Hi all,
yes this is a linux question :) but also a LVM question.
Some time ago, I saw an posting, LVM Version 1.X is abe to handle multiple physical pathes to a disk with using md devices. Is this right ?
Now I am planing to create a san and want use linux fileservers with LVM v1.X and most... (1 Reply)
I'm setting up a CentOS 5 server that will be connected to an HP EVA4000. My previous experience is with an HP VA7400 and HP-UX. In HP-UX I can add "alternate paths" to a volume group in order to have redundant paths to the SAN via dual fiber channel HBAs just by either adding them with... (3 Replies)
Not real Linux expert but here is the problem.
Shutdown this machine and then it would not reboot.
From everything I can tell it looks like the journal file in the logical volume is corrupted. I have tried everything I can think of to get the volume mounted.
Anybody have any ideas on how... (19 Replies)
I've three partitions on /dev/sda: sda1, sda2 sda3. There is FREE space between sda2 and sda3 and sda3 ends on the last sector. sda2 and sda3 have the same number of sectors allocated and so are the exact same size.
/dev/sda2 is already part of the VG VolGroup. However, what puzzles me is that... (0 Replies)
Dear all,
I found, in Slackware, without using physical/raw partition Linux can be booted & OS will be in LVM but in general people use /boot from physical/raw partition to boot the RedHat linux System & root and other file systems would be in LVM. My doubt is how a system will be booted without... (5 Replies)
My root file system is of type LVM. i wanna shrink it but unable to do so.
When i give the below command:
resize2fs /dev/mapper/VolGroup00-VolLog00 10000M
it messages that online shrink can't can't be done as the logical volume is mounted on /. i switched to single user mode by giving command:... (2 Replies)
Hi,
a little while ago, one of the GPT Partitioned hard disk had gone faulty in a Mirror RAID and is now successfully replaced.
here is how I did that.
1) created identical partition table on the new disk.
2) attached the mirrors using md commands.
The whole procedure is given... (5 Replies)
Hi,
I need a suggesstion i have 2 disk if i installed OS / root partition by making Lvm in one disk and data in other disk also with the lvm, means 2 different lvms.
Is making LVM partition for OS disk will the performacne will be good?
Can i make 2 different lvm one is for OS and other for... (1 Reply)
Discussion started by: Rahulne25
1 Replies
LEARN ABOUT DEBIAN
kpartx
KPARTX(8) Linux Administrator's Manual KPARTX(8)NAME
kpartx - Create device maps from partition tables
SYNOPSIS
kpartx [-a | -d | -l] [-v] wholedisk
DESCRIPTION
This tool, derived from util-linux' partx, reads partition tables on specified device and create device maps over partitions segments
detected. It is called from hotplug upon device maps creation and deletion.
OPTIONS -a Add partition mappings
-r Readonly partition mappings
-r Read-only partition mappings
-d Delete partition mappings
-u Update partition mappings
-l List partition mappings that would be added -a
-p set device name-partition number delimiter
-f force creation of mappings; overrides 'no_partitions' feature
-g force GUID partition table (GPT)
-v Operate verbosely
-s Sync mode. Don't return until the partitions are created
EXAMPLE
To mount all the partitions in a raw disk image:
kpartx -av disk.img
This will output lines such as:
loop3p1 : 0 20964762 /dev/loop3 63
The loop3p1 is the name of a device file under /dev/mapper which you can use to access the partition, for example to fsck it:
fsck /dev/mapper/loop3p1
When you're done, you need to remove the devices:
kpartx -d disk.img
SEE ALSO multipath(8)multipathd(8)hotplug(8)AUTHORS
This man page was assembled By Patrick Caulfield for the Debian project. From documentation provided by the multipath author Christophe
Varoqui, <christophe.varoqui@opensvc.com> and others.
July 2006 KPARTX(8)