dsw has it right. You can see the VLANs of virtual network adapters even if they are inside an etherchannel. My ent0 is on VLAN 10 and my ent1 is on VLAN 20. Here is an example from one of my boxes.
Code:
hostname:/:$ lsdev | grep ^ent
ent0 Available Virtual I/O Ethernet Adapter (l-lan)
ent1 Available Virtual I/O Ethernet Adapter (l-lan)
ent2 Available EtherChannel / IEEE 802.3ad Link Aggregation
hostname:/:$ entstat -d en2 | egrep "ETHERNET STATISTICS|Port VLAN ID"
ETHERNET STATISTICS (en2) :
ETHERNET STATISTICS (ent0) :
Port VLAN ID: 10
ETHERNET STATISTICS (ent1) :
Port VLAN ID: 20
hostname:/:$
hi,
i tried to configure an VLAN interface on my SF280 based on the documentation on docs.sun.com
# ifconfig eri1000 plumb up
Oct 21 13:41:26 cmsmaster ip: ip_rput_dlpi(eri1000): DL_ERROR_ACK for DL_ATTACH_REQ(11), errno 8, unix 0
ifconfig: SIOCSLIFNAME for ip: eri1000: no such interface... (2 Replies)
Hi all,
so server: FreeBSD 7.0 release,
interfaces on it DLINK DGE-528T with support of vlans :))
so first interface looks to LAN second to ISP.
I created vlan1 with id 1 and gave to it ip address and plug it in
tagged port of swith for vlan 1. so client from vlan1 reaches the server.
it... (2 Replies)
Hi all
My application is a monitoring application that monitors the incoming udp packet when ever required. When ever a particular source ip and port and dest ip and port is provided the filter will be framed based them. For eg,
char filterExpr;
filterExpr = "udp and src host 192.168.16.100... (0 Replies)
Hello. I want to Communicate 2 VLAN with router like this solution:
http://8pic.ir/images/83m0ouih8mmm9s1sfl56.jpg
For this purpose I'm configuring 2 Linux system as a switch and connect 4 host to them. Then a router is added to scenario.
The configuration of the switches is:
On DUT1(Linux):... (1 Reply)
Hi,
Is it possible to VLAN tag with a ce interface on Solaris 9? Link speed is gb.
ce:0:ce0:link_speed 1000
I have a ce0 interface I would need to have access to another VLAN as well as the one it's currently on.
What commands would I need to run?
Thanks.;) (2 Replies)
We have two hosts in same vlan with same route rules.
One of them is not able to connect to an outside IP while in another I get "failed: Connection timed out" while testing the connectivity through netcat.
I have tried mtr /traceroute and it gives me the same results.
Is there a netcat... (1 Reply)
Have 2 nics on physical system
net0 phys 1500 up --
net1 phys 1500 up --
1. I want to create a link aggregation with LACP enabled with above 2 nics
2. Create port-group(Like we create on ESXi) with VLAN-ID 2141
3. And assign this... (0 Replies)
Hi Guys,
Our lpars is currently running on 2 different vlans (20, 30). Now we have a requirement that vlan 30 needs to be change to vlan 31 at the same subnet. I'm not sure on what is the best approach for this or what change is involve on the AIX side.
This is our setup.
Network switch -... (5 Replies)
Hi Folks,
I am currently moving systems to a new environment, with some changes to the network requirements on the systems.
One of these changes is moving from just standard IPMP to using IPMP on top of a VLAN, I have used VLAN tagging befor without issue - however not with IPMP.
What I... (2 Replies)
Discussion started by: gull04
2 Replies
LEARN ABOUT OSX
dlcosmk
dlcosmk(7ipp) IP Quality of Service Modules dlcosmk(7ipp)NAME
dlcosmk - Data Layer Class of Service Marker
DESCRIPTION
The dlcosmk marker is an action module that is executed as a result of classifying or metering packets. It marks the packet with a user
priority defined by the IEEE 801.D standard. This feature is only possible on a VLAN device.
The 3-bit user priority is part of the 802.1Q VLAN header tag that is part of the ethernet header (carrying the IP packet).
STATISTICS
The dlcosmk module exports the following statistics through kstat:
Global statistics:
module: dlcosmk instance: <action id>
name: dlcosmk statistics class <action name>
crtime
snaptime
b_band <b_band value>
dl_max <dl_max value>
usr_pri <configured CoS>
npackets <number of packets>
epackets <number of packets in error>
ipackets <number of packets not processed>
FILES
/kernel/ipp/sparcv9/dlcosmk
64-bit module (SPARC only.)
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWqos |
+-----------------------------+-----------------------------+
SEE ALSO ipqosconf(1M), dscpmk(7IPP), flowacct(7IPP), ipqos(7IPP), ipgpc(7IPP), tokenmt(7IPP), tswtclmt(7IPP)SunOS 5.10 29 Sep 2004 dlcosmk(7ipp)