01-11-2011
SVM Problem Regarding /var
Hi Guys!
I am facing Problem with SVM I mention the problem below:
I have Sunfire V210 machine and the partitions are as follows:
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 6134 29.77GB (6135/0/0) 62429760
1 swap wu 6135 - 8195 10.00GB (2061/0/0) 20972736
2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
3 var wm 8196 - 10256 10.00GB (2061/0/0) 20972736
4 unassigned wm 10257 - 11287 5.00GB (1031/0/0) 10491456
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 11288 - 11348 303.09MB (61/0/0) 620736
All the partions are created as a metadevice or mirror except /var have alook at my /etcvfstab file
"/etc/vfstab" 13 lines, 451 characters #devicedevicemountFS fsck mount mount
#to mountto fsckpointtype pass at boot options
#
fd -/dev/fd fd -no -
/proc -/proc proc -no -
/dev/md/dsk/d1 --swap -no -
/dev/md/dsk/d0 /dev/md/rdsk/d0 /ufs 1no -
/dev/md/dsk/d3 /dev/md/rdsk/d3 /var ufs 1no -
/dev/md/dsk/d4 /dev/md/rdsk/d4 /test ufs -yes -
/devices-/devicesdevfs -no -
ctfs -/system/contractctfs -no -
objfs -/system/object objfs -no -
swap -/tmp tmpfs -yes -
After that when i reboot my Machine I am on maintenance Mode
The /var file system (/dev/md/rdsk/d3) is being checked.
WARNING - Unable to repair the /var filesystem. Run fsck
manually (fsck -F ufs /dev/md/rdsk/d3).
Jan 7 06:00:53 svc.startd[7]: svc:/system/filesystem/minimal:default: Method "/lib/svc/method/fs-minimal" failed with exit status 95.
Jan 7 06:00:53 svc.startd[7]: system/filesystem/minimal:default failed fatally: transitioned to maintenance (see 'svcs -xv' for details)
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass): Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass): Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass):
single-user privilege assigned to /dev/console.
Entering System Maintenance Mode
Please reply me ASAP
Thanks
10 More Discussions You Might Find Interesting
1. Shell Programming and Scripting
Hi!
I strated to script since 1 month and I don't have much expirience but this thing here is strange
I have a script where I want to store a svn command in a var to check it later
so it's like this
#!/bin/sh
list=`ssh itadmin@192.168.1.200 "ls /home/svn"` # this stores the list of... (13 Replies)
Discussion started by: ruben.rodrigues
13 Replies
2. Shell Programming and Scripting
Greetings,
I've visited this forums for a long time and normally got an right answer but this time my problem doesn't seem to go away. What I'm trying to do is the following:
VAR="\n\nline1\nline2\nline3\nline4\nline5\nline6\nline7\n\n"
(The count of newlines is varying!)
If I echo this i... (3 Replies)
Discussion started by: ph1l
3 Replies
3. UNIX for Dummies Questions & Answers
Hello, i have a problem. i have a domain name hosted on a server and it goes very slow and sometimes down.
I looked on the processes running and on the netstat status and i discovered that each time there is a slowness or a downtime is caused by:
/var/run/dbus/system_bus_socket
many of these... (9 Replies)
Discussion started by: dan8354544
9 Replies
4. Solaris
hi all,
i am using solaris 5.10 on sun blade 150 and i am trying to configure diskset in sun volume manager. When i fire the following command, it says some rpc related error.
bash-3.00# metaset -s kingston -a -h u15_9
metaset: u15_9: metad client create: RPC: Program not registered
how to... (4 Replies)
Discussion started by: kingston
4 Replies
5. Solaris
HI,
I added by error to a submirror some disks :
metattach d53 c2t90d0s0 c2t90d1s0 ... instead of doing a stripe by disk (like that) :
metattach d53 c2t90d0s0
metattach d53 c2t90d1s0
..
then, I did a growfs -M to expand FS and the size isn't correct.
I tried to launch a... (1 Reply)
Discussion started by: phil.nakache
1 Replies
6. Solaris
Hi friends,
I'm newbie to SVM.
Just wanna try installed it on one of our server (to do mirroring for disk0 and disk1) but i think im lost until now. :(
the steps i've taken is as below:-
1.prtvtoc /dev/rdsk/c1t0d0s2 | fmthard -s - /dev/rdsk/c1t1d0s2
2.metadb -a -c 3 -f c1t0d0s7... (3 Replies)
Discussion started by: kronenose
3 Replies
7. Solaris
Hi all,
I got the following error message from solaris 10 system.
Security Violations
=-=-=-=-=-=-=-=-=-=
Jun 1 01:48:21 unix009 scsi: ASC: 0x44 (internal target failure), ASCQ: 0x0, FRU: 0xbc
The following are from /var/adm/messages
Jun 1 01:48:21 unix009 scsi: WARNING:... (7 Replies)
Discussion started by: lramsb4u
7 Replies
8. Ubuntu
Hi,
There is no "administrator" file in "/var/mail" directory........
can any one tell me what could be the reason for that?...and also how to resolve that???
Thanks,
~Kavi (4 Replies)
Discussion started by: kavi.mogu
4 Replies
9. Solaris
hi all
please help me with the following
i am new to solaris
i want to umount /test mount point and make it 8gb each i.e. /test1 and /test2 and using SVM wants to make RAID5
bash-3.00# df -h
Filesystem size used avail capacity Mounted on
/dev/dsk/c0t0d0s0 6.9G ... (2 Replies)
Discussion started by: nikhil kasar
2 Replies
10. Solaris
Hi
I am new to live upgrade.
I would like to tell you about my new setup, where my boot disk(c0d0) is mirrored with secondary disk(c0d1). I have remove the secondary whole disk(C0d1) from the mirror, so that I can do live upgrade on this secondary disk.
I have done live upgrade on s0 partition... (3 Replies)
Discussion started by: amity
3 Replies
LEARN ABOUT DEBIAN
celeste_standalone
CELESTE_STANDALONE(1) HUGIN CELESTE_STANDALONE(1)
NAME
celeste_standalone - Cloud identification
SYNOPSIS
celeste_standalone [options] image1 image2 [..]
DESCRIPTION
Celeste has been trained using Support vector machine techniques to identify clouds in photos and remove control points from these areas.
celeste_standalone is a command-line tool with all the same functionality as Celeste in hugin.
Simple usage is to just 'clean' an existing project file:
celeste_standalone -i project.pto -o project.pto
OPTIONS
-i <filename>
Input Hugin PTO file. Control points over SVM threshold will be removed before being written to the output file. If -m is set to 1,
images in the file will be also be masked.
-o <filename>
Output Hugin PTO file. Default: '<filename>_celeste.pto'
-d <filename>
SVM model file. Default: 'data/celeste.model'
-s <int>
Maximum dimension for re-sized image prior to processing. A higher value will increase the resolution of the mask but is significantly
slower. Default: 800
-t <float>
SVM threshold. Raise this value to remove fewer control points, lower it to remove more. Range 0 to 1. Default: 0.5
-m <1|0>
Create masks when processing Hugin PTO file. Default: 0
-f <string>
Mask file format. Options are PNG, JPEG, BMP, GIF and TIFF. Default: PNG
-r <1|0>
Filter radius. 0 = large (more accurate), 1 = small (higher resolution mask, slower, less accurate). Default: 0
-h Print usage.
AUTHORS
Written by Tim Nugent.
"Version: 2011.4.0" 2011-12-02 CELESTE_STANDALONE(1)