I've set up my own openSuse server and It's working perfectly, but... Some stuff has to be executed at boot, but it won't. I've tried boot.local and init.d but nothing works. This are the things that needs to be execute:
Code:
# Free the SSH port
killall xinetd
# Run subversion
svnserve -r /svn -d
# Start Trac (after Apache start)
tracd -p 30 --auth="*",/project/passwd,trac -e /project --daemonize
Hey !
I am running EWS-UX/V (Rel 4.2) on NEC EWS/4800/330 station and I am having problems rebooting my station : I am getting the following message on display : BOOT : PANIC : File size out of range.
According to user guide, this error is occuring when a file exceeding the limit and/or... (2 Replies)
When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error.
cannot find mis/krtld
boot error loading... (0 Replies)
Hello, firstly excuse for my poor english.
I have a busybox error when I try to run Debian 6. It's like Grub cannot find root (initramfs)
My system is:
- RAID0 with dmraid
- /boot ext2 (from moonOS installation --ubuntu based--)
- ext4 (moonOS wich have the Grub2 installation, where I... (0 Replies)
Hello,
I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error
" reboot and select proper Boot device or insert Boot media in select Boot device and press a key "
I have tried CD and... (0 Replies)
I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD... (9 Replies)
Hello!
Please, what ELSE do we BOOT except of operating systems?
Can someone list me at least some programs which we boot and are not OSs?
Many thanks¨! (1 Reply)
for solaris 11, how does one change the run level at boot from 3 to 2?
i checked "/etc/inittab" file where i usually change it in other *nix but it seems solaris is not using it. (1 Reply)
Discussion started by: badbanana
1 Replies
LEARN ABOUT FREEBSD
boot.config
BOOT.CONFIG(5) BSD File Formats Manual BOOT.CONFIG(5)NAME
boot.config -- Configuration file for the boot blocks
DESCRIPTION
The boot.config file contains options for the FreeBSD boot block code.
When the FreeBSD boot loader runs, it searches the ``a'' slice of the boot partition for a boot.config file (as a result, slices which are
missing an ``a'' partition require user intervention during the boot process). If the boot.config file is found, its contents are used as
the default configuration options for the boot block code and are echoed to the system console.
A valid format of this file is to put BIOS drive number, a controller type, a unit number, a partition, a kernel file name, and any other
valid boot(8) option on a single line, as it is done at the ``boot:'' prompt.
The options related to the boot image selection described below and all the other options available for boot.config are documented in detail
in the boot(8) manual page.
FILES
/boot.config parameters for the boot blocks (optional)
EXAMPLES
The command:
# echo "-P" > /boot.config
will activate the serial console of FreeBSD.
The command:
# echo "1:ad(1,a)/boot/loader" > /boot.config
will instruct the second stage of boot(8) on the first disk to boot with the third boot(8) stage from the second disk.
The command:
# echo "1:ad(1,a)/boot/loader -P" > /boot.config
will do both of the above.
SEE ALSO boot(8), loader(8)AUTHORS
This manual page was written by Daniel Gerzo <danger@FreeBSD.org>.
BSD May 13, 2007 BSD
01-28-2011
!