help writing pci firmware Post: 302490397

10 More Discussions You Might Find Interesting

1. BSD

WLAN PCI Cards

Hi! I just wanted to know what network cards are supported in FreeBSD. I have looked at the list of supported cards but I can't find any of them in the stores. Is the list not updated, I would really preciate info about where (in EU, Sweden) I can buy them. /Peter

2. Solaris

rs232 pci-card

hello mates, do you know a manufactor for rs232 serial pci cards for the sparc architecture? it seems that there is no original product from sun for that purpose. strange, isn't it? problem is that i have a V250 with only one db9 rs232 serial port, and i need it for a modem connection, but i also...

3. Solaris

Pci Id

How do I get the PCI ID for my Realtek adapter? It's a Solaris x86 installation.

4. UNIX for Dummies Questions & Answers

bad pci slot?

Hi, im having a problem installing my pci wireless card. Im using knoppix, but my problem is with the mobo i think. im using an older laptop, toshiba satellite 2540 and when i plug in the card i get lights on sometimes. this means its getting power right. so then to install the card into the...

5. Solaris

How to look for open pci slots

I'm looking for open PCI slots in our array of sun boxes. I need help on how to distinguish if there's an open slot or not using prtdiag and prtconf. Is there a better tool for this? TIA. Here's my prtdiag -v | grep pci: pci 66 PCI5 SUNW,qlc-pci1077,2312 (scsi-+ ...

6. Linux

PCI Card recognized

I installed PCI Card HP SC44Ge - SAS1068E on my linux CentOS 5.4 is there a way to find out if the PCI is properly installed and recognized by linux. lspci is enough? just to add that PCI card is connected to a tape... also how can I find out driver and firmware version? thanks a...

7. Solaris

available PCI slots on v440

How do I find any available PCI slots on a v440? When I run prtconf, I get the following output? But I am not able to make out whether all the PCI slots are used. ================================= IO Devices ================================= Bus Freq Brd Type MHz Slot ...

8. Slackware

converting mouse to pci

Need to free up a usb port for webcam. What does xorg.conf look like in order to work if I move mouse to PCI port via a converter plug?

9. Hardware

Lspci: PCI Devices?

hey everyone, just a general question. I did an lspci on my home computer, and it got me thinking... When I hear pci..I think of the physical slots on your motherboard. usually beige in color.. But the list returned to me is of atleast 20 items. None of which, (besides the graphics card) is...

10. Hardware

Could USB ever take over PCI

Internally speaking, for your motherboard bus. Would it be possible for a usb standard to be used in place of the PCI or PCIe bus that is now nearly standard on all PC's? If not, why wouldn't this work?

LEARN ABOUT REDHAT

pcitweak

PCITWEAK(1)						      General Commands Manual						       PCITWEAK(1)

NAME

       pcitweak - read/write PCI config space

SYNOPSIS

       pcitweak -l
       pcitweak -r PCI-ID [-b|-h] offset
       pcitweak -w PCI-ID [-b|-h] offset value

DESCRIPTION

       Pcitweak  is  a utility that can be used to examine or change registers in the PCI configuration space.	On most platfoms pcitweak can only
       be run by the root user.

OPTIONS

       -l      Probe the PCI buses and print a line for each detected device.  Each line contains the  bus  location  (bus:device:function),  chip
	       vendor/device, card (subsystem) vendor/card, revision, class and header type.  All values printed are in hexadecimal.

       -r PCI-ID
	       Read  the PCI configuration space register at offset for the PCI device at bus location PCI-ID.	PCI-ID should be given in the form
	       bus:device:function, with each value in hexadecimal.  By default, a 32-bit register is read.

       -w PCI-ID
	       Write value to the PCI configuration space register at offset for the PCI device at bus location PCI-ID.  PCI-ID should be given in
	       the form bus:device:function, with each value in hexadecimal.  By default, a 32-bit register is written.

       -b      Read or write an 8-bit value (byte).

       -h      Read or write a 16-bit value (halfword).

SEE ALSO

       scanpci(1)

AUTHORS

       David Dawes (dawes@xfree86.org).

XFree86 						       Version Version 4.3.0						       PCITWEAK(1)