Unable to login Solaris 10 Sparc - Data Access Error Post: 302489945

10 More Discussions You Might Find Interesting

1. Solaris

solaris 8 hangs and data access error on reboot

Hi using solaris 5.8 on UltraSPARC-IIi 360MHz. I know it is an old hardware but similiar hardware is running fine. here is the issue, System booted : works okay for some time then display was hung so system was rebooted ..it gave data access error. again rebooted and it came up...

2. Solaris

Unable to access open solaris across the network.

Hi Everyone, I have installed open solaris 10 on one of the x86 machines available but inspite of configuring the IP i am unable to access the machine through the network. Can anyone please help me wih the settings required to access the machine across the network.Its really Urg..Any help is...

3. Solaris

Unable to login using ssh,telnet onto my solaris machine with solaris 10 installed

Hi, I am unable to login into my terminal hosting Solaris 10 and get the below error message "Server refused to allocate pty ld.so.1: sh: fatal: libc.so.1: open failed: No such file or directory " Is there anyways i can get into my machine and what kind of changes are required to be...

4. UNIX for Dummies Questions & Answers

can I emulate solaris/sparc on virtualbox? Or other emulator to run solaris for sparc in my win7 PC?

Hi Gurus can I emulate solaris/sparc on virtualbox? Or other emulator to run solaris for sparc in my win7 PC? regards, Israel.

5. Solaris

Unable to access serial port from non-global solaris zone on netra 240

I am trying to use a serial communications device that is connected to /dev/ttyb on a netra 240 server. This is a solaris zone configuration using solaris 10 0910. I am able to access /dev/ttyb from the global zone but not throught he non-global zone. I have enabled all of the tty devices in my...

6. Solaris

unable to login Solaris 10

I have inherited a solaris 10 server. I went to log into it the other day over the console connection, and after sucessfully entering the password, I was booted back to the login prompt with no errors visible. If I enter an incorect password, the console displays 'incorrect password' and kicks...

7. Red Hat

Unable to access NFS share on Solaris Server from Linux client

Hi, I am trying to access a NFS shared directory on Solaris 10 Server from a client which is RHEL 4 Server. On the NFS Server, in /etc/dfs/, I added following line to dfstab file. share -F nfs -o rw /var/share & then ran the following svcadm -v enable -r...

8. Solaris

Solaris SPARC boot error

Hi Admins, When i tried to boot the system from ALOM console i am getting below error and not sure what caused this error. Btw the machine is running on Solaris SPARC 10. Can you shed some light on this? {b} ok boot -sv SC Alert: Host System has Reset SC Alert: Host system has...

9. Solaris

Newly relabelled disc unable to initialize to Solaris 8 login - please help

We are having a problem with initializing Solaris 8 installed on a Sunblade 1500 after having cloned the hard disc. (The cloning process was done in a windows environment. Not a UNIX environment.) Immediately after the cloning process neither hard disc would boot until the format label...

10. Solaris

Solaris 10 boot problem - ERROR: Last Trap: Fast Data Access MMU Miss

Hello, We have a T5140 server with Solaris 10 and its suddenly throwing "segmentation core" when I login into the server and not showing any output for commands like df, mount etc. so I had to reboot the server to fix this issue. Please note that there's no boot disk mirroring. But...

LEARN ABOUT OSX

installboot

installboot(1M) 														   installboot(1M)

NAME

       installboot - install bootblocks in a disk partition

SYNOPSIS

       installboot bootblk raw-disk-device

       The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.

       The  ufs  boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
       found using the -i option of uname(1).

       The installboot utility is a SPARC only program. It is not supported on the  architecture.  users should use installgrub(1M) instead.

       bootblk	       The name of the bootblock code.

       raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is  read-
		       able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.

       Example 1: Installing UFS Boot Block

       To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:

	      example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk 
		   /dev/rdsk/c1t0d0s0

       /usr/platform/platform-name/lib/fs/ufs

	   directory where ufs boot objects reside.

       /platform/platform-name/ufsboot

	   second level program to boot from a disk or CD

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

       od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)

WARNINGS

       The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.

								    11 Apr 2005 						   installboot(1M)