
I am trying to do a network install of Solaris 10 08_07 onto a Sunfire T2000. I have configured all my network-boot-arguments on the client server (named sundb1). I have installed my image of Solaris on my install server (sun1).
But when I try to install using
# boot net -s
I get the... (0 Replies)
Discussion started by: Bobby76
0 Replies
6. Solaris
recently I've setup a Solaris 10 box & am having network disruption, e.g. disconnects, interrupted pings, etc) when I
connect to it from another machine, how should I troubleshoot this !
The machine is a x86 box with 3 NICs (Differnet providors). The Current NIC is a Intel Gigabit, which is... (4 Replies)
Discussion started by: stevie_velvet
4 Replies
7. SCO
SCO unix 5.0.5 - Suddently network lost & has to be reboot. I try to stop TCP & start TCP. but no connection. Any idea about that.
thanks (8 Replies)
Discussion started by: ajantha
8 Replies
8. SCO
hello, i am new to unix and need support</SPAN></SPAN>
</SPAN></SPAN>The problem is:
I have a SCO 5.0.5 server, and has no local network access, I think my problem are the drivers for network card.
my network card is Kingston EtheRx PCI Fast Ethernet Adapter KNE120TX and already installed the... (9 Replies)
Discussion started by: daniel_cie
9 Replies
9. UNIX for Advanced & Expert Users
i need help, i will always accord mine if my scope allows me, help me in this one..
am running vmware 7.0 in winserver 2008 on a cq61-425el, my network driver is installed correctly. and my vmware network drivers have added as well (in the device manager section).
During installation i wasnt... (0 Replies)
Discussion started by: baitz
0 Replies
LEARN ABOUT X11R4
install-solaris
install-solaris(1M) install-solaris(1M)
NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)