FENCE_AGENT(8)						      System Manager's Manual						    FENCE_AGENT(8)

NAME

       fence_bladecenter - Fence agent for IBM BladeCenter

DESCRIPTION

       fence_bladecenter is an I/O Fencing agent which can be used with IBM Bladecenters with recent enough firmware that includes telnet support.
       It logs into a Brocade chasis via telnet or ssh and uses the command line interface to power on and off blades.

       fence_bladecenter accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent.
       fence_bladecenter  can  be  run	by  itself  with  command line options.  This is useful for testing and for turning outlets on or off from
       scripts.

       Vendor URL: http://www.ibm.com

PARAMETERS


       -o, --action=<action>
	      Fencing Action (Default Value: reboot)

       -a, --ip=<ip>
	      IP Address or Hostname This parameter is always required.

       -l, --username=<name>
	      Login Name This parameter is always required.

       -p, --password=<password>
	      Login password or passphrase

       -S, --password-script=<script>
	      Script to retrieve password

       -c, --command-prompt=<prompt>
	      Force command prompt (Default Value: system>)

       -x, --ssh
	      SSH connection

       -n, --plug=<id>
	      Physical plug number or name of virtual machine This parameter is always required.

       -k, --identity-file=<filename>
	      Identity file for ssh

       -4, --inet4-only
	      Forces agent to use IPv4 addresses only

       -6, --inet6-only
	      Forces agent to use IPv6 addresses only

       -u, --ipport=<port>
	      TCP port to use for connection with device

       -v, --verbose
	      Verbose mode

       -D, --debug-file=<debugfile>
	      Write debug information to given file

       -V, --version
	      Display version information and exit

       -h, --help
	      Display help and exit

       -C, --separator=<char>
	      Separator for CSV created by operation list (Default Value: ,)

       --power-timeout
	      Test X seconds for status change after ON/OFF (Default Value: 20)

       --shell-timeout
	      Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --login-timeout
	      Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-wait
	      Wait X seconds after issuing ON/OFF (Default Value: 10)

       --missing-as-off
	      Missing port returns OFF instead of failure

       --delay
	      Wait X seconds before fencing is started (Default Value: 0)

       --retry-on
	      Count of attempts to retry power on (Default Value: 1)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.

       monitor
	      Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does  not  support  more).

       metadata
	       The operational behavior of this is not known.

STDIN PARAMETERS


       action Fencing Action (Default Value: reboot)

       ipaddr IP Address or Hostname This parameter is always required.

       login  Login Name This parameter is always required.

       passwd Login password or passphrase

       passwd_script
	      Script to retrieve password

       cmd_prompt
	      Force command prompt (Default Value: system>)

       secure SSH connection

       port   Physical plug number or name of virtual machine This parameter is always required.

       identity_file
	      Identity file for ssh

       inet4_only
	      Forces agent to use IPv4 addresses only

       inet6_only
	      Forces agent to use IPv6 addresses only

       ipport TCP port to use for connection with device

       verbose
	      Verbose mode

       debug  Write debug information to given file

       version
	      Display version information and exit

       help   Display help and exit

       separator
	      Separator for CSV created by operation list (Default Value: ,)

       power_timeout
	      Test X seconds for status change after ON/OFF (Default Value: 20)

       shell_timeout
	      Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       login_timeout
	      Wait X seconds for cmd prompt after login (Default Value: 5)

       power_wait
	      Wait X seconds after issuing ON/OFF (Default Value: 10)

       missing_as_off
	      Missing port returns OFF instead of failure

       delay  Wait X seconds before fencing is started (Default Value: 0)

       retry_on
	      Count of attempts to retry power on (Default Value: 1)

fence_bladecenter (Fence Agent) 				    2009-10-20							    FENCE_AGENT(8)