You need to specify either static or dynamic rule for updating routing tables so please look at
If you run IPv4 on your corporate network you must enable intranet forwarding using this service
svc:/network/routing/legacy-routing:ipv4
If you want use IPfilter to redirect traffic from some network card to other you can use rule set like this one
But to get more secure connection you can redirect by some port and include some encryption if your data must be classified.
hi,
below is the situation:
my server is in 128.10.200.xxx network.
i have a solaris computer running in a subnet. this computer got 2 nic card.
1 is 172.18.198.xxx , another 1 is 10.100.xxx.11
there is a machine stick with this computer, ip is 10.100.xxx.12
so, 10.100.xxx.11 and... (3 Replies)
Does anyone know how to delete a an ip off the routing table ? i tried route delete 10.0.0.0 and gateway but it still comes back. i have 2 zones sharing one interface. help... (4 Replies)
hi all,
how do i make sure that the new routing should take effect on the os memory right away? what should i run after i add all the new "route add ....".
I have an example below:
bash-2.03# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface... (1 Reply)
Hi,
I got problem of Sun Solaris 8 routing.
IP of SunA is 10.16.64.164, and have routing table:
10.16.64.0 10.16.64.164 U 1 19236 bge1
10.6.0.0 10.6.0.3 U 1 16534 bge0
224.0.0.0 10.6.0.3 U 1 ... (4 Replies)
I have a SUN ultra 5 machine running Solaris 6. it has two ethernet interfaces qe0 192.168.0.111 and qe1 192.168.1.111
the two subnets are 192.168.0.111 255.255.255.0
192.168.1.111 255.255.255.0
the specified routes are
add route -net 192.168.0.0 255.255.255.0 192.168.0.111
add route... (3 Replies)
Hi everyone,
Hopefully there is someone here that can help me with the problem I got.
At my office I have 1 ubuntu firewall/gateway and several networks.
On the firewall/gateway I have three network cards, one for internet, one for network 192.168.100.0 and one for network 172.20.1.0
We... (0 Replies)
Hello All,
Problem is that redundancy doesn't work, probably a routing issue I need to get sorted out When 172.29.11.x net is down, neither node3 nor node4 is trying 172.29.12.x network,The problem lies in network 172.29.13.x
if 172.29.11.x network is down, node3/node4 should route to... (6 Replies)
Discussion started by: nadeemahmed
6 Replies
LEARN ABOUT X11R4
tc-route
Route classifier in tc(8) Linux Route classifier in tc(8)NAME
route - route traffic control filter
SYNOPSIS
tc filter ... route [ from REALM | fromif TAG ] [ to REALM ] [ classid CLASSID ] [ action ACTION_SPEC ]
DESCRIPTION
Match packets based on routing table entries. This filter centers around the possibility to assign a realm to routing table entries. For
any packet to be classified by this filter, a routing table lookup is performed and the returned realm is used to decide on whether the
packet is a match or not.
OPTIONS
action ACTION_SPEC
Apply an action from the generic actions framework on matching packets.
classid CLASSID
Push matching packets into the class identified by CLASSID.
from REALM
fromif TAG
Perform source route lookups. TAG is the name of an interface which must be present on the system at the time of tc invocation.
to REALM
Match if normal (i.e., destination) routing returns the given REALM.
EXAMPLES
Consider the subnet 192.168.2.0/24 being attached to eth0:
ip route add 192.168.2.0/24 dev eth0 realm 2
The following route filter will then match packets from that subnet:
tc filter add ... route from 2 classid 1:2
and pass packets on to class 1:2.
NOTES
Due to implementation details, realm values must be in a range from 0 to 255, inclusive. Alternatively, a verbose name defined in
/etc/iproute2/rt_realms may be given instead.
SEE ALSO tc(8), ip-route(8)iproute2 21 Oct 2015 Route classifier in tc(8)