Can EtherChannel be a redundancy config? Post: 302491598

9 More Discussions You Might Find Interesting

1. AIX

EtherChannel network redundance problem

Problem description: On the condition of EtherChannel function of AIX, when the data exchange between the nodes on the network, there sometimes lost datat packets and cause the application failed. Once we deconfig EtherChannel and use the single adapter configuration, the application works...

2. UNIX for Advanced & Expert Users

Port Redundancy

Dears, I have server has two port's(Enet0,Enet1) what I want as follows: Make the two port's has same IP address where, if the port Enet0 became down automaticly Enet1 become up :confused: . Amen

3. AIX

Problem with Etherchannel

I'm trying to configure Etherchannel on AIX 5.3 and I'm having some problems. I am aggregating both of the onboard NIC's (ent0 and ent1) into a new adapter ent2 for failover reasons obviously. At first I was experiencing a problem where about 50% of all my packets would be dropped. Then after...

4. AIX

AIX / Etherchannel / VLANs

I have 1 AIX server, 4 dual ported fiber attached ethernet cards and 4 VLANS coming in. Is it possible to present those 8 ports as 1 IP address using etherchannel? Thanks.

5. AIX

Pb Etherchannel/deconnexion port reseau

Hello, On a partition with AIX 5300-11-01-0944. 1 etherchannel ent9 with aggregation ent3/ent7. # lsdev |grep ent ... ent3 Available 07-01 4-Port 10/100/1000 Base-TX PCI-Express Adapter (14106803) ... ent7 Available 0A-01 4-Port 10/100/1000 Base-TX PCI-Express...

6. AIX

EtherChannel interface ping pelicularity

I have few AIX servers in my data center, which have their EtherChannel configured to have a fat pipe (active/active) and a nagios server to monitor the server uptimes. Nagios server pings every server in the data center and we have pretty much every known unix flavor in this data center. When...

7. AIX

Aggregated Etherchannel

Hi, I have a AIX5.3 P6-520 with 8x1Gb Ethernet ports with possible connections to 2 CISCO 2960 switches. I can create 8023ad Etherchannels which work correctly with the switches (I have set up for LACP passive and a valid channels) But can create 2x 8023ad 4Gb Etherchannels with no backups....

8. AIX

Etherchannel failover testing

Hi Guys, I am trying to test an etherchannel failover and switchback. I did failover from primary to backup adapter, but now I am not able to switch it back to primary. phcxxxxx:/ > entstat -d ent4 | grep Active Active channel: backup adapter ...

9. AIX

PowerVM SEA etherchannel performance ?

Hello, POWER7 machine. 4 x 1Gbit port ethernet adapter is dedicated to vios. 8023ad etherchannel is created using those 4 ports. Etherchannel adapter is shared to lpars using SEA. If I test network performance directly from vios partition (using iperf) I'm geting nice 4Gbit throughput. But if...

LEARN ABOUT SUSE

ocf_heartbeat_nfsserver

OCF_HEARTBEAT_NFSSER(7) 					OCF resource agents					   OCF_HEARTBEAT_NFSSER(7)

NAME

       ocf_heartbeat_nfsserver - Manages an NFS server

SYNOPSIS

       nfsserver [start | stop | monitor | meta-data | validate-all]

DESCRIPTION

       Nfsserver helps to manage the Linux nfs server as a failover-able resource in Linux-HA. It depends on Linux specific NFS implementation
       details, so is considered not portable to other platforms yet.

SUPPORTED PARAMETERS

       nfs_init_script
	   The default init script shipped with the Linux distro. The nfsserver resource agent offloads the start/stop/monitor work to the init
	   script because the procedure to start/stop/monitor nfsserver varies on different Linux distro. (optional, string, default
	   /etc/init.d/nfsserver)

       nfs_notify_cmd
	   The tool to send out NSM reboot notification. Failover of nfsserver can be considered as rebooting to different machines. The nfsserver
	   resource agent use this command to notify all clients about the happening of failover. (optional, string, default /usr/sbin/sm-notify)

       nfs_shared_infodir
	   The nfsserver resource agent will save nfs related information in this specific directory. And this directory must be able to fail-over
	   before nfsserver itself. (required, string, no default)

       nfs_ip
	   The floating IP address used to access the nfs service (required, string, no default)

SUPPORTED ACTIONS

       This resource agent supports the following actions (operations):

       start
	   Starts the resource. Suggested minimum timeout: 40.

       stop
	   Stops the resource. Suggested minimum timeout: 20s.

       monitor
	   Performs a detailed status check. Suggested minimum timeout: 20s. Suggested interval: 10.

       meta-data
	   Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5.

       validate-all
	   Performs a validation of the resource configuration. Suggested minimum timeout: 30.

EXAMPLE

       The following is an example configuration for a nfsserver resource using the crm(8) shell:

	   primitive example_nfsserver ocf:heartbeat:nfsserver 
	     params 
	       nfs_shared_infodir=string 
	       nfs_ip=string 
	     op monitor depth="0" timeout="20s" interval="10"

SEE ALSO

       http://www.linux-ha.org/wiki/nfsserver_(resource_agent)

AUTHOR

       Linux-HA contributors (see the resource agent source for information about individual authors)

resource-agents 1.0.3						    07/05/2010						   OCF_HEARTBEAT_NFSSER(7)