Sponsored Content
Operating Systems Solaris solaris routing between two networks Post 302487637 by busyboy on Thursday 13th of January 2011 05:00:20 AM
Old 01-13-2011
enable what...

Code:
# routeadm -u -e ipv4-forwarding
# routeadm
              Configuration   Current              Current
                     Option   Configuration        System State
---------------------------------------------------------------
               IPv4 routing   disabled             disabled
               IPv6 routing   disabled             disabled
            IPv4 forwarding   enabled              enabled
            IPv6 forwarding   disabled             disabled

           Routing services   "route:default ripng:default"

Routing daemons:

                      STATE   FMRI
                   disabled   svc:/network/routing/legacy-routing:ipv4
                   disabled   svc:/network/routing/legacy-routing:ipv6
                   disabled   svc:/network/routing/ndp:default
                   disabled   svc:/network/routing/rdisc:default
                   disabled   svc:/network/routing/ripng:default
                   disabled   svc:/network/routing/ripng:quagga
                   disabled   svc:/network/routing/route:default
                   disabled   svc:/network/routing/zebra:quagga
                   disabled   svc:/network/routing/rip:quagga
                   disabled   svc:/network/routing/ospf:quagga
                   disabled   svc:/network/routing/ospf6:quagga
                   disabled   svc:/network/routing/bgp:quagga

 

8 More Discussions You Might Find Interesting

1. IP Networking

routing problem in solaris

hi, below is the situation: my server is in 128.10.200.xxx network. i have a solaris computer running in a subnet. this computer got 2 nic card. 1 is 172.18.198.xxx , another 1 is 10.100.xxx.11 there is a machine stick with this computer, ip is 10.100.xxx.12 so, 10.100.xxx.11 and... (3 Replies)
Discussion started by: kyhah
3 Replies

2. Solaris

Solaris zone routing table

Does anyone know how to delete a an ip off the routing table ? i tried route delete 10.0.0.0 and gateway but it still comes back. i have 2 zones sharing one interface. help... (4 Replies)
Discussion started by: 23patrick
4 Replies

3. IP Networking

solaris 8 networking routing

hi all, how do i make sure that the new routing should take effect on the os memory right away? what should i run after i add all the new "route add ....". I have an example below: bash-2.03# netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface... (1 Reply)
Discussion started by: itik
1 Replies

4. Solaris

Routing problem of Solaris

Hi, I got problem of Sun Solaris 8 routing. IP of SunA is 10.16.64.164, and have routing table: 10.16.64.0 10.16.64.164 U 1 19236 bge1 10.6.0.0 10.6.0.3 U 1 16534 bge0 224.0.0.0 10.6.0.3 U 1 ... (4 Replies)
Discussion started by: milo
4 Replies

5. Solaris

ip routing in solaris

I have a SUN ultra 5 machine running Solaris 6. it has two ethernet interfaces qe0 192.168.0.111 and qe1 192.168.1.111 the two subnets are 192.168.0.111 255.255.255.0 192.168.1.111 255.255.255.0 the specified routes are add route -net 192.168.0.0 255.255.255.0 192.168.0.111 add route... (3 Replies)
Discussion started by: adol65
3 Replies

6. IP Networking

solaris routing between two networks

ce0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2 inet 10.162.212.132 netmask ffffff00 broadcast 10.162.212.255 ether 0:14:4f:55:82:9 ce1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3 inet 10.231.11.232 netmask... (1 Reply)
Discussion started by: busyboy
1 Replies

7. Ubuntu

Routing trouble between multiple networks

Hi everyone, Hopefully there is someone here that can help me with the problem I got. At my office I have 1 ubuntu firewall/gateway and several networks. On the firewall/gateway I have three network cards, one for internet, one for network 192.168.100.0 and one for network 172.20.1.0 We... (0 Replies)
Discussion started by: thbor83
0 Replies

8. Solaris

Solaris Routing

Hello All, Problem is that redundancy doesn't work, probably a routing issue I need to get sorted out When 172.29.11.x net is down, neither node3 nor node4 is trying 172.29.12.x network,The problem lies in network 172.29.13.x if 172.29.11.x network is down, node3/node4 should route to... (6 Replies)
Discussion started by: nadeemahmed
6 Replies
install-solaris(1M)													       install-solaris(1M)

NAME
install-solaris - install the Solaris operating system SYNOPSIS
install-solaris install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation, install-solaris invokes either a text-based installer or a graphical installer. The following minimum requirements for physical memory dictate which features are available during installation: For SPARC machines: 128 MB Minimum physical memory for all installation types 128 MB Minimum physical memory required for windowing system 384 MB Minimum physical memory required for graphical-based installation For x86 machines: 256 MB Minimum physical memory for all installation types 256 MB Minimum physical memory required for windowing system 512 MB Minimum physical memory required for graphical-based installation In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea- tures available. install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more details. install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the installation media. Refer to the for disk space requirements. Refer to the for more information on the various menus and selections. See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcdrom (Solaris instal- | | |lation media) | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ pkginfo(1), install(1M), pkgadd(1M), attributes(5) It is advisable to exit install-solaris by means of the exit options in the install-solaris menus. 23 Sep 2005 install-solaris(1M)
All times are GMT -4. The time now is 01:33 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy