|
|
Sponsored Content
Top Forums
UNIX for Dummies Questions & Answers
View tape backup files on RHEL5 Operating System
Post 302489341 by optimum on Thursday 20th of January 2011 08:47:24 AM
01-20-2011
view tape backup on RHEL5
Tnx for the post.
I did not use any software to write to the tape. I made use of the tar command to write to the tape on AIX Server.
The backup command used was "tar cvf /dev/rmt2 /mybackup
Now viewing the tape from the RHEL5 (x86) server gives input /output error using the command: tar tvf optimum@10.0.0.1: /dev/rmt2
Error: Cannot open: Input/output error
tar:Error is not recoverable: exiting now
where 10.0.0.1 is the IP address of the AIX server
Note not real IP address)
I also tried the following command: tar tvf /dev/rmt2
Error: tar: Error is not recoverable: exiting now
Hope to get the feedback soonest. Tnx
I did not use any software to write to the tape. I made use of the tar command to write to the tape on AIX Server.
The backup command used was "tar cvf /dev/rmt2 /mybackup
Now viewing the tape from the RHEL5 (x86) server gives input /output error using the command: tar tvf optimum@10.0.0.1: /dev/rmt2
Error: Cannot open: Input/output error
tar:Error is not recoverable: exiting now
where 10.0.0.1 is the IP address of the AIX server
Note not real IP address) I also tried the following command: tar tvf /dev/rmt2
Error: tar: Error is not recoverable: exiting now
Hope to get the feedback soonest. Tnx
|
|
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I AM A NEWBIE PLEASE HELP!!
IF YOU HAVE KSH YOU SHOULD USE A TAR COMMAND
HOW DO YOU VIEW A TAPE WITH JUST AN SH.
MY MIS CRASHED AND I KEEP GETTING AN ERROR MESSAGE
CANNOT FORK: TOO MANY PROCESSES
:confused: (3 Replies)
Discussion started by: NOT A CLUE
3 Replies
2. UNIX for Dummies Questions & Answers
Hi there: I'm new here
Can anyone help me:
I have DS15 Alpha server : Unix 5.1B
Now i need to connect a DLVT VS80 1U Rackmount Tape Drive unit.
What is the exact comman to mount the DLTape IV??
How do i make backuo @ copy file to the tape?
Thanx to all (0 Replies)
Discussion started by: ayzeayem
0 Replies
3. UNIX for Dummies Questions & Answers
Hi,
I performed backup on tape and I want to append more files to my previous backup on the same backup tape. But before I do that I need to know the backup file size of the first backup I performed so that I know the available size on the backup tape. Can someone help me what command I will use... (0 Replies)
Discussion started by: ayhanne
0 Replies
4. UNIX for Advanced & Expert Users
hi all
Please may you help.
I want to put my unix application backup files using tar cv8 * from a specific folder e.g /u1/sage
With new tapes SONY 4mm-DL 90m i can do it with no problem at all. Now I have run out of tapes and I need to use the same kind but they were once used to back... (5 Replies)
Discussion started by: isaac
5 Replies
5. UNIX for Dummies Questions & Answers
hi,
Recently, I had receive one system. it's run on the unix tru64 server.
I looking some log files when i know don't work few months age system backup to tape.
Below error:
INFO:Tape backups to tape tape0 starting
for backup list:
slot2:/disk4
Backup Command Variable... (0 Replies)
Discussion started by: Tlg13team
0 Replies
6. AIX
Hi,
Can anyone tell how to list files in a AIX 3.2 mksysb backup tape.
Thanks!
Victor Cheung (4 Replies)
Discussion started by: victorcheung
4 Replies
7. Red Hat
I'm using tar and so far so good, but how can I view ALL files without having to fast forward and rewind the tape? Let's say I append 100 files onto the tape. Having to fast forward 100 times until I find the file I want is kinda tedious. (3 Replies)
Discussion started by: sdotsen
3 Replies
8. Solaris
Hi,
I want to take backup of files older than 20 days from a directory onto a tape drive on remote machine on Solaris.
The files are of format abc-20100301000000.gz on my local machine.
I know the below commands for searching files older than x days and command for backup procedure.
solar1 #... (7 Replies)
Discussion started by: jyothi_wipro
7 Replies
9. AIX
I have an AIX server with a tape Library residing on it. I intend to restore the data backed up to the tape on Red Hat Enterprise Linux 5.
First , i would want to view the contents of the tape on RHEL 5(x86) but seems to be giving an input output error.
I observed that if i backup to tape on... (1 Reply)
Discussion started by: optimum
1 Replies
10. Solaris
Hi Guys,
I want to take backup of a ZFS file system on tape drive.
Can anybody help me with this?
Thanks,
Pras (0 Replies)
Discussion started by: prashant2507198
0 Replies
LEARN ABOUT DEBIAN
dds-dd
dds-dd(1) General Commands Manual dds-dd(1) NAME
dds-dd - tool to read a dds device. SYNOPSIS
dds-dd [ -f device ] DESCRIPTION
dds-dd reads a dds tape devices (DAT). Every block is read and written to stdout. A tape with unknown block size or blocks of different size can be read. The default device is /dev/rmt0, which may be overridden with the environment variable TAPE, which in turn may be overridden with the -f device option. The device must be a character special file. OPTIONS
-f device Device of the tape archive (default is /dev/rmt0). Must be a character special file connected to a dds tape device. -V,--version Print the version number of mt-dds to stderr and exit immediately. --help print some screens of online help with examples through a pager and exit immediately. EXAMPLES
Example: Read the tape and make a listing: dds-dd | tar ft - Example: Read the tape and make a listing: dds-dd | cpio -it ENVIRONMENT
The environment variable TAPE overrides the default tape device /dev/rmt0. SEE ALSO dds2tar(1), dds2index(1), mt(1), tar(1) HISTORY
This program was created to use it in conjunction with dds2tar. AUTHOR
J"org Weule (weule@cs.uni-duesseldorf.de), Phone +49 211 751409. This software is available at ftp.uni-duesseldorf.de:/pub/unix/apollo 2.4 dds-dd(1)